Aluminum composite panels: overview, description, manufacturers and installation features

Aluminum composite panels, the price of which will be written below, are used primarily for finishing buildings, houses and structures from the outside, using a special technology ventilated facade. Such material can also act as an element of washable and wear-resistant finishing for various public places, for example, medical facilities, airports, restaurants and cafes, railway stations, bus stations. And thanks to their simple installation, they are often used to build advertising structures.

Manufacturing

Composite panels are manufactured by bending aluminum sheets, with the radius of curvature being as small as possible. The latter, while observing all the necessary regulatory standards, is absolutely analogous to the thickness of the plate. At right angles to the main surface, special bendings are bent along the entire perimeter of the panel. These bends are then placed in a special mounting profile, attached to the wall surface and very firmly snapping.

Classification of mounting profiles

All modern mounting profiles are divided today into 3 main varieties:

• Joint with seal;
• Open docking of panels;
• With the use of a moisture-proof screen.

In order for the facade to acquire increased rigidity, very often additional elements are used. For example, in the role of supports you can use wooden beams or flat shields.

Benefits

The main advantages of finishing surfaces from aluminum composite panels - a large range of different colors and a long service life of the front side of the material with a painted coating. Another positive quality of such products is the ease of the various processes of their processing, in particular, milling. It allows you to create technical holes on the surface of products. The density of the aluminum panel is approximately 6 kilograms per square meter.

disadvantages

It should be noted that this material does not apply to thermal insulation, because it is made for the most efficient heat transfer. It allows to equalize the temperature of the inner and outer aluminum sheets, otherwise serious deformation can occur when the material is heated under the influence of the sun.

In order to avoid the so-called cold bridges, the installation of aluminum composite panels must be done so that special paronit thermo-disconnecting gaskets are laid between the surface of the supporting wall and the brackets of the mounting guide elements.

Scope of application

Most often, this product is used to create the exterior of certain buildings. The most popular were ventilated facades. However, not only this is the field of application of this material. Aluminum composite panels are also used in interior decoration, for example, in public establishments. As a rule, schools, stations, theaters, salons, shops, centers are such. That is, it is a room where a lot of people are constantly going. After all, it is in such buildings that you should install resistant materials, which are not afraid of mechanical damage. They will not only be a powerful support, but will also become a good decorative finish.

Also very often aluminum composite panels are used in places of temporary exhibitions or on billboards. They are ideal for the restoration of old houses, especially those whose walls can not be restored. Thanks to these panels there will be complete sound insulation, and the appearance will be at times more attractive.

Errors during installation

In order for the panels to serve for a long time and do not quickly deform, follow the rules when installing. When the sheets are delivered, you need to inspect them for scratches or defects.

In order to avoid damaging the aluminum composite panels during storage, it is necessary to install cardboard or any other material of similar texture between them. Ideally, if the sheets are to be transported using a crane, it is best to use special clamps that will give a high safety guarantee to the product.

When installing the main thing - remember about some properties of the panels. For example, with an increase in temperature, their dimensions slightly increase. This suggests that when laying it is necessary to leave very small gaps between them. Luft is welcome.

To remove a protective film too follows without errors. Aluminum composite panels, the price of which starts from 1 thousand rubles per 1 square. M, it is easy to warp as a result of incorrect movements. It should be removed at an angle of 180 °. And only after 2 weeks, and it is better and at all in a month from the moment of their manufacture. It is in this case that the glue will leave completely, and not remain on the surface.

Goldstar

Aluminum composite panels, whose manufacturers sometimes use the wrong technology and do not apply a protective layer, it is better to buy the Goldstar trademark. Maybe some are frightened by the fact that they are made in China, but in fact, if you buy authentic models, then the quality is really amazing. According to people, they are best suited for long-term operation and withstand mechanical stress. Branches of this company can be found in various countries, including America, Europe and Asia. It should be noted that the prices for aluminum composite panels Goldstar are not so great and differ little from the prices of competitors. What confirms the quality of these materials? And the fact that in New York some skyscrapers are built with the help of this particular product. This shows the invaluable quality of the panels and the honesty of the manufacturer, which is now so valued in the world market.

Manufacturers

Alcan Kapa GmbH is a German company that started its activity in the 60's. Its products belong to the category of quality products, which are in high demand. However, one must be prepared for the fact that there are a lot of counterfeits on the market, which are issued for a German product.

"Alufas" is a Ukrainian trademark, specializing in the production of composite panels. The plant is located in the city of Dnepropetrovsk, is equipped with high-quality equipment. During the manufacture of panels, the latest technology is used. That is why there are no analogues of this trademark in Ukraine.

Other manufacturers are also on the market, such as Reynobond, Etalbond (Europe), Alpolic (Japan), etc.

The result

Based on all the information, we can say that aluminum composite panels - an excellent material, which today is the leader in the construction sector. It is excellent for finishing any buildings, because the excellent appearance and good characteristics - its not a detachable plus. Thanks to this material, you can make your existence colorful and cozy. Moreover, the panels do not require the maximum care.