Table top for the kitchen with your own hands. Table tops for kitchen from chipboard

Each kitchen should be at the maximum convenient and functional. But to achieve such indicators, it is important to choose the right furniture and materials, from which it will be manufactured. This should be taken into account also in the event that, for example, a countertop for the kitchen is made by hand.

Which material should I choose?

The worktop in the kitchen is almost the central element. In addition, it forms the interior of this room, it also has important purposes: it is on this surface that all actions are performed (vegetables are cut, pans are put). Accordingly, to make such an attribute as a table top for Kitchen, With their own hands, you need to choose strong and easy-to-use materials that will be resistant to various influences and at the same time give the room a winning look. The kitchen table should be strong, resistant to mechanical influences and damage, it should be easy to clean. Today you can create a surface in the kitchen with:

• Artificial stone;
• Tiles;
• Wood, including chipboard;
• Tiles and much more.

Budget option: countertops for Kitchens of Chipboard

Of course, the surface, tiled or artificial stone, will look stylish and chic. However, many are looking for budget solutions to the problem of finishing the kitchen, and the EAF for this is the best. By the way, the size of the countertop for the kitchen depends on several factors:

• The location of the table in the room;
• From the ratio of the size of the kitchen and the kitchen.

Well, personal preferences of residents are not the least. Standard worktop has a thickness of 3-4 cm with a length of one and a half meters and more. The width, as a rule, averages 1.6 meters.

How to create a surface from chipboard

Of course, the wooden countertop for the kitchen is a profitable solution, but by no means the most correct one. This is due to the fact that in rooms where the temperature is too humid and constantly changing, the tree can crack and crack. Accordingly, it is necessary to work hard to properly process this material.

To make the table top made of chipboard, we need to prepare all the materials and tools. First, for the creation of supports we will need sheets of chipboard, as well as a beam size of 40 to 50, which is attached around the perimeter of the wall: it will hold our kitchen countertop. It is very profitable to create it with your own hands, since all materials are inexpensive and easy to find. In the second stage, we attach the plywood to the boards (its thickness should be about 1.5-2 cm), and it should keep our table tight and secure. On top of the plywood can be glued tiles, tiles or other material - it all depends on your capabilities and preferences.

If you want to change Countertop on Kitchen, then do it with the help of chipboard - the most simple and profitable solution. Moreover, in terms of quality and reliability of operation, the surface created by ones own hands will not be inferior to the shop surface.

Tile or tile?

The worktop can be made from different materials. For example, if you are trying to equip your kitchen in a certain style solution, you can choose for it a marble coating or tile it with tiles. If you like a marble countertop for the kitchen, creating it yourself will not be so difficult. We will need:

1. Beam: a frame will be made of it, so it should be flat, solid, thickness 40 to 50 or 50 to 50.
2. Sand, gravel, cement: on their basis will be created a "foundation" under the countertop.
3. From metal bars we will perform reinforcement.
4. Fillers for concrete.
5. Board (they are needed to create the formwork).
6. Aluminum profile for finishing edges.
7. Liquid Nails.
8. Materials for finishing.

To assemble the frame and formwork, we will need a drill, a screwdriver, an electric jigsaw, a Bulgarian, a tape measure and a level.

Create a skeleton

The worktop based on the concrete slab will be quite heavy, so you will need to create a skeleton. For this we need to know Dimensions Countertops for Kitchens : on the basis of this data we cut the bars of a certain length, which will serve as posts. We attach them to the floor using metal corners. At the junction of the posts with the walls, it is necessary to drill them and fix them by means of anchor dowels. We finish frame frame with the help of horizontal jumpers, which are mounted on the racks. The frame must be checked for durability, since all the load will fall on it.

We take the boards and from them we make the lower part of the table top, as well as the formwork. It must be assembled in such a way that it can always be removed without damaging the concrete. If there is to be room in the counter for a sink or hob, these areas should be marked with bumps. The entire formwork should be covered with a plastic wrap to protect the structure from the concrete mix.

Preparation for pouring concrete

In the formwork for the beginning we put the reinforcement, which is connected with each other: the more the filling of the base is the more effective, the stronger the table top will be. We prepare the mortar from cement, sand and gravel in the ratio 1: 2: 2. For the solution to be of high quality, add plasticizers to it. The solution should turn out to be flowing. If it should simulate, for example, marble, we add to it the corresponding pigment (it can be purchased in building stores). The finished solution is poured into the formwork, leveled, covered with a film and left to dry for about 10 days. To get moisture-resistant kitchen countertops , you need to make sure that the solution does not dry up: if necessary, the surface can be moistened with a spray gun.

Finishing: finishing touches

This is the last stage in the creation of a table top. We will consider two options: tiling or polishing concrete. In the first case, a special glue is applied to the surface for the tile, evenly distributed, after which the tiles are laid. Do it carefully, firmly, evenly, so that the surface turned out to be of high quality. All the seams must be aligned. The main thing is to correctly calculate the size of the countertop for the kitchen and the amount of material for finishing it.

If you choose a method such as polishing concrete, then first you need to grind the surface of the countertop. Our goal is a perfectly smooth surface. By the way, we use for this purpose a grinding machine and disks of different granularity. After these works, the surface must be removed from the dust and treated with a special impregnating compound. Having such a machine at hand, you can always polish the surface of the countertop, and it will look like a new one.

What are good homemade countertops?

First, there is the opportunity to choose the optimal color combination, as well as the shape of the kitchen set. Secondly, it is possible to significantly reduce costs in comparison with similar finishing by specialists or purchase of new furniture. Third, by creating a countertop with your own hands, you can control every step of the process, paying attention to any little things. Fourth, you can independently perform all calculations, pick up materials for finishing, which I would like to see in my kitchen. If you follow the rules described above, the table top with your own hands can be created very simply. And do not necessarily use for this EA: expand the boundaries of your imagination and learn to work with new materials. The beauty of your kitchen is in your hands!