How to glue a tile on a tile in the bathroom on the floor and on the wall?

Many people, deciding to make repairs, think about how to glue the tiles on the tiles in the bathroom (as well as in the other, to a large extent, the room where this finishing material is applied). The question is far from idle. And it is not in vain that they are asked by the current home masters. Because such technology actually exists and is very successfully used in repair works. With respect, however, a number of mandatory conditions. About what, actually, and will be discussed in our review.

And why is this necessary?

Indeed, why should I think about how to glue a tile on a tile in the bathroom? Is not it easier to act as it is customary to lay a tile on plastered walls or a moisture-resistant plasterboard or a concrete floor base? We answer: "No!". Imagine for a moment what is the process of removing the old tile? This is a rumble, dust, heavy bags with broken tiles, which also need to be taken out somehow from home. And this is not all troubles.

It's one thing to knock down the old tile. And what will be under it? Dented walls, which then have to be re-plastered. Or, all in the potholes, the floor, which requires re-tie. Therefore, every home master, who is in search of an answer to the question of how to glue a tile in a bathroom on a wall or floor, pursues first and foremost a single goal. This is a saving. Time, strength and money. And if it is possible, then why not, in fact, go on the path of least resistance. So, how to glue a tile on a tile in the bathroom on walls or floor? Read on!

We estimate the feasibility of work

Remember: knowledge of how to properly glue the tiles in the bathroom, will be small. You can do everything strictly in accordance with the requirements of the process and already in a year to look sadly at your bathroom, realizing that you could not save, unfortunately. And so that this does not happen, first of all evaluate the quality of the old coating. Is it able to become a worthy foundation for a new tile? Is it firmly anchored on the floor and wall? And even if everything is visually all right, do not be lazy, arm yourself with a wooden mallet and carefully tap the walls and floor.

And if you suddenly hear a sound resembling rattling - it means that in this place the adhesion of the tile to the base is not reliable enough. Mark these places with a marker, in order to get rid of the tile, which is not trustworthy. If there are not so many such sites, congratulations! You knowingly studied all the materials related to the answer to the question of how to glue the tile on the tile in the bathroom on the wall and floor. You can move from theory to practice. But first we will have to carry out a number of preparatory works.

Substrate preparation

Before you glue the tiles on the tiles in the bathroom, you need, as already mentioned above, to get rid of those sites that do not cause trust. It must be done very carefully. No punchers! Armed with an antediluvian chisel, take a hammer and carefully knock down the old tile. Then all the potholes need to be carefully sealed or the plaster mixture bought in the store, or, in the old manner, a banal solution of sand and cement.

The main thing is that your "patches" should be on the same level with the old tiled surface, rather than hills and humps hanging over it. If you did not manage to do it carefully, well, you'll have to wait. Wait until the solution has completely dried and remove the defects using sandpaper. Are you ready? Excellent! Now take a clean rag and carefully wipe all the old tiles. Done? We move on.

We ensure the strength of the future coating

Since it is unlikely to get a tile on a tile in a bathroom on an old glossy coating, it should be previously subjected to treatment. How? There are three ways to solve the problem.

It is necessary to remove the gloss from the old tile. It's long, hard, and a lot of dirt will remain. Then you need to make a notch on it (the drawbacks are the same) or treated with a special compound. The third method involves the purchase of a primer, which is quite expensive. But since you can not glue the tiles on the tiles in the bathroom without any financial costs, even with the most economical owner, it is more reasonable to dwell on this option. But the process will not take away neither time nor energy. And this miracle-tool "Concrete-contact" is called. The primer will make the old tile rough and provide excellent adhesion to the substrate. Apply the composition with a brush or roller. The main thing is to withstand the exposure time, that is, give the primer a good grasp and dry. It takes about six hours, no more.

Choose glue

So how to glue the tile on the tile? In the bathroom on the walls put tiles and, especially, on the floor, you need a quality adhesive that provides a solid foundation and good adhesion. Therefore, to the issue of his choice, we approach competently, forgetting about saving. A good line-up can not be cheap, so you'll have to put up with the fact that you'll need to pay a pretty impressive amount. However, you do remember: mean what does? That's right - he pays twice. Therefore, we buy tile adhesive only from a well-established manufacturer. Experts advise to pay attention to Ceresit glue. Especially on the brand SM17. This composition is intended for laying tiles on problem surfaces, so for our purposes it will do the best.

Ivsil Profit is also very well recommended. It is designed for laying ceramic granite, which, as is known, requires a special approach to itself. Well, of course, even if this is the limit of extravagance, you can shell out for Vetonit Renovation. It is so good for our purposes, that maybe for a while you can forget about saving. After all, some finishers say that working with him, you can paste a new tile to the old one even without the preliminary processing of "Concrete contact".

We glue the tiles in the bathroom with our own hands

It is worth noting that the very process of laying a new tile on the old one does not differ much from the classical method. The main nuances are just in the processing and preparation of the surface. Further, the algorithm of actions in both cases is practically the same. The only nuance, perhaps, on which it is worth paying attention: we must try to make sure that the seams of the old and new tiles, if possible, do not coincide. You can solve this problem without a special headache - just get a new tile larger than the one that used to please you for many years. In addition, apply the adhesive not to the tile itself, but directly to the wall, even layer. Well, in the rest, follow the usual rules.

You should start from the most prominent angle and from the bottom. Preliminary draw a marking and outline a horizontal line, using for this purpose either a simple plumb line, or already become for many home masters the usual laser level. When laying, use the so-called crosses, necessary to ensure that the seams between the tiles are the same in size. Joint the top, above the door - here it will be visible only to you, and not to your guests, whom you will certainly call in order to show how to glue the tile in the bathroom on the wall and what a wonderful you, it turns out, a specialist.

After the adhesive dries completely (usually it takes several days), remove the crosses and seal the seams with a special solution - the so-called fugue.

How to glue a tile on a tile in the bathroom on the floor?

And here too, there are no special rules. What you should pay attention to? The floor, as a rule, is subjected to much greater loads than the walls, which is understandable, we also go on it every day. Therefore, be careful when applying glue to the surface of the base. You can not allow to remain untreated by the composition of the site, otherwise it is fraught with the fact that over time your new beautiful tile may appear cracks. In addition, it would be advisable to consider such an option as laying diagonally. This method is good because the new coating will be more durable due to a different location of the joints.

And it's very simple. Apply markup by dividing the floor of your bathroom into equal rectangles or squares (depending on its configuration), find the center. Lay the tile so that its corners are aligned with the axes you have drawn. In the future, it will serve as a guide for the following elements. True, there are a lot of pruning with this way of doing the work, but also the strength of the foundation will not cause concern. When you are done, give the tile to dry, and then also seal the seams.

When is the process impossible?

So, we answered positively to the question of whether it is possible to glue the tiles in the bathroom with old tiles. And in what cases is this procedure impossible? First of all, when more than 40% of the old coating is in bad condition. With this version of events, the work will be meaningless. It's easier to wait and spend a little more, but to remove the old tile, prepare the floor and walls and put a new tile covering. You can not use the old tile as a foundation, and in those cases, if it seems to be whole in appearance, but when pressed, it crunches. This indicates that there are emptiness beneath it. And such a surface can not withstand the weight of the new coating for long.

Conclusion

We tried as much as possible to talk about how to use the old tile coating as a basis for a new finishing material. We hope that our information will be useful to you. And you can quickly and without financial loss to repair your bathroom. Own! What is especially valuable today.