How to properly glue wallpaper paper: Tips builders

Today, still paper wallpapers are the leaders of sales due to their undeniable advantages. They are eco-friendly, so they allow the walls to breathe, do not emit unpleasant odors. The existing huge selection of various colors and low cost of this material can satisfy the taste of the most demanding buyer. Knowing how to properly glue wallpaper paper, any nelenivy owner can fully cope with this task without resorting to the help of professionals. This will become even easier if you take into account some of the advice of builders on how to do the work correctly so that you can admire the pasted walls for a long time.

Wall Preparation

From how thoroughly the surface of the wall is scrupulously prepared, the quality of pasting it with wallpaper is largely dependent. First you need to remove all old covers. At first they are torn dry, and what remains will be watered and scraped with a spatula. Wet the wallpaper better with a brush with natural bristles. The paper surface is slightly damaged, which facilitates the absorption of water. It makes no sense to buy the advertised special gels and solutions for this purpose. As practice shows, the result from them is not more than the usual warm water. Remove the old wallpaper you need very carefully, all without a trace. Otherwise, when a new coating is applied, the remaining pieces move away from the wall forming bubbles. Remains of wallpaper from the floor should be cleaned immediately, until they have not dried up.

After cleaning the wall, you must carefully fill all the irregularities and cracks.

How to cut the wallpaper

It is very important before gluing the paper wallpaper, it is correct to cut them (cut). If they do not require the selection of a picture, then the desired length of the strip is simply unwound from the roll and cut. To do this, you need to face down, leaving a small allowance for trimming. If the wallpaper has a picture, it is necessary to select adjacent strips in such a way that the pattern on them coincides. It is very important to unwind the roll in the same direction. The surface on which the cutting is performed should be clean and smooth at the same time. Holding on to the cut, you need to push the roll, unwinding the canvas to the desired length. Then tape measure the exact length and make a mark with a pencil. After that, you should bend the strip, combining the sides and smoothing the bend, which later becomes an incision. You must fold the canvas with a pattern. In order not to deform the wallpaper under its own weight, the number of strips in the stack should not be more than ten pieces.

Application of glue

The glue is selected according to the type of wallpaper. Usually, the label of the recommended glue is indicated on the instructions for gluing. For a heavy coating, for example, the use of a special formulation intended for this type of material is required.

How correctly to glue wallpaper paper, so you do not have to re-paste them later? It is very important to properly prepare the adhesive composition. Dry glue is diluted in water at room temperature. To do this, in a plastic bucket or a basin, you need to create a whirlpool with a brush on a long handle and fill the formed funnel with glue gradually, without stopping to mix thoroughly. Dilution of the glue in cold water can lead to the appearance of lumps. And too warm water will affect the quality of the glue, in addition, the wallpaper when applying a warm composition can get wet and creep along the seams after drying.

If the wallpaper base is paper, then the glue should be applied directly to the canvas, leaving it for a while to allow it to soak. The swelling time depends on the thickness of the wallpaper and, as a rule, is indicated on their packaging. More dense varieties require more time for impregnation. Experienced masters know how to properly glue wallpaper paper: it always requires a very large accuracy, because such wallpapers do not differ strength and durability. At the slightest inadvertent movement, they can tear.

Much easier to do the gluing of non-woven wallpaper. Glue in this case is not applied to the canvas, but directly to the wall. To do this, you can use a roller or a wide brush.

How to glue a paper wallpaper

Starting to glue the wallpaper is recommended from the corner closest to the window. And do it not from the very corner. At the beginning, you need to use a level and a ruler to draw a vertical strip along the entire wall with a pencil at a short distance from it. It is from this trait that the gluing should begin. How best to glue paper wallpaper? It is much more convenient to do this together, when one on the ladder aligns the upper part of the canvas, and the second monitors that the edge of the strip is aligned with the vertical line. If you accidentally get glue on the front side of the wallpaper, it should be wiped off immediately with a dry soft cloth. The skirting board should be removed before gluing the walls, if possible. Many know how to glue the paper wallpaper correctly. Nevertheless, the presence of sockets and switches on the wall can create certain difficulties. Before starting work, these elements must be removed, without forgetting to de-energize the room. Wallpaper is glued directly to the opening for the outlet, and then in this place is made a neat cutout. When the work is completed, the sockets and switches are put in place.

Features of gluing duplex wallpaper

Duplex wallpaper is classified as heavy, therefore require the use of specialized glue, designed specifically for such a coating. They consist of several paper layers and are covered with a special composition that protects them from the destructive effects of the external environment. Such wallpaper can be used even in rooms with high humidity. Having a fairly large thickness, they can perfectly hide all the irregularities and defects in the surface of the wall. Often, the fabric has to withstand a long time for impregnation with glue, before gluing it on the wall. There are no specific recommendations on how to properly glue a duplex paper wallpaper. The principle of pasting remains the same. Cloth, smeared with glue, is applied by the upper end to the wall, the edge of it is aligned along the drawn vertical line, then carefully ironed with a roller or a dry rag. Smoothing movements should be done in the direction from the center to the edge of the strip, achieving tight gluing and the absence of air bubbles.

How to glue a paper embossed wallpaper

Embossed wallpaper has a relief pattern, which is created using special rollers at high pressure on the paper. Due to this texture it is easy to hide all the roughness and roughness of the wall. Since the embossed wallpaper also refers to the category of heavy, for their gluing you will need a special glue, in which you can add more PVA for breeding during breeding.

Foamed Wallpaper

Such wallpapers are a kind of vinyl and are manufactured by screen printing. They have a slightly rough, gleaming surface, perfectly hide irregularities, do not stretch. There are some features of how to glue paper foamed wallpaper. Such wallpaper perfectly adhere to any surface, whether it's plaster or paint. The only exception is a wall covered with lime or whitewash. Adhesive should be used only by specialized, recommended by the manufacturer. Foamed wallpaper is not able to pass moisture, therefore, to prevent the appearance of mold, the wall surface should be treated with antifungal impregnation.

Butterflies wallpapering

This method is the most common, but not everyone knows how to glue paper butt-paper properly. For this, a number of important rules must be observed. You should start from the corner of the wall on which the window is located. The first band should be oriented not at an angle that may be curved, but at a plumb line or level. The wallpaper may have different characteristics, it must be taken into account. Each next web is parallel to the previous one in such a way that the edges touch as tightly as possible. In this case, do not immediately tightly adhere the strip, so that it was possible to correct it in one direction or the other. The edges of the strip must be very well etched with glue. Vertical should be checked after the labeling of each second strip.

About how to properly glue wallpaper paper, you can learn from experts, but learn how to do it impeccably can only be experienced.

And finally, a few rules that will help avoid various unpleasant situations when pasting walls. Before carrying out the work, it is necessary to turn off the electricity. The windows must be tightly closed to prevent any drafts. The room in which repairs are to be carried out must be warm and dry.