How to glue the wallpaper in the corners. Complicated moments of simple work

Pasting wallpaper on the room is a common occupation not only among the builder-builders, but also the amateur practitioners. Very many glued and pasted the wallpaper in their apartments. The process is simple, interesting and exciting, and most importantly, with the help of new wallpapers you can completely change not only the color of the room, but its design and "mood."

However, as in all simple processes, with wall and ceiling wallpapering, there are "pitfalls", some difficulties associated with the specifics of the work, which are important to know and take into account in the process of labor in order to obtain a qualitative result.

So, after choosing wallpaper, buying them and carefully studying the instructions on the packaging by the method of gluing, we proceed to work. The wallpaper never starts to glue from the corner, although it would seem convenient. But the corners in the rooms are usually 99% uneven. If you start to glue from the corner, the pasted stripes will be chamfered. This is especially noticeable when the wallpaper is striped. Therefore, the work starts from the window or doorway, having measured the level with an even vertical direction. How to glue the wallpaper in the corners to glue them and keep a flat vertical? Here there are certain rules.

How to glue wallpapers in corners

Due to the fact that the corner is uneven, you can not glue the wallpaper in the corner buttock: they will not properly join, folds and bubbles will appear. Therefore, after gluing the last solid strip in front of the corner on the wall, measure the distance from it to the corner, add 200 mm and cut off the strip of wallpaper of the resulting width. Apply this strip, carefully rubbing the corner with a rubber spatula and roller, and fold a part of the strip onto the next wall. Then continue to glue the entire strip of wallpaper from the corner, along the next wall, by defining the level of the vertical line. The first strip from the corner is pasted on the previous one.

Tight wallpaper after gluing is cut with a sharp knife along the edge, grabbing both layers. Bend the cut, remove the excess layer from the wall and glue the strip, smoothing the joint well. If the work is done carefully, the seam will be invisible. Thin paper wallpaper glue with the admission. Only the width of the inlet should not exceed one and a half centimeters.

A difficult question, how to glue the wallpaper in the corners, is solved quite simply. In addition to internal, there are external corners, protrusions. How to glue the wallpaper in the corners of the outside? The principle is the same. Part of the strip is bent to the wall, and the next strip is glued overlap. Then, cut both the stripes along an even vertical, the superfluous wallpaper is removed, and the joint of the strips is carefully glued.

Another difficult question: how to glue wallpaper on the ceiling? There are certain difficulties here. To facilitate the work, it is important to pre-prepare the surface of the ceiling: align it, primetovat and dry it. As a primer, the same wallpaper paste, slightly diluted with water, is often used. Wallpapers on the ceiling glue along the surface from the window to the door, buttock. It is better to choose a special wallpaper for painting, then small flaws, allowed during gluing, will disappear under a layer of paint. Cut the strip of the desired length, the part of the ceiling is greased with very thick glue, the strip rolls to the roll and the edge of the ceiling with the wall begins to paste the wallpaper, gradually unwinding the roll. Wallpaper should be especially carefully smoothed, preventing the formation of bubbles and creases. Before applying wallpaper, the ceiling lights must be removed, so that they do not interfere with the work.

Another difficult question when applying wallpaper: how to glue wallpaper with a picture? First of all, you need to take into account that the drawing, especially the large one, must be carefully combined at the joints of the wallpaper. This leads to the fact that there is a considerable amount of waste, so when buying wallpaper, you should provide some of their stock. Before cutting off the strip of wallpaper, the pattern is combined, and then the strip is cut off.

The complex issues of simple work on the wallpapering are solved quite simply.