How to make a clothes hanger with your own hands

Clothes hanger with their own hands can be made without the help of professionals. To do this, it will be sufficient to prepare all the necessary materials and tools, as well as familiarize yourself with the technology of the work.

Preparatory stage

As a material that will form the basis of the design, planed pine planks will perform. You need to choose those that have a thickness of 25 millimeters. In order to supplement the shelves of this product, which will be strengthened on the wall, you should use a furniture glued board, the width of which is 300 millimeters.

Auxiliary tools and materials

If a clothes hanger is to be manufactured by hand, it will be necessary to prepare wood screws, PVC glue, acrylic moisture resistant wood varnish, and an electric drill. You need an electric jigsaw, a wood hacksaw, a tape measure, a ruler and a square. Hangers for clothes made of wood are made using abrasive skin, hammer, screwdriver, circular hand saw, as well as stain. The latter is necessary in the event that there is a need for a change in the color of the structure. In order to make the product more aesthetic, you need to stock up on wooden furniture boards, and as fasteners will perform furniture dowels, the dimensions of which are equal to 10x30 millimeters.

Assembling

If you will make a clothes hanger yourself, then after all the tools and materials have been prepared, you can proceed with manipulation. All parts should be well treated with abrasive paper, especially with sharp edges and corners. The first should be rounded. Billets should be rid of chips and burrs, as well as other irregularities that strike the eye. In the process of work will need to observe a certain technology, which involves several stages. When a clothes hanger is manufactured with their own hands, then initially two boards must be laid on the table, which will be oriented vertically during operation. After them, you need to place cross-pieces in the number of 3 pieces. Once the right angles have been verified, you need to screw in the screws, installing them from the back of the cross planks. This will bring all the details together.

When making the clothes hanger in the hallway, the screws must be dumped in such a way that the heads are flush with the surface of the transverse parts. The sharp ends of the screws should not go out through the vertical boards. The next step is to fix the rest of the vertically arranged boards, providing an even gap between them. The width should be equal to 80 millimeters. It is important to check and, if necessary, adjust straight angles. Now, under the crate, you need to have a hook holder, and after that, cut two fasteners into each vertically placed board. When making the clothes hanger in the hallway at this stage, the screws must be installed on the back of the cross pieces. This will give the structure additional rigidity.

Conducting the assembly of the shelf

After the master managed to carry out all the above-described work, it is necessary to make a docking of the shelf with two sidewalls, which serve as brackets. You need to make sidewalls in advance. Clothes hangers wooden are obtained most quickly, if in the process of using electric jig saw. With its help, on a previously outlined contour, it is necessary to cut the workpieces, treating them with an abrasive skin. To install the dowels, drill holes in all workpieces. Four dowels are installed in the shelf, they must first be glued with PVA glue. Sidewalls connect to the shelves by means of dowels, which are inserted into the prepared holes. On each sidewall you need to cut two fasteners.

The procedure for assembling the structure of the hanger

If you will make a clothes hanger, photo of which you can see in the article, then at the next stage it is possible to assemble the whole structure. In view of the fact that the load from the items on the shelf will affect the sidewalls, they must be fixed to the vertical edge boards of the sling system as safely as possible. To do this, with self-tapping screws, you should additionally use furniture dowels. At the previous stage holes were drilled in the ends of the sidewalls. They need to be treated with glue, driving dowels into their seats. When you will be made a clothes hanger, photo of which will help you to decide on the design features, you will need to make the holes corresponding to the previous ones in the outermost vertically placed boards. It is important to ensure the correct joining of the pre-assembled shelf. It is necessary to fix this element of the crate by screws. Self-tapping screws are installed in the rear of the vertical elements - two pieces for each sidewall. After the shelf is fixed to the top edge of the element on which the hooks are mounted. Even one self-tapping screw can be used.

Conclusion

The hanger drawing, presented in the article, will allow you to prepare the elements for the assembly of the structure. Depending on the area of the room, you can adjust the dimensions, taking into account your own preferences and exterior features. It is important that the subject be combined with the situation.