What is the sole of the iron good? What iron to choose?

Probably, each of us faced with such situation when the iron spoils an expensive thing to us. As a rule, such damage is not an isolated case. After that, irons often begin to "flounder" on a permanent basis and to use them becomes unbearable and even to the detriment of themselves. So, the situation eventually ends with a trip to the store, where we are faced with a huge choice of this element of home appliances, but we want to get, of course, the best and not for a fairy tale fee. Which sole of the iron is good among such a large choice which model to give preference, this article will tell.

What is most important?

If you ask a specialist, he will immediately say that the main thing in the iron is the sole. It is important that it is well heated, smooth, qualitatively cleaned of dirt, not scratched, glides well, and so on. But what sole of the iron is good, we will disassemble each separately.

What about aluminum?

The best heat conductivity among metals, of which the sole is made for iron, is aluminum. It heats up well and quickly and also quickly cool. In addition, you will be pleased with the price of an iron with an aluminum sole. There is, however, his own minus. Although the aluminum soles are amenable to grinding to a state where smooth sliding of the iron over the fabric does not interfere, it is subject to slight mechanical damage.

For example, if you iron your jeans, which necessarily contains many all kinds of rivets and metal buttons, then the covering of the iron will certainly be scratched. You will not notice this immediately, but after a year of intensive use, the entire sole will be scratched and, as a result, contaminated with microscopic particles of tissue that will stain the new clothes. You, of course, can iron things through any fabric, but it's not too convenient. This all applies to the cheaper models.

Maybe Teflon?

Non-stick coating, which is sprayed with inexpensive aluminum soles, has the property of inducing shine, especially if things are woolen. Teflon has some advantages that correct the shortcomings of plain aluminum. For example, nothing will ever stick to him. But nothing protects him from scratches, in time he will peel off.

Advantages of ceramics

All well-known manufacturer "Tefal" has developed a coating that differs from many others. This so-called glass-ceramic coating, executed in ribbed form, which allows the device to easily slide on the fabric. The developers also argue that an iron with a ceramic sole is able to cope with even the most difficult to smooth tissues.

Stainless steel soleplate

The stainless steel undoubtedly possesses increased characteristics in terms of strength and wear resistance. Therefore, choosing a practical model and deciding which soleplate iron is good, it is worth paying attention to this option. It is easy to clean, it is also good in sliding, which, as we have already understood, is important in choosing a decent iron. But stainless steel is not a panacea. An iron with a stainless steel sole will last you a long time, but it is heavier than its competitors and the process of heating and cooling takes much longer than that of the same aluminum. This will be noticeable if you are in a hurry and you need to iron your clothes urgently, and the iron does not "hurry" to heat up. It is also worth noting that this device will cost you more, because the cost of stainless steel is much higher than that of aluminum or ceramics.

Titanium iron

An iron with a sole covered with a titanium not only sounds powerful, but also expensive. But, of course, the iron, whose price is so high, quite justifies itself. Titanium, as we know, is one of the lightest and most durable metals. Such a coating of the soleplate of the iron is particularly strong. Another wonderful property of titanium sputtering is the simplicity of its cleaning. Even if you leave the iron on the fabric, which, according to all the laws of the genre, must be attached to it firmly, it can be easily cleaned. It's enough just to let it cool and wipe with a damp cloth. Only one disadvantage is the titanium coating of the soleplate of the iron - it has a low thermal conductivity. Even the thinnest layer of coating significantly reduces the temperature of heating the sole. When buying this is also worth considering.

Puff

Some manufacturers do not stop experimenting with aluminum and try to give it the missing strength, while preserving its outstanding thermal conductivity. They achieve this by layering one cover into another. For example, manufacturers such as Siemens and Bosch prefer to cover the aluminum soleplate with a thin layer of stainless steel. They were the first to cover the bases of stainless steel with heavy-duty enamel, which, in its properties and strength, resembles a qualitatively processed granite, from which this line of irons is called Granit glisse.

Manufacturers are so confident in such a combination that when answering the question about which sole of the iron is good and durable, openly declare that their supercoating is not scratched, recommending especially strong impurities to be scraped with an iron brush.

"Philips" and "Tefal" also offer consumers irons with a ceramic coating. However, they differ significantly from their competitors by the way of applying the ceramic layer and its processing. It is baked ceramics, a thin layer applied to the aluminum base of the sole. This sole has all the qualities necessary for a decent iron. It is well heated, and has sufficient strength, and does not give the fabric undesirable shine, also allowing to iron even the most capricious synthetics. This became possible because of the unusual material that developers use. This material is enamel, or as it is also called - Durilium.

Special attention worthy of special soles "Brown", and what is most pleasant - for such an iron the price is not very high. Despite the special manufacturing technique, they remain in the average value category. This can not leave indifferent buyer who wants to buy quality goods at the best price. The coating of these irons is called sapphire. This does not mean that the company uses sifted sapphires to produce high-quality soles of irons "Brown". Sapphire in this case is called the type of corundum. This mineral is still used as an abrasive. All because he has incredible strength, which only a diamond can argue with.

The low cost of this mineral is due to the fact that it is extracted artificially. And the name is only a marketing move. At the same time irons from the "Sapphire" series are in no way inferior to the highest quality of the above irons by any criteria and are really very good at using.