How to clean the RAM.

According to statistics, almost 90% of the number of all computer users, as the main operating system prefer the windows environment. However, it should be noted that the developers did not take much care to ensure that their system is as economical as possible and at the same time efficiently uses memory. It happens that the computer for a long time "hangs" due to the fact that it is not possible to load this or that process, or simply its memory is full. How can I clean RAM on your computer? In fact, in order to do this, it's enough just to wait until the computer "hangs" and wait a little, about 3-5 minutes. The operating system has its own service for cleaning the RAM. Another question is that it does not always work effectively. Alas, at the moment, the only 100% way to completely clean the RAM is to restart the computer. For your information: RAM is called operational, because its use is limited by the time when the PC is turned on. After disconnecting or rebooting, the entire cache is immediately cleaned and the computer is ready again.

One of the most common ways to clean your RAM is to use programs for this. For example, there is a program CCleaner or Ram sever pro. They will help you with this. Also a good way to clear the RAM can be the following method: enter the registry using the command RegEdit, and in it select those programs that should be stopped or not run at all, in addition, you can audit the programs that are in the startup. But remember: optimizing RAM in this way requires a lot of skills, you should not resort to it if you are not sure about your capabilities. Well, the last option is how to clean up the RAM of your PC, which we will consider - this is the so-called disk cleaning. Enter the control panel, select the "service" tab and there click on the disk cleanup. The system itself will check the files and prompt you to get rid of unnecessary or unused programs and applications. This will also improve the performance of your computer.

Let there are not so many effective methods of cleaning, but how to optimize the memory, I'll tell you. The best option is to disable or stop services and applications of the system that are not needed by an ordinary user. As you know, the operating system loads and uses about forty or more processes. Not all of them are critical and can not be stopped. You can temporarily disable an unnecessary service to you, or simply suspend it for a certain time. To do this, you need to go to the control panel, select the tab with the operating system, and when you have a fairly large list with services and processes, select those that you can disable. The same ones that are necessary for the correct operation of the system, you can not disconnect. From personal experience, I can say that you can bring windows xp to work in about 18 - 20 processes, and then the RAM will be spent at a minimum. How to optimize RAM using BIOS? It is necessary to set memory timings in the optimal way and, for example, slightly increase its frequency. But do not overdo it. If you increase the memory frequency too much or lower the timings too much, the computer simply will not turn on and you will have to reset the BIOS settings.

I will add the following advice. When buying memory slats it is desirable that they be one firm and strongly recommend that the volume of two or more slats be the same. Also make sure that the timings (you can see them on the packaging) are also the same. If you follow these simple tips for questions, "how do I clean the RAM?" You will have less.