HDD Regenerator: overview, features, instruction

Well, who from the users of modern PCs or laptops did not encounter a problem when the computer or the same laptop hangs. Little of! The problem is often that the Winchester started to "pour down". Change it? Costs, and considerable. But the utility HDD Regenerator, if not all 100, then 99% can restore the hard drive. Let's see what it is.

What is the purpose of the program HDD Regenerator?

Initially, as some users suggest, the application is created solely in the likeness of a "native" Windows utility for standard hard disk checking, because it is in most cases not only the cause of system failures, but also a device that can not store information for a long time.

The program HDD Regenerator Windows (in the sense - itself "operating system") initializes as best as possible. Here it is not even in the system, but in the minimum. The fact is that the simplest version of HDD Regenerator in Russian "weighs" only 8.8 MB. And this is subject to her opportunities!

Principle of operation

But let's see what this utility is capable of, since many experts call it almost the greatest discovery in the field of computer technology in the last half-century.

It used to be that if they interfere with the operation of the hard drive, they are likely to have to go to the dump. The HDD Regenerator application (Russian version is a dream of many) can not just fix bugs, but it is also said to restore bad sectors of the hard drive at the physical level. Do you believe in fairy tales? Let's see where is the truth, and where is the lie.

The program composes the sent signals of the high-power and low-power reading laser with short pulses, which, interacting at such a level, create a magnetic field. Thanks to sharpened "shots" on each damaged cluster or partition of the disk (namely, the hard disk), the so-called magnetization reversal effect is achieved. It should be noted that the data of any cluster remains intact, which completely excludes information interference.

As it happens, still remains a mystery for many users, moreover, even experts are wondering how it was possible to come up with this technology. With all this, many people say that the program itself has a fairly powerful resource, although it works in a non-standard mode (which, by the way, is very much embarrassing for many).

Installing the HDD Regenerator: Russian full release

Let's start with the installation. It is best to download the paid version of the program from the official site (hddregenerator.net). But! Most often in RuNet there is an unofficial copy, in which there can be three files: the installation setup itself, an additional descriptive file with the extension .txt or .nfo, as well as a special executable patch. Here it is something that antiviruses often recognize as something unsuitable, even if all three objects are, for example, in a RAR-archive.

It turns out that our user needs to install the English version, and then, as it's called, just patch it. Note that this procedure is by and large illegal, since the paid version of the HDD Regenerator Rus package is quite expensive, but unfortunately, this only applies to the installer.

Whatever anyone claims, there are no programs with the Russian interface, since it works in command line mode via something similar to DOS.

Overview of Operations

After the installation and launch of the program, the main window opens, in which we are first interested in two main sections: scanning the disk and creating a bootable USB. If the system still responds, use the first option.

HDD Regenerator allows you to perform several types of actions, not counting information viewing. The first is a normal scan. The second - scanning and correction, the third and fourth - the display of reports and statistics.

Scanning and recovery

If you start with the simplest, after running the utility, you can simply press the number "1", which must be entered in the square brackets in the "dosovsky" window. Note that this is similar to DOS, and control can only be done using the keyboard (the mouse in this situation turns off at all).

Now let's look at the questions related to the automatic recovery. To do this, select the number "2" in the main window of the running utility. This is where the biggest difficulties begin. Depending on the volume of the disk and the extent of its damage, not that the correction, the scanning process itself can drag on for hours. Therefore, before starting the utility, it is recommended to start using standard Windows tools in the form of a command line, where the command sfc / scannow is prescribed.

Boot from USB storage

But if you consider the possibility of the first launch of the application, you can choose to create a bootable flash drive from the start menu. The program will detect the existing USB drive, and then copy it to its own boot files.

Please note: the flash drive must have a capacity of at least 1 GB, and in the BIOS after copying the data should be set priority of loading First Boot Device: USB. But only not all users know that when you restart the flash drive, you must first insert it into the port, and only then turn on the computer or laptop.

Otherwise, the device will not be defined even if the download is enabled in the BIOS. In this case, when restarting, it will not start Windows, but our program.

On what it is necessary to pay attention separately

Now a few words about what not to do. Of course, the program itself HDD Regenerator in the active state shows the user some additional operations in the sense of their activation by pressing certain keys. The saddest thing is that many users, seeing that the process takes too much time, follow the recommendations of the utility and press the pause (Pause / Break) button on the keyboard.

Doing this is not recommended categorically, otherwise even the developer does not guarantee that the process of scanning or recovery will end successfully (and will it end at all). Do not also pay attention to some "hangs" of the application in the process of work. This is normal.

In addition, sometimes in the process of scanning a hard disk (note, not a disk logical partition), the monitor screen can generally be extinguished for a few minutes without any reaction. This is also a normal phenomenon. The process, if not violated, will recover itself.

Instead of the total

As you can see, the program itself HDD Regenerator in terms of installation or use anything complex is not. But many experts recommend that it be used only in the most extreme case. In addition, you need to look at the statistics of the check separately. If the number of expectations (delays) requests to access clusters of the hard drive is expressed by too large a two- or three-digit number, the hard disk will have to be changed. At this point, no remagnetization will help.

On the other hand, some hard disk makers recommend using the HDD Regenerator application (an extended paid version) paired with a unique utility for checking the mentioned devices and correcting errors on them called Victoria, as it turns out, from a Belarusian developer who literally blew up the world with his program.

In general, you should approach the issue of hard disk regeneration very seriously, otherwise problems can arise quite a lot, especially if you run the software in a safe boot mode without first creating a bootable flash drive. But in general, there should not be problems. And there are no serious consequences or threats for the drive itself or the installed system, all these processes do not carry.