Which tile glue in the bathroom?

It happens that it is difficult to make a choice and to make the only correct decision, especially when it comes to a product that has a wide range. Adhesive for tiles in the bathroom can be safely attributed to this category. At the moment, its production is engaged in a huge number of companies, and he has many varieties, in which the properties and purpose are different. It is worthwhile to consider in detail how it can be and how to choose it correctly. You can describe and its main advantages.

Advantages of dry mixes

Dry glue for tiles, reviews of which you can read, easily fits on the walls of any curvature, as it copes well with the tasks of leveling, even without preliminary plastering. Polyurethane compounds can be used only on ideally flat surfaces. For example, for wall tiling with mosaic this option fits perfectly. It is even sometimes positioned as a means for mosaic tiles.

Dry glue for tiles in the bathroom at a cost much more affordable than all other types. If we compare the identical volume of finished and self-prepared substance, the difference in price will be immediately apparent.

If we carry out a comparative analysis of both types of compositions, then they cope with their duties simply perfectly. Polyurethane mixture holds a little better, it is able to hold the tile almost forever. Dry glue for tiles in the bathroom on the basis of cement is able to last more than half a century. In any case, the coating, glued by one or the other option, will simply get tired of this time. And this gives another advantage to dry mixes.

Dismantling dry glue is much easier, for this you can use a puncher, which will remove everything, though with difficulty. A polyurethane mixture requires removal with a part of the base, and if it, for example, gypsum board, then it needs to be re-sewn again.

The main varieties

Modern production is conducted in accordance with international classifications. The glue for tile laying in this case is no exception. In accordance with this classification, it can be divided into five enlarged groups: for floor covering, for the production of internal works, for increased fixation, universal, as well as moisture resistant, used for facing surfaces that are constantly exposed to water. Now with each kind can be understood separately.

For production of internal works

This type of adhesive is the cheapest, it is usually used for finishing walls in residential premises. They do not contain any special additives that can improve their properties, but they are able to glue tiles of standard sizes sufficiently qualitatively to strong brick and concrete bases. The most important condition for the use of such a composition is the absence of influence on it of temperature and humidity fluctuations.

Glue of increased fixation

Its main characteristic is a high degree of adhesion, as well as the ability to cope with high tensile stresses. This determines the scope of its application. It is actively used for cladding bases that are subject to temperature and dynamic influences. Most often it is used for laying natural stone and tiles in large format - it fits well with old surfaces that have already been painted or tiled. An important condition for such interaction is the following: it is necessary to make sure that the previous lining is well held.

Universal

This adhesive for tiles in the bathroom is the most common among the master tilers. This type of composition can be used both inside and outside the room. This type is designed in accordance with standard operating conditions, so you can not talk about its universality in the literal sense. It can not be used where heavy loads are expected, strong moisture impacts and temperature changes. It is not recommended to lay on it a tile, the size of which is more than 30 * 30 centimeters.

For floor tiles

In this case, a significant amount of plasticizer is added to the original composition for floor tiles . This is done so that during the laying of the solution all the existing voids are filled completely. Do not use this glue for tiles on the wall, as it will float on it. All other characteristics allow us to compare this variant with the universal one.

Moisture-repellent

If you need glue for tiles in the bathroom, then this type can be called the most suitable. It is designed for finishing fountains and pools. As a matter of fact, this glue for a tile strengthened, but in it the modifier adding it to hydrophobic properties is added. It is quite expensive, so many craftsmen prefer to use the usual instead of it in combination with a water-repellent trowelling mix for seams.

The subtleties of choice

Before carrying out repairs it is necessary to make the right choice of materials, as this affects the durability of their operation under certain conditions. Do not think that you can get rid of a universal mixture, as this will affect the life of the tile. For example, if you lay the tile in the bathroom on a universal adhesive, then instead of the prescribed 30 years it will serve you no more than 15. Of course, for dry rooms this option is simply indispensable, however, when it comes to operating at the maximum level, then there is no risk .

Criterias of choice

There are very few criteria when it comes to choosing a glue composition. We can distinguish only three global nuances that have a direct effect on the choice: the operating conditions, the structure of the base on which the tile is laid, and the size of the elements.

If we talk about the conditions of exploitation, then everything is simple. In the production of tiling in the kitchen, suitable for domestic work or a universal mixture. Even the lining of the floor can be carried out using the standard version. In the bathroom you can use a tile adhesive reinforced or a compound with special moisture-repellent properties. However, you can use the universal version, while its shortcomings will be compensated by special grouting for seams. The porch can be lined with a water repellent compound or a mixture of increased fixation.

An important parameter of choice is the base material, which is lined. Dry substances can be divided by their ability to adhere to certain materials. For example, mixtures made on the basis of cement should not be used for flooring, which is covered with OSB, special compositions have been created for these purposes.

Adhesive composition should be selected and depending on the area of the material. The more tiles in size, the more strong the substance must be fastened to the surfaces. However, there are certain reservations, one of which is as follows. The floor tile is quite normally kept on the adhesive of increased fixation and on the universal, of course, if it is laid correctly. And the walls are rarely faced with tiles of large sizes - for interior decoration the largest elements in the area have parameters of 30 * 60 centimeters. They will pretty well hold on to the standard line-up, if there is no emptiness below them.

Adhesive for tiles: characteristics

It should be said that there are several color differences between the compositions. Materials on the basis of cement have a gray color, which for everyone has already become familiar, or non-standard white. The second is usually used for laying a mosaic, which is quite difficult to clean the seams between the elements from the existing gray outgrowths. White color can be considered neutral, so it is easy to mask by trowelling of any shade. In general, not every composition is suitable for fixing the mosaic. The technology of its laying dictates the need for two-component latex glue.

conclusions

If we sum up all of the above, then we can not give an unambiguous answer about the choice. It all depends on a whole set of factors, according to which it is necessary to give preference to this or that variant. It will be necessary to study the adhesive itself for tiles, reviews about it, the properties of many adhesive compositions and other characteristics.