How to polish plexiglass at home: step by step instructions and reviews

Plexiglas is widely used in various industries. Of this material, partitions, inspection windows, shop windows, telescopes, accessories for vehicles, microscopes, lamps, as well as construction and medical equipment are manufactured. Plexiglass has many advantages. However, the material must be well looked after. Only in this case the product will last long enough. So, how to polish the plexiglass at home?

What is it for?

Plexiglas is considered a strong and reliable material. However, over time, small scratches, chips and cuts appear on it. This is due to the mechanical impact on the product during its use. To restore the Plexiglas attractive appearance, it is necessary to polish it.

It should be noted that the procedure itself is not complicated. But at the same time it is a scrupulous and long-lasting occupation that requires patience and endurance. In addition, strong, aggressive substances can not be used for the treatment of Plexiglas. As the reviews show, after the application of such funds, the material may become dull and cloudy.

What is needed?

So, how to polish Plexiglass and what is required for this? Many people ask this question. Processing the material is a simple process. The result after manual polishing is much better than after using special equipment that is capable of heating the material and melting its surface. Before processing, prepare all necessary materials and tools. This will require:

1. A sharp scalpel or blade of a knife.
2. Soft sponge or cloth.
3. Emery paper with the marking of 2000 and 800.
4. Polishing paste.
5. Paper.
6. Paint tape on paper basis.

Preparing plexiglass for polishing

Since polishing plexiglass, without removing it from the product, it is impossible, then it should be carefully extracted. After that, it is necessary to paste the edges with adhesive tape. This will protect them from chipping and other damage.

Stick adhesive tape should be overlapped: from 1 to 2 millimeters. If the Plexiglas can not be removed from the product, then you have to work with extreme caution. In this case tape should be glued to all the parts located next to the surface being treated.

The polishing process

How to polish the plexiglass so that it becomes as new? To begin with, the surface must be treated with emery paper labeled 800. At the same time, add a little water. Plexiglas should be treated evenly. In the end, the material needs to be wiped, and you can evaluate the result. In the end, you should get a frosted plexiglass. It is natural. If the surface is unevenly matte, then it is worth continuing the treatment. It should be ensured that ruts are not formed.

When the surface is completely matte, you can proceed to the next step. Since it is necessary to polish Plexiglas to its full transparency, it is necessary to use sandpaper with the marking 2000. The material should be processed throughout the entire area. Plexiglas should become more transparent. At the same time, there should be no scratches on its surface. If you find a defect, then it should be sanded with its emery paper labeled 800.

The final stage of polishing

How to polish plexiglass at home? In such cases, it is better to use a special paste. It is necessary to apply a small amount of polishing compound to a piece of soft cloth, and then to handle the plexiglas, making measured accurate movements. After a while, the material will begin to acquire shine.

In conclusion, we should carefully consider the treated surface. If on it the scratch was found out, it is necessary again to grind and polish a product. If the result completely satisfies you, you can carefully remove the adhesive tape. After this, carefully polish the edges of the part. As the reviews show, this treatment allows you to return the products from plexiglass an attractive look. The material becomes transparent and without scratches.

Polishing with GOI paste

How to polish the plexiglass with your own hands, using GOI paste? Felt is required for work. If such material is not available, then it can be replaced with a woolen insole, a piece of felt boots or cotton wool.

The polishing process is quite simple. It is necessary to put a little bit of GOI paste on a piece of material and gently work the surface. Polish the plexiglass until you get the desired result.

If the material is very old, it should be sanded before processing with GOI paste. You can use sandpaper for this. In this case, the skin should be very shallow. Surface of Plexiglas before grinding should be moistened from the spray gun. It is necessary to ensure that the material does not dry out during the treatment. Otherwise, scratches form on the surface. Only after polishing can you begin polishing the Plexiglas GOI paste.

In conclusion

Now you know how to polish plexiglas from scratches, chips and other mechanical damages. As the reviews show, work with the material should be neat. After all, any embarrassing movement can leave a trace on its surface.

To polish Plexiglas, you can use polish, designed for processing vehicles. It is enough to apply the product on the surface of the material, and then rub it with a piece of felt. However, before the procedure, experts recommend testing the polish in a small area. In the end, you should rub the surface with liquid oil.