Funny master class: how to make a palm from a bottle

Plastic bottles are a very fertile material for various kinds of handicrafts, and in general in the household is suitable. From them you can make flowerpots for indoor plants, organize a drip irrigation system, a stand for pencils and pens, a lamp shade for a lamp and much more. For example, an exotic palm tree in the yard.

Preparatory steps

First, you need to learn how to make a palm from a bottle, and prepare an auxiliary material. First, the more empty plastic containers you have, the better. The most suitable bottles are brown, black and green, but you can also use other colors. Secondly, you will need a strong wire: one piece is long, strong, which could be stuck into the ground, and three more flexible, different lengths. The first will become the stem for the trunk, and the rest will be useful for the crown. The next step to learning how to make a palm from a bottle is the processing of the plastic itself. Cut the brown bottles in relation to the bottom a little less than half. Just make the curly cutouts (teeth) and slightly curl outwards. This will create the effect of a scaly texture of the trunk. The bottom of each hole so that they can be strung on the rod. Prepare the "leaves" - this is the last step in the science of how to make a palm from a bottle. Cut the green plastic along, not reaching the neck, then cut each half into the type of palm leaves. Stoppers at all unscrew, except for those bottles which will be used by the last. In these plugs, drill holes for the wire.

Let's compose an exotic "plant"

Choose a suitable place in your garden or on the playground near the house. Insert a deeper pin-base so that it is firmly fixed in the ground. Now string one by one of the blanks for the trunk. If they are brown and black, you can alternate: this is good advice on how to make a palm from a bottle more interesting and elegant. At the very end of the process, you need to fix the wire for the crown. Fold the tip of the trunk into the loop with the help of pliers, insert the pre-cut lengths in turn, spread them in different directions and also bend - you will get a loop in the loop. This is how the palm is made from plastic bottles step by step, as we told. In passing, let's clarify: the barrel can be constructed in a different way. If you have a dry tree in the garden, cut off its branches, leaving a few under the leaves, reduce to the desired height. Beat the bottom of the bottoms bottles - the relief surface outward. Use nails for fastening. They will be invisible, and it turns out an exotic beauty is very even natural. But back to our version. Now it is necessary to string green preforms. Put them on the wire with their necks down. Try to make sure that, as in the case of the barrel, the ends of the wire segments remain free. And, putting on the last "sheet" with a stopper, make a clamp with the help of the tool, so that the crown does not fall off. The same must be done in two other cases. Everything, a palm from plastic bottles, the photo of which you see, is ready!

Now you can enjoy your own "oasis".