Sealing gums for the refrigerator: features of choice and replacement

To begin with, you need to figure out why the sealing gums for the refrigerator are needed. The most basic function of this element is to ensure the integrity of the unit's chamber. Naturally, the elastic band should be as high as possible, otherwise, except for an excess build-up of snow, you can get a breakdown of this household equipment. To date, such a seal can be of different types. In any case, it will be single- or double-columned.

Sealing gums for the refrigerator should be firmly held on the door of the device. The easiest way to attach is the "Christmas tree", which provides for the insertion of the element into a special groove, from which it can be quickly reached while washing the refrigerator. However, there is no need to use additional funds on an adhesive basis.

Sealing gums for the refrigerator can be screwed to the base with self-tapping screws. However, this method is very risky, since it can damage the door. At the same time, you can lose the tightness that you are trying to achieve. The production process also uses an adhesive method of securing the seals. Its only drawback is that when you replace it, it will be difficult enough to dismantle it.

It should be noted that the sealing gums for the refrigerator should be chosen in accordance with the model of the device. Otherwise, the element simply does not become in place, quickly deformed and cracked. Correctly fixed seal will last much longer. However, if it still deteriorated, then you need to install a new element.

Replacement of the sealing rubber on the refrigerator implies a certain sequence of work. To begin with, it is necessary to remove the door from the hinges and put it, since in the vertical position it is extremely difficult to do all the procedures. The old elastic should be carefully separated from the base. To do this, you may have to slightly cut it. When removing the old seal, try to work as carefully as possible so as not to damage the groove on which it is fixed. In work, you can use a small spatula.

The place where the sealing rubber was installed for the refrigerator door should be well cleaned of the finisher. Then, using a solid stud, a new element must be fixed. If you still could not find a suitable sealer, you can use one that is, but you have to cut it exactly according to the size of the door, and fix the joints with glue. And the substance should not be afraid of negative temperature.

If all the steps were carried out exactly with the instruction and qualitatively, then the work will take no more than 1 hour, and your refrigerator will work as a new one. However, if you are afraid of doing this yourself, you can call a specialist at home. That's all the features of replacing the old seal. Good luck!