Floor hanger for clothes with their own hands: materials, job description

A floor clothes hanger with your own hands can be easily executed. It is often used not only in residential apartments and houses, but also in offices. Of course, such a thing can be purchased in the store of the corresponding goods, but often the cost of the hanger is high and not all models fit in color and size. This subject is an excellent solution for the hallway, which does not have enough free space. Similar designs, which can be purchased in the store, most often have two sides for free access (out of four). Such shortcomings are devoid of a coat hanger for clothes, it is easy to acquire and strengthen it. Often, when it is made use available hooks, which are located as close as possible, this subsequently makes it difficult to access the rest of the parties. Eventually, the floor hanger is loaded on one side, which quite often causes it to fall. This is due to the fact that the structure has too high a center of gravity. You might have noticed that not all hangers have hooks for hats and bags. That's why you can come up with your own design, taking into account all the disadvantages of factory products.

Preparation of materials and tools

A floor hanger for clothes can be made by any novice craftsman. However, initially it is necessary to prepare a set of tools and materials, among them: self-tapping screws, sandpaper, chipboard, rotary mechanism, confirmats, jigsaw, and also the edge.

Design features

So, your choice is a floor hanger for clothes. With your own hands, making it, you can save, because the models presented in stores are quite expensive. However, before the manufacture begins, you need to develop a design design, while you should take into account the problems that have been described above. This will allow you to get a hanger that will differ in functionality and convenience during operation. The base of the product will be hollow parallelepipeds, which must be installed on the basis of the rotary type. It has two planes. The swivel mechanism must be located between the support bases, which are located from the bottom. You can buy accessories in a specialized store. The mechanism must have bearings that will provide rotation under load, the weight of which reaches 110 kilograms. The support base in the upper plane can be rounded, using a jig saw.

Preparing the Parts

If you will be making floor clothes hangers with your own hands, you will need to initially prepare the parts. The construction is assembled using chipboard, the thickness of the material should be 16 millimeters. The color is selected depending on the interior features and other pieces of furniture that are in the hallway. Preparing the details, it is important to observe the right angles, so experts advise ordering the cutting of elements from professionals, but the gluing of the edge can be made independently.

Edging

Before you make a clothes hanger, you need to find out how the gluing is done. It has an adhesive base and can be melamine. Its thickness is 0.5 mm or less. The edge is applied to the end of the element, the glue base must be turned downwards. Then - ironed iron, which should not be heated. Until the edge has cooled, it is smoothed with a dry rag. At the next stage, the ribs are processed, the excess edges need to be removed using an abrasive and sharp knife.

Dimensions of blanks

In order for you to get a coat hanger for clothes, you must prepare the bottom base of the square shape with a side of 560 millimeters. The top base should have a side equivalent to 380 millimeters. The side elements of the lower part are made in an amount of 2 pieces, the dimensions of each should be 600x300 mm. All other parts are made in an amount of 2 pieces, this applies to the inner side elements that make up the bottom part. The dimensions of each given blank must be equal to 600x267 millimeters. The upper and lower parts will have a square shape with a side of 267 mm. Similar parts are made with a side of a square of 167 millimeters.

The side elements must have dimensions equal to 1200x200 millimeters. The lateral inner parts of the top have dimensions that are 1200x167 millimeters.

Assembling

A metal clothes hanger can be purchased from you in the store - this is easier than making it yourself. But if you decided to fabricate a self-made floor structure of wood, then for the assembly you need to use confirmats with dimensions of 50x70 mm. For them, pre-prepared holes located at the ends. To do this, use a 5 mm drill bit. The depth of the holes should be 60 millimeters. The holes in the plane must have a depth equivalent to 8 millimeters. Make them need to be through. Do not be afraid that the heads of the fasteners will be visible - then they can be hidden using stubs. You can also make a clothes hanger wall-mounted with your own hands. For this, it is necessary to prepare a bar of chipboard, several hooks and fasteners. All these components are connected together, and after the construction is hung on the wall. In the case of the floor structure, everything is different. The hanger will rotate due to the presence of a swivel mechanism, it is fixed with self-tapping screws 4x16 millimeters.

Work Tips

The swivel mechanism has an all-in-one design, and its attachment to the base is made by creating technological holes with a depth of 10 millimeters. Initially, we have to make the markup. After the hanger is assembled, the fastener will be hidden by the upper plane. The hanger can be supplied with different hooks. Thus, the upper ones may turn out to be longer, which will allow them to be used for hats. The averages are meant for children's clothing, but as for the lower ones, they will be able to arrange bags. The construction is stable due to the fact that the center of gravity moves closer to the floor surface.

Alternative option

Clothes hanger wall in the hallway can also be done by you. To do this, you need to prepare a board, a bar, and also hooks. The board should have the following sections: 25x150, 50x100, and also 25x80 mm. As for the beam, it should have a square section with a side of 100 millimeters. As a base, the bar will be made, which is marked with the required length and cut off. If the hanger is not wall-mounted, but floor-standing, then it should be attached to the legs. The design must be treated with sandpaper. If legs are provided, they should have a length that is 350 millimeters. The legs on one side are cut at an angle of 45 degrees, which adds aesthetics. On their edges there should be supports that are fixed. These additional blanks are cut from the board, the cross section of which is 25x80 mm.

Strengthen the legs can be elements with a length of 330 millimeters. These blanks are made from a board of 50x100 millimeters. There should be four. When a wall hanger is built into the hallway, the upper part can be made more elegant by decorating the decor, which is made from a 5-cm board. The sawn timber goes to the cutting of a square, which is screwed to the top of the base with two screws. The workpiece is strengthened with the help of hardware, but if the decorative element you want to make yourself, then it should be deprived of fasteners for screwing. The workpiece in this case is glued with the help of a joinery.

Final work

When making clothes hangers in a closet, it is important to provide quality fasteners. It is often enough to use not only a mechanical, but also an adhesive method. In the latter case, both surfaces should be greased with joinery glue. After this, the construction is left until the composition dries completely and only then it can be treated with varnish or stain. The mixture is applied in several layers, between each of which it is necessary to leave the product until completely dry. After the surface is treated with sandpaper. Before proceeding with the application of the next layer, the surface should be wiped with a damp rag. In the process of manufacturing the clothes hanger, the above-mentioned technology can be used in the cabinet. However, whatever construction you choose, if it is based on wood, all corners are subject to cleaning, the same applies to the ends of the structure. This can be done between layers, then the surface will have the effect of antiquity.