The best liquid for removing paint from metal machines: description, review, instructions for use and reviews

Unfortunately, the paintwork has a certain lifespan. Every year, the paint dims and changes its properties. The car looks less attractive. To refresh it and return the car to a fresh factory look, the question arises of re-painting. But it's not recommended to apply enamel to the former specialists. For better adhesion, the whole surface should be carefully prepared. The best way is to remove paint from metal. We will talk about it today.

Manufacturers

There are several popular manufacturers of these funds. The following brands should be distinguished on the Russian market:

• Eltrans-N.
• "Abro".
• Permatex
• "Vertex".

How different are they from each other? And which one is the best liquid for removing paint from metal machines? The answer to this question we learn in the course of testing.

"Eltrans-N"

The product is called: "Wash the old paint." The manufacturer declares that this product is excellent for removing various types of paints, namely:

• Polyurethane.
• Vinyl.
• Oily.
• Alkyd.

Also in the composition, propane-butane gas (as a propellant) is used.

The product removes enamels from both metal and wooden surfaces. The instruction says that the product should be thoroughly shaken before use. Then the product is applied to the surface of the body. The duration of the drug is from 10 to 60 minutes. During the test, no chemical processes occurred after 20 minutes. The enamel did not even spread out. It lasts a very long time. This is his main drawback. Also, the reviews note the absence of products in aerosol cans. I have to buy a brush. In this case, the drug falls on the LCP with a transparent film. It is difficult to determine from it how much of the product was sprayed.

But it is worth noting that this is the cheapest liquid for removing paint from metal. The price for a 500-ml bottle is 500 rubles.

"Abro"

This is a famous manufacturer from the USA. The company has been operating since the 30s of the last century and has an extensive range of products. Among her - a liquid for removing the old paint from metal. It is sold in aerosol. The volume of the can - 283 grams. The cost of the product is 350 rubles.

The product is intended for removal of enamel, varnish and epoxy compounds from various surfaces. This is ceramics, metal and wood. However, surprisingly, the liquid for removing paint from metal is not suitable for plastic, although it has a good effect of action.

The instruction is quite simple - you should shake the can and gently spray it on the surface. The product contains acid, so the presence of rubber gloves is a must.

The instruction says that the product is valid for 10-20 minutes. During the tests, "Abro" proved to be the best. After application, the paint begins to build up and flake off the surface. It took 15 minutes to complete the action. The product met the manufacturer's deadlines. Aerosol coped with 90% of the paintwork.

As for the reviews, they are quite positive. The drug acts quickly and is easily applied. However, experts warn of fakes. Since this is a well-known manufacturer, you can run into a counterfeit. Therefore, always compare the price and look at the marking.

Permatex

This is already a Japanese tool. Also suitable for removing sticky labels. Unlike the American "Abro", the product can be used on plastic surfaces. However, in the Russian market, Permatex is not very popular. In view of this, its price is 14 dollars or about 860 rubles at the current rate. The manufacturer states that the product operates at a temperature of +5 to 38 degrees Celsius. The operating time of the solvent is from 10 to 15 minutes. During the tests, this tool did an excellent job. The liquid is evenly applied thanks to the spray torch, and immediately begins to peel off the paint. In this case, the substance forms a small layer of foam.

How does the product "Permatex" work? Experts say that this is not the best liquid for removing powder paint from metal. She copes with stickers "with a bang." But with good paint is not very. Since the product is of universal use, it has removed only 30 percent of the enamel from the metal surface. Therefore, the Japanese tool is not very suitable for preparation for painting works.

"Top B-52"

It is a destroyer of paint coatings of domestic production. The instruction says that the product perfectly copes with ether-cellulose and water-dispersive enamels, as well as with varnish and automobile putty. The manufacturer declares the validity of 20 to 30 minutes. The cost is more than affordable - 200 rubles for 850 grams of the product. True, "Top В-52" is sold only in the bank. The reviews indicate that you need to buy a brush to use. The destroyer of paintwork has a gel-like formula, due to which after application on the surface a uniform and thick layer is formed. Also, when using the product, accidental splashes on the adjacent surface are prevented. The liquid is very thick. In this case, the instructions do not appear on the shaking. The drug can be applied immediately at plus temperature. After 30 minutes of time, 7 percent of the paint was removed from the surface. Surprisingly, the product was not as effective as the manufacturer said.

Results

So, what kind of liquid for removing paint from metal fits best? During the tests, the best estimate was obtained by the American-made drug "Abro". This product is very liquid in the Russian market and has an acceptable value. Silver among themselves divided "Permatex" and "Top B-52". The first has a rather high cost, and the second solvent is less efficient, but more affordable in terms of price. Well, the worst is the remedy for Eltrans-N. Washing failed the tests, and does not meet the declared characteristics.

How to distinguish a fake?

As we said earlier, there are many fakes in the car chemistry market. And they can be sold at the same price as the original. How to determine whether the original is a liquid for removing paint from metal, or not? Many people say that the logo is embossed. However, this badge can be not only on the original, but also on counterfeit products. Modern technology allows you to master any way of marking.

But what is not present in the fake products of the "Abro", so this is the corresponding inscription below. The original has the inscription "Made in China under the control of ABRO INDUSTRIES, INC., USA". On fakes are limited to only the first three words. The same applies to other products from the American manufacturer (for example, sealants). The latter are packed in boxes of 12 pieces. Counterfeits are also packed in boxes of 144 pieces.

So, we examined the main manufacturers of auto chemical goods. Now you know how quickly and easily remove the old paint from the metal.