How to make a fence of corrugated board: advice and recommendations

At present, there is a huge number of different building materials. At the same time, most of them have a lot of appointments and can be applied at all stages of the erection of the building or its cladding. For example, corrugated board for fences can be used as a roofing material or for creating partitions inside the room. It is also worth noting that this material was originally developed as a facing material, and due to its multifunctionality, it owes its ability to tolerate the environment and ease of installation.

At the same time, the simplest fence made of corrugated board, the price of which will be much lower than the concrete structure, can compete with other materials designed for this purpose not only for its reliability and practicality, but also for its beauty. However, it must be taken into account that there are a huge number of different types of this material. They differ from each other in the thickness of the metal, the pattern of stamping, decorative pruning and color.

Types of profile flooring

When answering the question about how to make a fence of corrugated board, you should first pay attention to the material itself. Almost any profile is suitable for this type of work. However, it should be noted that if the budget is small, then the simplest and cheapest material can be used. If the finances are not a problem, then you can select a profile with a trimmed top edge. You can also order a sheet with a drawing on it that does not burn out in the sun and can transmit high-resolution images.

Foundation

One of the most important processes in leadership, how to make a fence of corrugated board, is the foundation. It should not be very deep, as this will lead to over-consumption of concrete, but at the same time able to transfer the load of the entire structure. If the fence is planned to be made using poles, then concreting can be done pointwise. However, one should not forget that it is necessary to organize a drain for water, which will be on the site.

Types of fence

Determining how to make a fence of corrugated board, you should consider the two most common methods. The first involves the use of a profile pipe or concrete columns, on which sheets will be fastened. This method is the simplest and does not require large financial costs. The second method is also designed to create spans using pillars or columns. In doing so, use a certain amount of bricks to give the product a solid foundation and a beautiful appearance.

Gate

All instructions how to make a fence of profiled sheeting, pay special attention to the installation of the gate. The fence in these places should be strengthened additionally, thus it is necessary to arrange an aperture in places of connection of flights. Therefore, it is best to begin construction precisely from the gate, so the construction will be more reliable and will have a nice appearance without small inserts and pieces. When used for the construction of corrugated board, the same material should be used for the manufacture of the gate itself and even a small anteroom at the entrance.