Applied Guide: how to stretch strings on a guitar

Many amateur musicians, in particular those who learn to play the guitar, sooner or later face the need to change the strings. This article is devoted to how to stretch the strings on the guitar, how to do it as correctly and safely as possible, because in such a case care and concentration are needed.

Kinds of strings

To understand how to properly install strings, you need to first understand what kinds of them exist. At the moment, the world knows two kinds of running strings: metal and synthetic. The first is more rigid, requiring a strong tension. It is recommended to install such strings on guitars with an anchor (reinforced construction).
Installation of metal strings on classical guitars can lead to damage to the musical instrument, but they play much more sonorous. Synthetic strings for classical guitar are light and very comfortable for beginners, for a long time retain their performance. On such strings, fingers hurt much less, there is no need to exert much effort to clamp the bar.

Installation of strings

The process of installing both nylon (synthetic) and metal strings will be considered on acoustic and classical guitar, in order to visually see how to stretch the strings on the guitar. First of all, you need to insert the string into a special hole and secure it securely. Further, the second end of the string must be inserted into the hole of the corresponding spike, but not too much, so that the string does not stick out. Previously, sticking strings were in vogue, but now there is nothing "cool" in this - just a torn cover. The rest of the string should be simply wound on a peg. After all the strings are installed and fixed, you need to gradually begin to pull one after another, thereby increasing their tension. To begin with, it is recommended to tighten all the strings so that they stop rattling, and then customize each individually. This will greatly speed up the process. Today, there are many ways to customize the guitar, for example, an online tuner or an ordinary tuner, tuning fork and so on. Another weighty advice: before you start pulling strings, you can pull them out. This is done manually from the top attachment to the stand. The installation of metal strings is slightly different. For example, from the bottom, they do not need to be fixed by various nodes, because of the presence on the metal strings of special balls (latches), performing the function of fastening. Metal strings need to be pulled a little stronger, and after several hours it is necessary to repeat the procedure.

Helpful Tips

Here are a few more tips on how to stretch the strings on a guitar. Stretch them with the utmost care! The total tension force is about 50 kg, which is quite dangerous for health. In this regard, the procedure must be carried out slowly, carefully and securely fixing each string (thin have a great chance to tear or fly off the mount). Both nylon and metal can be wiped with special means to keep their performance longer.

How to determine the price

If you touch on the question of how much the strings cost for the guitar, then we can say that it all depends on their quality and the manufacturer. For example, the cheapest metal strings cost about 90-100 rubles, nylon even less. The price of high-quality metal strings is about 500-800 rubles.

Answering the question on how to stretch the strings on the guitar, it is impossible to say with certainty that after reading this article, a person with an absolute guarantee will be able to perform the installation without problems. Everything is learned in practice, everything comes with experience. Knowing the information, it is important to be able to use it. Use and you!