Waterproofing balcony

Most often, balconies are not originally planned as a premise, which should be operated as dry. However, nothing is impossible. There are a number of activities that make it possible not to suffer from the flood, and at the same time make the balcony an important part of the apartment as well, having carried out the redevelopment. In solving this problem, the most important point is the visor, which is performed over the window product. It can be installed on a balcony or loggia. The main penetration of water very often occurs precisely through the joint of the ceiling slab and the visor, it is here that the waterproofing of the balcony is needed. Usually, firms that install such a visor do not carry out waterproofing using special materials that exclude leaks.

Undoubtedly, the balcony is the decoration of any house. This place is considered very convenient for rest, as there is nothing more pleasant than sitting here in the warm evening with a cup of tea, and just this room can please the eye with its beautiful and exquisite decoration. However, with all this important quality waterproofing balcony. This is due not only to the aforementioned joint of the visor and balcony plate, but also to constant temperature changes, thaws and frosts, precipitation and other external factors. In connection with all this, we should pay special attention to this problem at the design stage.

Low-quality waterproofing of the balcony can lead to very unpleasant consequences. Various precipitations, as well as temperature differences, can cause wetting, which causes the destruction of the structure of the slab and the floor, as well as the formation of fungus and mold. Due to the damaged drainage system, the concrete structure may suffer, corrosion of the reinforcement may start, and as a result of all this, the balcony slab may collapse altogether. It turns out that the waterproofing of the balcony is designed to protect against all the listed negative factors, and in this case only high-quality waterproofing materials can help.

Usually open balconies carry the danger of wetting concrete slabs and their destruction. The main reasons for this may be the following: absence or poor-quality waterproofing of the floor, lack of drip and drainage, failure to comply with the installation technology, and lack of fencing around the perimeter of the balcony. Because of the reverse slope of the balcony slab, the concrete structure may begin to deteriorate, as in its microcracks moisture will stagnate or melt water will freeze.

If the waterproofing penetrating is not done in time, then there may very well be some unpleasant consequences. Water can flow to the balcony a floor below, because of what you will be forced to compensate the neighbors for damage. Due to the waterproofing of the floor, it is possible to exclude such leaks. In the course of the work, it is necessary to take into account all the nuances, for example, reverse slope of slabs and others. Such a slope can be eliminated by using a cement-sand screed, and on top of it already apply a waterproofing compound.

If the waterproofing of the balcony with one's own hands is carried out, the two-component polyurethane coating mixture can serve as the main material that will be used for this. In addition, it is appropriate to use a ruberoid, which has proven itself for a long time. Folgoisolone is recognized as one of the most suitable vapor and waterproofing materials. It is also called foamfoil. This porous polyethylene of a special structure, which is covered with a lavsan film with metallization, looks like a polyethylene covered with foil. On sale, it is usually found in rolls.

Given the correct selection of materials and good waterproofing of the balcony can guarantee a long period of trouble-free operation.