Than to seal a joint between a bathroom and a tile: installation foam, silicone hermetic. Bathroom Repairs

After the repair in the bathroom, the inevitable question arises as to how to close the gap between the plumbing and the coating on the wall. After all, if you do not take any action, water will come here every time you swim. It will accumulate behind the bathroom. As a consequence, after a very short period of time, one can expect the formation of a fungus behind the bath. And this, as you know, is not the best neighbor.

. To avoid health problems and destruction of finishing materials, you need to know what to seal the joint between the bathroom and the tile . There are many options. Which one to choose depends on several factors. To qualitatively carry out such work, you need to familiarize yourself with the main features of its implementation before it starts.

Why does such a problem arise?

комнате многие хозяева выполняют своими силами. Repair in the bathroom many owners perform on their own. This makes it possible to save considerably the means of the family budget. However, not having enough experience in carrying out similar works, novice masters can make a number of mistakes. Because of this, the bath does not fit snugly against the wall surface.

Even when carrying out repairs by professionals, the gap between plumbing and ceramic coating will be at least small, but sufficient for penetration of water. To hedge, installers often seal the joint in various ways.

A wide gap is obtained if the tile was laid before installing the bath. Also, uneven walls, inappropriate sizes of plumbing can lead to the formation of a wide gap. But even with a good installation of the bath, the joint should be sealed in one of the ways listed below.

The oldest way

, следует рассмотреть несколько способов решения этого вопроса. Studying how to close the junction between the bathroom and the tile , you should consider several ways to solve this issue. The oldest is the use of cement mortar. To give it moisture resistance, the surface of the seam was covered with a special agent.

Before the procedure, the surface of the bath and the wall must be thoroughly cleaned from various contaminants, degrease. To ensure that the cement does not fall behind the bath, the gap from below is covered with any convenient improvised means.

Work surfaces are wetted with water. So the solution will better grasp. The joint is poured with a solution. Cement should be sufficiently viscous to evenly lie on the surface. After completely drying, the cement joint can be painted or glued with a special tape.

Modern ways

комнате выполняется с применением более совершенных материалов. Modern renovation in the bathroom is done using more advanced materials. They extend the life of plumbing and finishing. Cement solution is now used very rarely.

To work quickly and efficiently, you can use waterproof sealant, mounting foam or grout. These materials are simply applied to the work surface. They can be easily corrected if necessary, until the material has dried up.

Also on sale is a wide selection of different ribbons and plinths. They reliably close the joints. To improve the result, some masters apply a combined approach. In this case, you can be sure that the water does not seep under the bath, it will not accumulate in the seams between the bathroom and the wall.

Application of grout

, в первую очередь следует обратить внимание на затирку. Deciding how to cover the joint between the bathroom and the tile , the first thing to pay attention to grout. It is a durable, waterproof material. Its advantage is considered a large number of shades. This allows you to perfectly match the color of the seam under the existing interior elements.

The most popular, in spite of everything, remains a white grout. The bath often has this color. Grout is used when the gap that is required to cover is insignificant. This substance does not require special skills from the master. Everything happens simply and quickly. The seam will be moisture resistant and will retain the original shade for a long time.

Apply the grout with a spatula. Then the layer is treated with a special tool against the accumulation of dirt on the material. However, if the gap is quite large, this method will not work.

Mounting foam

. If the gap is not more than 1-2 cm, the craftsmen often use such material as a waterproof mounting foam for the bathroom . This is a pretty good way. Mounting foam with moisture-resistant components will be durable and reliably protect the bathroom floor from getting water on it.

But using this tool requires accuracy. Otherwise, the end result will be unsatisfactory. When the foam hits other surfaces and freezes, it is very difficult to remove it. Therefore, along the joint paste tape of paint tape. The floor should be covered with newspapers or plastic wrap.

To carry out the work the master must wear a robe (or things that will not be pathetic to smear), a mask and gloves. Work surfaces are cleaned of dirt. The joint is swollen with foam. After it dries (after a day or two), excess material is cut off. Next, you need to close the seam with a plastic corner.

