Water heat curtain "Teplomash": instructions, photos and reviews

Heat curtains are engineering equipment that is used to exclude air mixing in different thermal zones. With the help of these devices, it is possible to effectively separate airspace. This can be an office and a refrigeration zone, as well as a room and a street.

The length is the main size when choosing such an aggregate. Ideally, it should be equal to the height or length of the opening. Sometimes deviation from the sizes up to 10% is supposed. It is important to pay attention to the heating method when choosing a thermal curtain. Devices of this type can be:

• Gas;
• Electric;
• Water.

As an example, you can consider a water heat curtain "Teplomash". Some models will be discussed below.

Reviews about the main features of the veil brand KEV-98P412W

This model costs 30 500 rubles. It is a fairly solid construction, in which materials were selected taking into account continuous operation. Installation of equipment, according to consumers, is possible in a variety of positions, in addition, the manufacturer has provided options for rapid installation. The device can easily be connected to central heating, saving on electricity. The device is controlled from the remote control. To ensure optimum performance, the device has enough functions.

Reviews about technical characteristics

The above thermal water curtain "Teplomash" can be installed in a room, the area of which reaches 572 m ² . Weigh the equipment 47 kg. The heating temperature is 33 ° C. The power consumption is 530 watts. According to consumers, the equipment has fairly compact dimensions, which are equal to 2020 x 298 x 391 mm.

Buyers are also attracted by the universal method of installation. It is important before buying, according to consumers, pay attention to the air flow characteristic, it is 5000 m ³ / h. The capacity of the equipment is quite high and is equivalent to 57.2 kW.

Feedback on the main positive features

Described in the article water heat curtain "Teplomash", according to customers, is characterized by simple management. The console has a display, as well as buttons for adjusting the temperature and operation mode. The main advantage of this equipment consumers consider modern design and design features.

Instruction manual for the model

The thermal water curtain "Teplomash KEV 98P412W" should be operated under certain environmental conditions. The temperature should be between -10 and +40 ° C. Important is also the relative humidity, which should be at 80% or less. This is true at a temperature of +20 ° C.

Operation of the device at negative temperatures is possible if there are no air jams in the hot-air heater. To air, special requirements are made when using the veil. For example, it should have an allowable amount of dust and other impurities - no more than 10 mg / m ³ . In the air there should be no dripping moisture, as well as substances that would act aggressively on carbon steel, copper and aluminum.

The water heat curtain "Teplomash", the operating instructions of which are supplied in the kit, has a finning made of thin sheet aluminum. It is important during operation to exclude the possibility of its bends, damages and dents. The manufacturer advises to manipulate the device very carefully, keeping it exclusively for the channel.

Reviews about the main features of the veil brand KEV-20P211W

This equipment will cost a little cheaper, its cost is 13,200 rubles. It has the appearance of a device that is designed for installation in a doorway with a width of 1 m. According to the consumers, this unit guarantees protection against ingress of dust, air and insects into the premises.

The device has a classic design that will not be able to disturb the interior. The model is supplemented by a remote control panel, which, according to consumers, provides comfortable control and configuration. This model was created using the newest technologies and durable materials, all this guarantees a long service life, even if the curtain is operated at maximum loads.

Reviews about technical characteristics

The water heat curtain "Teplomash KEV 20P211W" can be installed in the opening, the maximum height of which is 2000 mm. The recommended area, according to the buyers, is quite high and equal to 79 m ² . Weigh equipment is only 16 kg, which quite often makes buyers choose this particular model.

The air heating temperature is 23 ° C. The power is 7.9 kW. The air flow rate is equivalent to 1000 m ³ / h. Buyers especially emphasize the universal way of installation, this indicates that the veil can install any home master. In addition, the dimensions are quite compact and equal to 1014 x 281 x 231 mm.

Instruction manual for the model

The thermal curtain of water "Teplomash KEV" should be operated at observance of safety measures. For example, the maintenance of the device should be entrusted to specially trained personnel. Operation can not be carried out without grounding. It is forbidden to use the neutral wire as a grounding. Its removal must be carried out on the terminal block.

Maintenance work must not be carried out on operating equipment. This applies to the tract under pressure. You can place the equipment above the opening - horizontally or vertically - above it. Sometimes to improve the efficiency of the system the equipment is installed on both sides. In any case, the nozzle should be located as close to the top and sides as possible. The exit angle of the jet should be in the range of 10 to 30 ° in the direction of the street.

It is important to remember that the choice of the curtain parameters will depend on the features of the opening and the room. Thermal veils "Teplomash" water are usually installed by specialists. However, if you decide to do this job yourself, then you should use the universal brackets that come with the kit. They can be used for vertical and horizontal installation.

Conclusion

If you decide to fix the veil to the ceiling, then you must use other brackets, they should be purchased additionally, as they are not included in the delivery. The Teplomash water heat curtain is fed from a single-phase network, and the connection is made by a cable whose dimensions are 3х0.75 mm ² . The master should observe the rules for the operation of electrical installations when the device is connected to the network.