How to disable UAC in Windows 7? All ways to disable UAC on Windows 8

If you are tired of constantly pop-up and pop-up messages of threateningly intimidating content, and you are completely confident of impeccable protection of the anti-virus program installed on your machine, then do everything as they tell you! How to disable UAC in Windows 7: they tell you - you do! What could be simpler?

Unclassified Security Division

In order to protect the computer system and not allow "all to pin code where it is not necessary," a special service was developed and introduced into the Windows 7 software environment, the responsibility of which was the process of tracking changes in the "seven" registry. Perhaps you also wondered about how to disable UAC in Windows 7, after multiple and unsuccessful attempts to install an extremely necessary program, the installation of which involves making your own "corrections" to the OS. The tracking service, referred to in the English version of User Account Control, allows you to reduce the level of unauthorized access to a minimum, of course, with obvious manifestations of active action by the user or a self-installing application from the Internet network. Turning off the control, you thereby allow the software at its discretion to produce certain settings in the registry of your operating system. However, the correctness of the UAC depends on some key factors: the novelty of software, its quality value and the certification of purpose. Using the material in this article, you can personally deprive yourself of this security department, the effectiveness of which today is somewhat contrary to user needs. To the question: "Why?" - See the answer below.

Too ran ahead ...

Microsoft's developers rushed to implement a segment of protection for this purpose. Today, this is clear to most users of the "seven", and the G-8's usability suffers no less than the older "sister." Proof of this - often flickering search queries "disable UAC Windows 8". And yet, why did the specialists turn out to be so short-sighted, and why such an utterly senseless participation of the "inferior" security service, which consumes system resources of our machines for nothing? What's most terrible is that the good intentions of the UAC service are driving the crazy users crazy, completely discouraging them from installing anything containing software code, and this, by the way, is all software. So, installing Windows 7, you will have to face the existing problem, and in particular: when installing the old software, the conflict limiting your rights is inevitable, the serious impact of new utilities also falls under the "suspicion" of the OS ... Therefore, seeing the problematic circumstances, the user There is only one thing left: resort to the option of "disabling UAC". It should be noted that it is advisable to neutralize only some components of a useful service. However, the responsibility for the installed software has always been on the user's shoulders.

Forewarned is forearmed

The fact is that the actual solution to the question of how to disable UAC in Windows 7 is actually implemented literally simply. However, before you deactivate the corresponding settings items, you need to understand the following:

• "User Account Control" warns the user about the likelihood of adverse consequences as a result of changes to the system registry.
• You need to be aware of the danger factor by disabling the UAC service.
• The majority of users can not determine the "pest" by the attributes, and the professional, probably, will have to think a little about the advisability of the metamorphosis introduced into the computer's registry by the program being installed.

From all the above written it is possible to draw a conclusion: it is impossible to "dismiss" the security department completely, it is expedient to have an elementary "reduction". In other words, it's more rational to disable UAC Windows 8.1 partially, without affecting critical system parameters. This will allow you to get rid of annoying messages. Let us turn to the practical part of our review.

Effective administration by example
The G8

• By pressing the combination of keys Win + Q, the user will be given the opportunity to perform a search.
• Enter - UAC. Then press Enter.
• Next, select the "Parameters" tab, on the left side of the interface, click on the search result: "Changing parameters ... entries".
• In the "Account Management Settings ..." menu, drag the slider to the bottom. Which will be a complete disabling of UAC.

Do not be scared, the system, as before, under the relentless control of your antivirus and firewall.

Deactivation in the Registry Editor

A sufficiently serious operation, so be careful while following the recommendations below:

• You need to use the familiar combination of keys Win + Q.
• In the search box, register the regedit command.
• Then activate the lower-level Apps tab.
• Login to the Registry Editor as administrator (hold the right button) to make changes.
• We go to the branch and follow the path: HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ System.
• In the System folder, you must select the EnableUA line.
• Double-clicking on the item opens a window in which you want to change the value 1 to 0.
• Reboot.

"The figure of aerobatics" is completed.

Unacceptable action: complete neutralization of the UAC service

The most effective way, but, realizing this method, you yourself cut a hole in the protection of unauthorized access. The photo in this description shows which items need to be changed, but again - this is an extremely undesirable procedure.

The most acceptable and painless method

Download and install the ElevatedShortcut utility. A free opportunity to divert all suspicions from using a trusted program. And the full value of the UAC remains unchanged.

• Launch the application.
• Change the language through Setting in the lower left part of the working window of the program.
• In the first checkbox specify the directory in which the executable file (* exe) of the favorable software is located.
• In the 3rd paragraph, enter the location of the high-priority label.
• Then "OK".

Now nothing can stop the work of this program!

How to disable UAC - command method # 1 in Windows 7

Often in the "seven" does not work the standard option of deactivation:

• Start Menu. Click on the account's avatar.
• Window "Account management settings ... user records", last item "Change ... accounts."
• Slider down. Reboot.

Using the command line

This method will allow you to turn off UAC without too much effort:

• Open the start menu, enter cmd in the search box. Launch the application.
• Copy the following command to the window.
• C: \ Windows \ System32 \ cmd.exe / k C: \ Windows \ System32 \ reg.exe ADD HKLM \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Policies \ System / v EnableLUA
  / T REG_DWORD / d 0 / f
• Reboot.

Through the Registry Editor

Almost the same way, which is described in the section on Windows 8, also allows you to shutdown by using the same scenario, but already in the "seven". The only difference is that you enter the registry editor, because the regedit command will have to be written from the Start menu.

Widows Vista: Disabling UAC

In this system, the "User Account Control" service is deactivated much more easily than in subsequent versions of the operating systems of the Microsoft family. But it was with this OS that the "obliging controller" began its existence.

• To disable UAC Vista, you need to go to the Start menu.
• Then click on the "Control Panel" tab.
• Find the "Accounts ...".
• We remove the check mark "Use control ...".
• We agree with the changes made to the "Ok" settings.
• We reboot the computer.

In Vista, this action is much more serious can affect the performance of the system, since drivers are already often in conflict with the not completely updated OS. Such a shutdown can be the culprit for the "crash of Windows Vista" situation. So it is recommended that you still refrain from deactivating the control service. Only in emergency situations, you can resort to shutting down: installing a program or application. Then turn it back on.

Finally

In a friendly Win 7 UAC, you can disable in several ways. In the framework of this article, you met one of them. After considering the basic methods of deactivating the change control service in the registry using the example of the main frequently used systems, you only have to apply the knowledge gained in practice. I wish you success in mastering the computer and accompanying the process of its operation - the installed operating system, which, we hope, will not be UAC-in the near future. Happily!