Metal siding for wood: characteristics, advantages, installation features

Metal siding under a tree is a panel that simulates a natural tree or a rounded log. This material is made of galvanized steel with a polymer coating. To date, metal siding for wood is the most in demand because it is cheaper than natural wood and does not require any renovation costs. Used for facing the facades of industrial, commercial and public buildings, as well as for casing cottages, private houses, villas. This material gives the structure a presentable appearance and protects from the effects of atmospheric factors.

Design

A feature of the design of metal siding under a bar or log is its shape, which simulates a log cabin wall. The basis is a galvanized metal panel with a rounded shape 0.4-0.7 mm thick, manufactured by stamping. Its working width is 188 mm, the total width is 211 mm, and the length is 0.5-6 m.

This product is passivated and primed. Passivation protects the siding panel from corrosion, and priming increases the adhesion of the substrate to the polymer protective layer. For this, polymers such as Pural, Plastisol, Polyurethane, Polyester are used, which not only perform a protective function, but also ensure the attractiveness of the material. Its high-quality types are also covered with protective varnish.

Description and price of the material

Metal siding-beam is made in the coloring of natural wood of various shades. The panels are equipped with additional elements that may have the color of the main product or differ from it. Metallosiding is lightweight, easy to install and easy to transport. Its technical characteristics meet high requirements.

How much does metal siding cost? The price depends on different parameters. The lining of the house with the material imitating round logs will be much cheaper than the cladding of the walls with natural wood. Metal siding, whose price averages only 280-350 rubles per 1 m ² (depending on the type of coverage), allows the walls to "breathe".

Material Advantages

Metal siding for wood has such advantages:

• It is environmentally friendly and safe for human health;
• Is durable and durable, its service life is up to 50 years;
• Has resistance to corrosion, temperature changes and burnout;
• Incombustible;
• Easy to install and maintain.

Wall Preparation

The technology of metal-siding installation under a tree provides for such stages: preparation of walls and their lining.

If there is mold on the surface, after removing it, treat the wall with an antiseptic. Before installing the metal siding, you must install a metal or wooden crate on the walls. For its production use a galvanized metal profile or bars of wood with a cross section of 40 to 50 mm. The step distance of the crate is 400 mm.

The fabrication of the framework for metal siding, the photo of which is presented in the article, is made as follows. On the markings, applied in advance on the walls of the house, brackets are fixed.

When the building is insulated over the holders, a thermal insulation material is installed and covered with a windproof film. Then to the brackets are fastened wooden bars or metal profiles, which are the basis of the crate. If the walls have a large area, then for stiffness add cross bars.

The erection of the flooring is not required if the metal siding under the tree is used for the finishing of capital structures having concrete or brick surfaces. Then it can be installed directly on these bases.

Sheathing of walls

Metal siding, the installation instruction of which does not imply performing any technically complex actions, is easy to install. This process is not much different from mounting other models. You can execute the cladding yourself, without involving specialists, if you follow the technology.

So, the installation of metal siding under the tree is made from the bottom up. In the lower part, above the socle of the building, the starting bar is set according to the level. Fasten it, like all subsequent panels, with special screws that do not tighten to the stop, but leave a gap of 0.8 mm. The first plate is hooked for the lock, which is in the starting plate, and fix it. The next row is attached after the previous one is installed. The top row of one side is glued to the bottom, and on the other - attached self-tapping screws.

In the upper part of the wall, a fixing bar or tide is installed. The corners are covered with special slats or PVC pads that mimic the ends of the logs. Depending on the shape, additional elements, such as external and internal corners, can be mounted before installing the panels or after installing them.

Conduct a beautiful high-quality wall lining is not difficult, if you use metal siding for this. Photo of the house, which is made of this material, is in this article.

Care

Metal siding is the most practical of all existing species. This cladding material does not require special maintenance during operation. Clear it from dust or various contaminants using normal clean water.

From mechanical damage it can be secured by making a low fence around the house, and installing a drainage system. If, however, damage has occurred on the coating, they should be repaired with a suitable paint.

Using metal siding under a tree, you can quickly make a beautiful facade, which will provide a reliable protection of buildings.