Application of sealant

If the gap between the plumbing and the wall is small, you can use acrylic, silicone sealant for the bathroom. This is one of the most modern and reliable ways. There are colored sealants, but most often they use their white varieties.

Acrylic sealant is used less often. The bathroom is more suitable for silicone varieties. They include special components. This prevents formation of mold, fungus and microorganisms at the seams. Sanitary white sealant is ideal for the purposes presented.

To carry out the work, a special sealant gun is required. But it can be bought at any construction store for a fairly small price. The gun can be used for economic purposes in the future. Perform all the actions well even a master without experience.

Application of sealant

, следует подробно рассмотреть процедуру нанесения герметика на рабочие поверхности. Studying how to seal the joint between the bathroom and the tile , it is necessary to consider in detail the procedure for applying sealant to the work surfaces. They should be degreased and dried. To do this, you can use any solvent. To ensure that the material does not extend far to the bathtub or wall, they are stuck with paint tape.

A balloon with a sealant is inserted into the gun. After removing the protective cap from the tube, a small amount of material is squeezed out. It is carried out around the joint. The sealant is an elastic substance. Therefore, it will close the cavity well. In one pass the required sealant layer is applied.

The substance is first spread with a spatula over the interface. Next, you need a brush and soap solution. With the help of such tools, the material that has not yet been solidified is qualitatively aligned. Surplus can be removed with a damp cloth.

Application of plinth

закрыть только при помощи герметика или пены невозможно. Sometimes the seam between the bathroom and the tile can only be closed with sealant or foam. This is due to the large distance from the bath to the tiled surface. In this case, you should resort to using special skirting boards. Often they are supplied complete with tiles.

If the gap is more than 4 cm, you can apply ceramic, plastic, polyurethane curbs, as well as self-adhesive tapes. Before working, the working surfaces are prepared accordingly.

After the measurements, the required length of the plinth is cut off. An adhesive is applied to the inner surface of the product. You can use "liquid nails". After that you need to wait a few minutes. Then the skirting board is placed on the place reserved for it and firmly press it. Particular attention is paid to the corners.

After fixing the plinth, its upper and lower edges are treated with a sanitary silicone sealant.

Flexible tape

можно закрыть при помощи гибкой самоклеящейся ленты. The gap between the bathroom and the tile can be closed with a flexible self-adhesive tape. This is a simple option, suitable even for a fairly large gap. Such products are quite flexible. The tapes come in various sizes. This allows you to choose the best product for your bath.

The back surface of such tapes already has a special adhesive layer. Thanks to this, the installation is very quick and easy. In the center, such tapes have a bend. This adds comfort during installation.

It is required to thoroughly clean and dry the base of the wall and the side of the bath. A protective layer is removed from the back of the tape. Now it can be glued to the surface. To grasp was good, the tape can be slightly heated with a hair dryer. The product is applied to the slit and pressed.

This is a sealed and aesthetic joint. However, its strength is inferior to solid skirting boards. Also, the lifetime of the ribbon curb will be less.

The combined approach

, следует сказать несколько слов о комбинированном подходе. Considering the basic means, than to seal a joint between a bathroom and a tile , it is necessary to say a few words about the combined approach. In this case, several of the approaches listed above are used to create a sealed joint.

Initially the joint is closed with a mounting foam. The whole procedure is performed according to the scheme presented above. After cutting off excess dry foam on its rough surface, a layer of sanitary sealant with water-repellent qualities should be applied.

After the drying of all layers, a semi-rubber flexible tape is glued to the surface. You can also use a rigid skirting board. The basis of foam and silicone sealant will create a qualitative sealing of the gap. Border or ribbon, located on top, create a beautiful decorative effect.

, каждый хозяин сможет выбрать наиболее подходящий для себя способ. Having considered how to seal the joint between the bathroom and the tile , each owner will be able to choose the most suitable method for himself. Performing all the actions in accordance with the instruction, it is possible to obtain a qualitatively sealed joint that is resistant to moisture and fungus formation.