To date, many people are interested in how to make smoke from paper. It should be immediately said that this process is simple, but dangerous. Therefore, if it is possible to do without the presented object, then it is better to refrain from its construction. If you dare to try, then be extremely careful and follow the instructions exactly.
Before you make the smoke from the paper, you need to prepare all the necessary material. For work you will need old newspapers, saltpeter, a plastic bottle (for fertilizer), and a housing for the product (you can use a tin can from the energy drink). Now we start to make a solution for impregnating paper. To do this, in one liter of water, dissolve 300 g of saltpeter. For the substance to dissolve well, the container should be shaken thoroughly. The amount of solution depends on the number of pieces.
If foam appears on the surface of the liquid, then it must be removed. Now you can screw the sprinkler to the bottle and start the procedure for impregnating the sheets. If you know how to make smoke from paper, do not forget to follow safety rules. Sprinkle newspapers better on the street. In this case, the surface on which the sheets will be laid should be smooth and clean. The next piece of paper should be stacked on the already processed.
Before you make the smoke from the paper, stock up on gloves, a respirator and protective goggles. Since the solution can drain off the edges of the paper, the previous one needs to get slightly wet before laying the next sheet. After all the newspapers are packed in a pile and moistened with saltpetre, they should be turned over and allowed to soak them properly. The next stage will be drying the sheets. To do this, you can simply hang them on wooden bars. However, one should take into account an important circumstance: in no case can this procedure be carried out in the open sun.
Next, you will learn, in fact, how to make smoke from a newspaper. This work will not take much time. First, all the sheets should be bent several times in the middle. Then each element must be very tightly twisted to the middle. At this stage, the elements will be embedded one into the other, and you need to make sure that they are pressed as tightly as possible.
After you shove the last twisted sheet inside, you can wrap the product with scotch tape. That paper, which will look from the ends, it is necessary to tuck in well. In principle, after that the product is ready for use, you just need to insert a small fuse for ignition. If you want a paper dymovuka to look beautiful, you can insert it into a tin can. To do this, the top of the body must be cut off. Please note that the newspaper package must fit snugly against the sides of the can. If there is a gap between them, the smoke should be further sealed with paper.
While working, be as careful as possible, since saltpeter can have a bad effect on your health. When using the checkers, you should be twice as careful and careful. Do not work without protective clothing!