Thermal guns on diesel fuel. Thermal gun: instruction, price and reviews

The support of heat inside the garage in winter is especially relevant if you need to tinker with the car, so the heating system must be efficient and reliable. With this work, the thermal cannons are well catered for in diesel oil. They are sold in shops where you can buy tools, car parts, and much more in this way. Thermal guns on diesel fuel are characterized by good performance, save the owner's money, and with proper handling do not pose any danger to health.

general characteristics

To understand the advantages of such equipment, you need to know what it is. Diesel heat gun operates on a simple principle, similar to that used in domestic heaters - there is heating of air with its subsequent injection into the jet. When it is in a cold surrounding space, hot currents give their energy to the masses of cold air. This cycle continues until the entire internal space is heated up to the optimum temperature.

Device

Thermal guns on diesel fuel are equipped with a reliable metal casing designed to protect the heating element and the blower from damage or penetration of objects that can catch fire and cause a fire.

The design necessarily includes a safety element that disconnects the system in case of overheating. Therefore, heat guns on solar oil can be safely turned on to warm up the room in which you are doing something, and do not worry much. However, no one abrogated the safety precautions.

Principle of operation

Thermal guns on diesel fuel, the prices for which start at 3,500 rubles, consist of several basic elements: a fan driving air through the heater, a heating element, and also the housing in which everything is located. This description is quite general, but there is no need to understand the intricacies of the device of such equipment to those who use it. If the profession of man is the repair of heat guns, then this is another matter.

So, everything is clear with the device, and with the principle of work here everything is not much more complicated. Due to the combustion of fuel, air is enriched with heat. By the fan it is driven through the heating zone. And how exactly the air is heated, and allows you to divide the gun into two categories.

Types of heat guns

Speaking about safety, many people can think about where the combustion products go, because the diesel burns up and forms certain substances that need to be removed. All these compounds are quite dangerous for human health, so it is important to take care of their withdrawal. And then it's time to talk about the fact that heat guns on diesel fuel are of two types: direct and indirect heating. Each of these species has its own characteristics, features and opportunities for use.

The thermal cannon diesel indirect heating is well suited for a garage. This design assumes the presence of a branch pipe - it is designed for the removal of waste gases. A hose is attached to it, which can then be taken out to the street. This will not lead to any significant heat loss, however, harmful carbon monoxide will not accumulate in the room , as well as other substances that pose a health hazard. That is why a diesel heat gun is widely perceived as the best option in comparison with gas models. Many gas appliances do not have such a way of removing combustion products, so it will be necessary to open a garage for ventilation, which will cause significant losses of precious heat.

Direct heating heat gun

This option is not suitable for the premises in which people are located, because the combustion products of diesel fuel are mixed with hot air and accumulate in the room. Therefore, the choice should be based on the most thorough study of information about the device. If you need a heat gun, the instruction to which indicates the impossibility of its use in a room where people are, then it is worth pondering before buying it.

Scope of application

Thermal guns on solar oil can be found in many places. They are usually used for heating, during the installation of stretch ceilings to accelerate the process of heating the film, as well as wherever there is a need for mobile devices that can quickly and not too expensive to heat rooms of different sizes.

The most widespread heat guns, reviews of which from users in the majority only positive, have received as devices for heating of warehouses, building halls, and also other places where heating is required, but the use of traditional equipment is difficult or impossible for any reasons . In particular, such devices become relevant for buildings in which there is no direct connection to electrical networks. The work of the heat gun also requires a certain consumption of electrical energy, but it should not be too much, so a small portable generator is able to cope with this task.

Species

Thermal guns on diesel fuel, using infrared radiation, deserve special attention. This type of equipment produces room heating without the use of a fan, while the air temperature does not increase due to its direct heating. Like all infrared heaters, such a gun produces heating of planes and objects, rather than air masses inside the room. The heating element here, as well as in all other cases, works at the expense of burning fuel, however without attraction of the fan. This makes this device completely silent during operation, which adds certain advantages to it.

Rules of operation

The basic requirements for the use of equipment differ depending on what type of instrument is used. If we are talking about a gun with direct heating, then a qualitative ventilation of the heated zone is required. Most often, thermal units are used for local heating of rooms with good ventilation or semi-enclosed type. Heaters using indirect heat transfer are not so stringent, since a chimney can be used to divert combustion products.

Heat guns on diesel fuel are increasingly used to install tension coatings in the premises. The operation of such units requires a minimum fuel consumption, which significantly reduces costs. In this case, the requirements for the organization of operation of the device assume the organization of exhaust gas removal, which, as was said above, is done very simply.

Benefits

The price of a heat gun can range from 3,500 rubles (depending on capacity and manufacturer), and its upper limit is not limited. Such heaters are able to work not only on diesel, but also on kerosene or used oil. Due to small additions to the design, it is possible to use such fuel, as a result of which the equipment economy is increased several times.

The main advantage of such devices is their mobility. They weigh very little, and their main mass is a fuel tank, the dimensions of which depend on the power of the device. Thanks to this, it is possible to transport equipment without any difficulties and install in different places.

Quite a large model line allows you to choose the appropriate option for solving any problems. The maximum efficiency of the heat gun is ensured even with its minimum dimensions, while the cost of maintenance is also difficult to be called significant.

This becomes quite relevant in those moments when it is required to quickly and very strongly warm up the room in which repairs are carried out. In particular, when installing suspended ceilings. Using the gun, the air warms up to the required temperature. Due to the high mobility of such a heater, it can be brought into the room without any difficulties, and then removed from there. To do this, there is no need to attract additional personnel, all done by the masters who perform the direct installation of the coating.

Repair of heat guns is also not very difficult. These tasks require a minimum set of tools and basic knowledge in the field of heating equipment operating on liquid fuels.

Advantages

Safety is a significant factor when choosing a device for heating. According to this parameter, gas guns lag far behind diesel ones, and electric power requires access to the power supply network. Therefore, it is the diesel variant that can be considered optimal.

Reliability is an important parameter, and it is he who suggests that it is better to choose in favor of such equipment. The thermal cannon diesel indirect heating is practically not susceptible to breakage, and its repair is much simpler than in the case of using gas aggregates.

All these factors speak in favor of the fact that it is reliable, economical and convenient equipment. The only thing that can cloud the use of such heaters is the requirement for the presence of a gas pipe or ventilation.

Conclusion

It is already clear what the qualities of thermal guns. Reviews of such equipment speak about the maximum convenience and ease of use. All who have had to use it testify that this is a modern way to warm up any room quickly and efficiently. Such devices are in great demand among repairmen of the premises, since with their help a whole series of operations are performed. The price of the heat gun is quite affordable, so this device pays off very quickly.