Summary of the welder: sample compilation, features and recommendations

During the crisis it is very difficult to find a good high-paying job. The key to success in this case is the competent preparation of recommendations and summaries. Even as an experienced professional, you should indicate all the necessary skills and achievements. Now many companies are focused on working professions. It is in this direction you can make a living. Yes, and work "hands" in demand, like no other. In this article, you will learn how to properly draw a resume using the example of a welder, and what are the most important features to indicate.

Professional skills

In Russia, the profession of a welder is now in demand, like no other. The whole industry - heavy, chemical, oil, and also construction and other areas need qualified welders. But how do you indicate in the welder's resume that you are really a good specialist with extensive experience of working with different welding skills?

Welder is a specialist engaged in various types of welding of metals and alloys. As in many industrial professions, here every mistake can cost lives to one person and the whole group.

Therefore, qualified welders are always worth the weight of gold. To write a resume welder, Initially, it is necessary to indicate a vocational school in the specialty of welding production, where the training was passed. It will not be superfluous if you specify all the exams and test certificates in local bodies, for example in Rostekhnadzor.

Welder duties

A specialist in welding production is, first of all, a person connected with physical labor, as well as the risk of obtaining occupational diseases. Therefore, it is highly advisable for women to hold this position. Men also undergo a medical examination on a regular basis, which reflects the right of admission to welding.

Below are the immediate duties that can be included in the welder's resume, the sample Which is presented at the end of the article:

1. Knowledge of alloys and technology of cutting metal products for further production.
2. Planning and analysis of future work on welding of alloys.
3. Welding according to approved work plans.
4. Compliance with labor protection and electrical safety requirements.
5. Maintenance of accounting records.

As you might guess, examples of a welder's resume do not tolerate slyness. It is important to indicate only real skills and qualifications.

Qualification and labor market

The profession of a welder is always in demand in the sphere of industry and production. Each region requires gas welding. With diligent work, a welder, whose resume liked the employer, brings the appropriate results. A literate specialist, starting with a simple worker, can achieve a leadership position. Therefore, the salary is quite diverse. In Russia experts of the very last - VI category are most appreciated.

At the same time, the highest opportunities for specialists working in large oil companies, and the lowest in the housing and utilities sector.

Also in the resume of the welder it is important to indicate knowledge of the requirements of industrial safety and labor protection. Now this topic is very relevant both at the legislative level and in industry.

Argon Welding

One of the most popular types of welding now is argon. 40 years ago it was used in high-precision, space industry. It's hard to believe, but now it's used everywhere, from repairing planes to automotive equipment. Sometimes argon-arc welding is replaced with helium, but it is much more expensive, so it is used less often. Most often, argon welding is used in the alloy of aluminum products, since this metal is the most complex in production.

A resume for the work of a welder, a sample of which can be seen below, will look more advantageous if we add the skill of argon welding.

Argon welding is the fusion of gas welding and electric arc. The source of heating is an electric arc. And then gas enters into battle - argon, it will supersede oxygen and allows accurately and accurately to make a seam, without bubbles.

Principles of Argoner's Work

When working with argon welding, the objects are cleaned beforehand - all growths, fats and other precipitations and excess elements are removed. The welder uses a torch and a wire. Using his experience, the welder chooses the burner turn-on time, usually 20 seconds before the start of work.

When welding this method, you need the following: a transformer, a burner, a gas cylinder, a rectifier, an auxiliary transformer, a cylinder with gas and a reducer, an oscillator.

Specialists who know the method of argon welding are much less than conventional welders, so they are more valued, so you should remember to mention this point when writing a welder's resume.

When drafting a welder-argoner's resume, it is necessary to indicate which types of work were done, which non-ferrous metal alloys were used in the implementation of the measures.

Welder Summary

Here we smoothly moved to the part where the welder's resume is presented. The sample initially, like any other resume, contains personal information.

Ivanov Ivan Ivanovich

Welder

- Desired income - 45 000 rubles.

- Total work experience - 7 years, 10 months.

Further, the experience and place (a) of the work are indicated.

- CJSC Gazprom Stroytransgaz, Moscow.

- 3 years 7 months (date).

: Responsibilities :

- Semiautomatic, argon, manual welding of various metals at construction sites.

- Stripping and checking the strength of the joints.

- Joint-Stock Company "Argus-Promt", Izhevsk.

- 4 years 3 months (dates).

: Responsibilities :

- Semiautomatic, argon, manual welding of various metals at construction sites.

- Controlling the strength of joints.

- Gas cutting of metals of different complexity.

Then we specify education.

- The end date is 2009.

- Polytechnic college (or other educational institution).

- Secondary special.

специалист сварочных работ (газосварочные, электросварочные, аргонные). - Specialty: specialist welding (gas welding, electric welding, argon).

Achievements

- Attestation in the RTX on the 6th level.

Professional skills

- Attestation of the 6th category of NAKS GO, KO, NGDO, OHHNVP, UK.

- Excellent skills of the welder (argon, electric arc, gas and semi-automatic).

- Ability to cut metal by gas method.

- Ability to work with different types of alloys and metals.

- Knowledge of all the fundamentals of electrical safety.

- Ability to work with documents, reporting.

And most importantly - personal qualities. They play an important role, since they allow us to form a more detailed picture of the person as a whole.

Communicability, responsibility, diligence, resistance to stress and high physical loads, rapid response in emergency situations.

Submission of resume

We hope that this example will help to qualitatively work out and prepare a resume and answer all questions regarding the profession of a welder. For job search, the summary resume of the welder can be placed on popular portals or sent directly to industrial and manufacturing companies. During the crisis, many companies do not publish vacancies in order to cut costs, so do not be afraid to send CVs directly to the companies themselves. Do not miss your chance!