HomelinessBath or shower

Dismantling the bath: a description of the process. Removal of bathtubs

Plumbing often involves operations for the repair and replacement of local equipment. The simplest cosmetic activities affect mixers, fittings, connecting elements and other small-format accessories. As part of the overhaul, it may also be necessary to update the basic large-scale equipment. The most difficult procedure in this part is the dismantling of the bath, since it is conditioned by the preparation for work with a large load, and the need for a competent disconnection from the communication drives.

Preparatory work

At this stage, the main objective is to remove obstacles that may prevent the main part of the dismantling work. Begin preparation should be with the removal of furniture and accessories from the room. This can be hygienic supplies, shelves, cleaning equipment and less expensive equipment, which is also planned to be replaced. If possible, at the same stage should be disconnected engineering piping. If the plumbing channels connect the bath and the toilet, you can not do without uninstalling the latter. It is important to remember that replacing the bath will involve risks of damaging the facing materials. Therefore, it is worthwhile to think over protective coatings for tiles or other decorative surfaces that are in close proximity to the working area. Also it is necessary to prepare a doorway for the subsequent removal of the bath. Sometimes this requires the dismantling of the box with the cloth.

Sequence of dismantling

The whole process can be divided into two stages: the direct disconnection of the bath from the plumbing leaks and the physical removal of the structure. The first part involves disconnecting the channels that provide protection from overflow, as well as a siphon. Initially, access to these areas should be provided to facilitate work operations. The easiest way to disconnect is with modern plastic pipes - just use the key of the appropriate size and unscrew the fastening fixture. Problems can arise when dismantling the old metal eyeliner. If the usual disconnection scheme does not work due to dilapidated communications, then it is quite possible to resort to cutting the pipe - in the future it will still be advisable to switch to the same polyvinyl chloride pipes instead of metal. Further, the physical dismantling of the bath is performed, for which several people will be required to take part. The weight of the structure can reach 100-150 kg, so without outside help with this operation can not cope. Usually, baths are kept on concrete, brick or plastic stands, without requiring the removal of complex fasteners - the main obstacle will be the mating of the edges of the bath with the adjacent lining. The structure must be lifted gently and carried to the previously released or even enlarged doorway.

Nuances of work with legs

The old Soviet designs are distinguished by the presence of legs holding the bath. This solution is also found in some new models of baths, but in a more civilized form from the point of view of installation. Separate old modifications in this sense cause problems due to capital integration in the floor. That is, additional dismantling operations associated with the liquidation of this fasteners may be required. For such works, the Bulgarians are used. " Angle grinding tool cuts the lower part of the legs, if another way of dismantling is impossible. But it is best to remove the old bath by completely dismantling the floor holders embedded in the floor. For this, it may be necessary to work with the destruction of the basement under the bath in the form of a screed. This will release the legs, for example, if they were filled with concrete.

Dismantling of a steel bath by a destructive method

This is the least desirable, but in some cases the only possible way to dismantle the bath. It is used in cases where the whole structure does not pass through the doorway or if, in view of the inaccessibility to the lower fasteners, there is no possibility of uninstalling the same legs. In any case, communications must be disconnected by this time. Directly dismantling the bath is realized by the same Bulgarian with a nozzle for cutting metal. Cutting is carried out with a minimum of parts so that they can pass through the doorway. Depending on the model of the tool, the possibility of instant dust collection integrated into the construction by a vacuum cleaner can be provided. This will minimize the spread of fine metal dust during the cutting process.

Features of dismantling of cast-iron structures

Cast iron structures are often destroyed due to the fact that they have long lost their relevance and are not used again. And the destruction of small parts in the future simplifies the process of export. But unlike a steel bath, cast-iron analogs are quite amenable to the mechanical impact of the sledgehammer. The given metal though and durable, but fragile and at sufficient loading bursts. Use except for a sledgehammer it is possible and scrap. Destructive dismantling of the cast iron bath is done in protective gloves, mask and apron - this will eliminate the risk of injury from flying debris. Also, it is necessary to protect the sensitive to external influences of other sanitary equipment. The main thing is that the adjacent areas are not affected. It is possible to initially carefully disconnect the structure from the tiles at the junction points. However, strong fluctuations and in this case can damage the tile.

How is the bathing organized?

If disassembling by a destructive method can be performed independently with the skills of handling the above-described instrument, then it is desirable to entrust the export to specialized firms. Today there are many companies that quickly, safely and safely perform such activities. They also produce and dismantle the bath, using professional techniques, so you can count on a full cycle of work. With regard to export, the dismantled bath or its parts are packed in place in the insulating protective material, then removed from the apartment and further - to the location of the transport. Usually such work is performed by teams of 4-5 people.

Cost of demolition and removal services

Depending on the complexity of the dismantling activities can cost about 2-3 thousand rubles. The specific cost depends on the conditions of the operation, and on the characteristics of the structure. Requirements for preserving the appearance also determine how much the bath will cost to dismantle. The price for work with the guarantee of integrity is usually 500-100 rubles. More, that is, 2.5 thousand on average.

The prices for export are slightly different. Although such services also depend on the conditions of the event and the range of transportation, on average, they fit into the same 3 thousand. By the way, the export of baths is also carried out by representatives of metalworking enterprises. In this case, you can count on the free of service provided that the owner of the disassembled product is refused.


Even during the planning of dismantling work, it is important to calculate how the liberated space will be arranged. This, in particular, depends on the possibility of eliminating external communications and the adjacent cladding zone. If the replacement of the bath is complemented by a complete renovation of the room with engineering infrastructure, this will greatly facilitate the work. In this case, you do not have to isolate the decorative coatings and additionally protect the protruding drainage pipes. Experts recommend, especially in the case of removal of old baths, completely renew and sanitary plumbing.

Similar articles





Trending Now






Copyright © 2018 en.unansea.com. Theme powered by WordPress.