How to make a septic tank from the European cups with your own hands?

People who have recently moved out of town, there are many problems with the arrangement in a new place. And one of the most urgent is the question of the construction of sewerage, since the comfort of modern housing depends largely on it.

An elegant solution is a septic tank from Eurocubes (with your own hands), for installation and further maintenance of which you will spend quite a bit of time.

How to determine the volume?

Most often beginners "stumble" on the fact that they do not know the simplest rules for calculating the volume of a septic tank. In fact, it's not so difficult. Experts say that its capacity should be three times the capacity of all the drains that the family produces per day.

So, a septic tank from eurocubes (it's very easy to make it by oneself) for a family of three should have a capacity of at least seven cubic meters. Since such a volume is sufficiently large, it is better to divide it into two parts. It is undesirable to break up septic tanks into more compartments, as it will not add efficiency, but problems with clogging of the transitional knees will eventually get you completely.

We begin to dig the excavation

Taking into account that the capacity we use is absolutely hermetic, we can dig a foundation pit for it anywhere where the sewage technics will pass. The method of digging depends only on you: if the size of the eurocube is small in your case, you can use the grandfather's shovel, in other cases it is better to hire construction equipment.

After the pit is excavated, it is necessary to pour a pillow of rubble on its bottom, trying to maximize the leveling of the surface. It is advisable to use a tamping machine for this or do it yourself.

If the soils in your area are difficult to call stable, you need to protect the septic tank from the eurocubes. With your hands for this you can make a reliable concrete screed at the bottom of the excavated pit.

Pipes

After the completion of all procedures with the installation of the tank and installation of its base, it is possible to start connecting the pipelines. For this purpose, it is necessary in advance to cut holes in the walls of an appropriate diameter. Important! In order not to remain without a runoff in the middle of winter, you must carefully seal all joints with a sealant, and dig trenches for pipes below the freezing level of the soil.

If you can not dig so deeply, we recommend using a special heating cable. With it, your septic tank from European cubes can be turned into an object that is beyond any cold.

Remarks

If you install a system of two septic tanks, remember that the second container should be located below the upper edge of the first by 20-30 cm. This self-made septic tank from European cubes will have to be equipped with a drainage pipe system. They are welded at a distance of about 20 cm above the bottom of the cube. The discharge is discharged into a drainage ditch, which must be filled with gravel or with the largest river sand.

It should also be borne in mind that a huge volume of methane and other gases is formed inside such sedimentation tanks. In order to avoid any unpleasant events, vent pipes should be provided for their removal . Of course, they should be located away from the entrance to the house or bath, otherwise pleasant evenings can be seriously overshadowed.

Here's how to make a septic tank from the eurocube quickly and at no extra cost!