Than to stick a tree to a tree? The choice of glue and the rules for its application

One of the most popular materials in construction and many other manufacturing industries is wood. Therefore, it is often necessary to glue wooden parts in order to obtain permanent joints. For this, an extensive assortment of different compositions is offered, thanks to which there is no task easier than to glue a tree to a tree.

Kinds of glue

Of all types of glue, which differ in their composition and characteristics, it is necessary to choose the one suitable for the solution of the corresponding problem in order to obtain an ideal result.

• Glue PVA quickly and qualitatively glues wood, leaving virtually no traces. But when exposed to water, as well as low and high temperatures, it partially loses its properties.
• "Moment" is a universal waterproof glue for gluing wood and not only. Effective and for gluing to wood other materials. Provides instant grasp.
• Heat-resistant glue for wood does not lose its properties under the influence of high temperatures, does not crumble and does not crumble. Therefore, it is most often used in carpentry.
• Polyurethane adhesive is highly adhesive when bonding solid wood. Full grip provides 20 hours after application. It is not afraid of moisture, it is resistant to high temperatures and long loads.
• Casein glue has the same characteristics as polyurethane. The disadvantage is its ability to change the color of the wood to be glued.
• Epoxy adhesive is suitable for all types of wood, completely dry after 24 hours and leaves no residue.

Which composition should I choose

Deciding how to glue a tree to a tree, it is necessary to take into account the versatility of using adhesive. Some species are suitable only for working with a certain type of wood, others are able to glue absolutely different types of wood. It is also important what certain goals are to be achieved, for example, gluing together broken wooden objects or performing facade work. An important role in this is played by the composition of the glue and its quality.

Household Recipes

There are many recipes for how to make quality wood glue yourself. To do this, you can buy ready-made casein in the form of a powder or get it at home. Lean skim milk for souring in a warm place. When it is fermented, filter with gauze and the resulting casein is rinsed in water and boiled to remove fat. Then spread it on paper, dry it well and mix it with borax (1 part of borax into 10 parts of casein) to the consistency of the dough. Dilute the resulting mass with water (2 parts) and apply the resulting adhesive immediately, since it hardens after 2 hours.

General rules for bonding

There are rules for the work on the gluing of wooden parts, which must be observed regardless of which adhesive is chosen.

Before you glue the tree to a tree, you need to thoroughly clean the surface. You can do this using sandpaper or file. After that, dry the parts and apply a thin layer of adhesive composition with a brush and gently rub. Glue lubricates all surfaces intended for connection, then they are tightly pressed against each other using a press or in another way until the composition is completely hardened.

When working with any glue, it is necessary to observe precautions, since even the most harmless composition is sometimes able to cause the strongest allergic reaction. Therefore, gluing wood should be carried out in rubber gloves. If the glue still got on the skin, you need to gently wipe it and thoroughly wash the affected area with soap. In case of contact with eyes, rinse immediately with plenty of water.

If you have a good understanding of how to glue a tree to a tree, and follow the instructions for the application of the adhesive composition, the place of joining the parts can be much stronger than the wood itself.