How to knit a "carrot" knot correctly. Its main advantages and disadvantages

Fishing node "carrot" is considered to be one of the most reliable for connecting braids with a monolayer. This method is effective and simple for linking fishing line and cord, which are characterized by a rigid and slippery surface. If you connect such materials with ordinary knots, then often the cord slips. As a rule, this occurs in the midst of fishing and can lead to loss of catch. It is in such cases that professional fishermen use the "carrot" knot.

This fastening is quite strong and compact, the unit easily passes through the rings of feeder and carp rods. Its resistance is enhanced by the thickened site of the knot. That is why it is so popular with fishermen. However, it is necessary to understand in detail what is and how to knit the "carrot" knot.

Site Benefits

No wonder this type of connection is so in demand among fishermen. There are a number of advantages that distinguish the "carrot" among the remaining nodes:

• Simplicity. This mount does not require special skills. Even a novice fisherman can easily figure out how to knit a carrot knot (photo and step-by-step instructions will be enough).
• The knot freely passes through the rings of the rods.
• This type of connection does not terminate, but there is no slippage.
• Reliability. Numerous reviews and demand among fishermen are the main proof of the high strength of the knot.

However, it is necessary to take into account the fact that all of the above advantages appear only if you know how to knit the "carrot" knot correctly.

disadvantages

In addition to the numerous advantages, "carrot" has certain disadvantages:

• According to the rules this type of fastening requires bandaging through several fishing trips, otherwise the knot can wear out.
• "Carrot" requires a thorough and long knitting, otherwise it will quickly crawl.
• In the correct sequence, the coils fit quite problematically, and this in turn also affects the strength of the assembly.

How to knit a carrot knot: scheme

To fasten this reliable fastening is quite simple. There are several ways to do it, however, in practice, only one is used most often. So, knot the "carrot" knit slowly, slowly and adhering to the basic rules and sequence of actions:

1. First of all, make a loop about 5-7 cm from the braids, but do not need to tighten it.
2. In the resulting loop pass the main line and pull it out for 15-20 cm for further manipulation.
3. Further, according to the illustration, the monolayer performs 8-10 revolutions around the loop. In this case, the loops should lie flat and go one after another.
4. Completing the last turn, the fishing line is turned over and starts to turn in the opposite direction. After completing 10 turns, the line is stretched into the main loop from the braid (in the end, it must be tightened).

As a result, when properly executed, a reliable node should be obtained, which increases the strength of the line more than 70%. In this case, you should remember the basic rule: before the implementation of the site, all materials used must be moistened. It depends on this, how much the "carrot" node will be durable and practical. Moreover, such fastening can burn out due to improper execution.

Tightening the knot

To ensure that the resulting site has served as long as possible, it is important not only to know how to knit the "carrot" knot correctly, it must also be tightened correctly. Adhering to some rules, this will not be difficult.

1. It is necessary to understand that the knot begins to be tightened only when all the turns in both directions are fulfilled.
2. It is necessary to grasp both ends and pull them evenly.
3. Connections tighten with all accuracy, moving the ribs with the forefinger and thumb. In this case, the unit must be lubricated with water.
4. After completion of work, there are two free ends. The tip of the line should be cut off at the base, and the end of the braid should look no more than 3 mm because of the tendency to swelling.
5. If desired, for greater strength, the knot can be greased with glue - so it will become smoother. In this case, the second end should be cut off at the very base, but you need to do it carefully so as not to damage the villus of the knot.

Important nuances

To ensure this maximum strength, you must adhere to certain rules - they affect the strength and strength of the node:

• That the knot is not deformed, it is mandatory to wrap the main line with a pigtail around the shock leader.
• To prevent burning out from strong friction, the line and the lace are wetted with water.
• It is necessary to ensure that the first loop is not tightened until the 10 turns are executed in the opposite direction and that the monolayer is not put into it.
• To ensure that the assembly is well tightened, and the coils are snugly attached to the loop, it is necessary to help to tighten the coils. For this, you need to make certain movements with your hands.

If you understand how to knit a "carrot" knot, you can make a strong attachment that will pass through the rods. It is so popular among fishermen due to its simplicity of execution and good stability.