Stamp pad for printing

Many office workers have a stamp pad on their desk, designed to wet a stamp in special ink. Even if you can not see it immediately, you can safely say that it is present, because in modern snap-in equipment this device is hidden from the eyes.

Purpose

Office workers and offices that deal with seals, stamps and numerators simply need a stamp pad for printing. It provides uniform and clear impressions, which guarantee scrupulous accuracy in "paper" cases.

Also these pads are used for decorative purposes. Their porous surface contains a certain amount of paint that is capable of changing the color of different materials. This is how people's craftsmen learned to use this perfectly.

Without stamp pads, the use of seals becomes impossible. Therefore, since the time of their invention for several millennia, this adaptation remains an indispensable assistant to people responsible for order in business.

Variety of species

So it was already decided that each manufacturer tried to improve this unpretentious attribute of the desktop. Probably, many still remember the Soviet sponges with ink stamps, which simply dripped from the seals and left inaccurate tracks on documents, fingers, clothes.

Since then, much has changed. There was a pillow stamping replacement, which is used in automatic equipment. It does not require refueling and can dispense from 5 000 to 10 000 impressions, depending on its quality. Opposite to it - a desktop pillow which is intended for manual seals. But this is not a sponge for a long time, but a special porous material that does not even show that it is impregnated with a special liquid.

Single-colored and multi-colored pillows are also singled out. Multicolor is applicable only in automatic dies. They can not be refueled, as there is a risk of mixing colors.

Pillows with paint for official use and needlework are also selected. The latter are rich in shades, which is unacceptable in official business.

Types of seals

Which stamp pad is preferred is determined by the type of seals used. The simplest is a manual seal. All in life, at least once seen as she dipped in paint and put an impression. This is a cheap option, which is used mainly for temporary purposes. And all because such seals are inconvenient in storage and transportation. Their surface dries constantly, and the depressions are clogged with dried paint, which makes the prints indistinct.

It is more practical to use automatic snap-in. This is a special device, in which a stamp with an imprint is hidden. To leave a mark on the surface, just put the device on the right place and press it on top. The system itself will deploy printing in the right direction and produce a clear impression.

In such a device, the stamp is in constant contact with the paint. It does not dry out and does not clog.

Used paints

You always need to know what exactly to buy a stamp pad. The paint that is used to refuel them plays an important role.

The most common is a water-based ink. It gives a clear, saturated color when used on paper surfaces. At the same time, the material should be as porous as possible so that the water is absorbed and evaporated fairly quickly. Ideally, office paper meets these requirements.

Alcoholic inks are used in cases where the stamped surface is completely unable to absorb liquids. This is metal, plastic, wood, glass. After leaving the impression, alcohol evaporates in a matter of seconds. This makes it possible to get a stamping mark resistant to erasure and smearing.

Oil-based paints are most often used. They are completely unsuitable for use in offices, because they give a fatty trace that can pass through several sheets of paper. But in the production of this paint is indispensable. The trace left on the non-porous surface is quite difficult to deduce. Some experts believe that this is not possible at all.

Rules for the operation of ink pads

First of all, it must be remembered that this device is impregnated with easily evaporating liquids. Therefore, the stamp pad must always be closed. Also it is necessary to keep it away from sources of thermal radiation: batteries, heaters, kettles and direct sunlight. Otherwise, it will dry up over time. Refueling is contra-indicated for most modern models. From this, the pillows lose their properties and begin to leave blots together with prints.

If the pillow can be filled, then for this purpose it is necessary to use only the recommended stamp ink of the same shade as the pillow. The ideal option will be if both the paint and the pillow are of the same manufacturer. In this case, it is easy to avoid a conflict of shades and ingredients.

Make sure that the pillow is not contaminated with foreign dyes or other rubbish, such as dust or water. If you comply with all the rules, then it will serve you a device much longer than 10 000 impressions.

Color wealth

Normative documents prescribe which type of stamp and stamp should correspond to one or the other color. Therefore, no one in the document circulation uses paint at personal discretion.

The most common colors are blue and black. Blue leaves the prints of most official round seals. Black is more common in corner square stamps, numerators and daters.

Forbidding seals and bounce stamps are usually red. It is also used by some non-governmental medical organizations, such as the "Red Cross".

But permissive stamps are usually made in green. There is some symbolism in this: green color always opens the way for those who need it.

For some organizations and departments it is prescribed to use prints of several colors. There are black and red, blue and red, red, blue and green. For these purposes, a special stamp pad is used, which is pre-divided by the manufacturer into sectors preventing mixing of colors.

For the purpose of needlework

More recently, a kind of handicraft appeared, which was called scrapbooking. His goal - the production of postcards, calendars, albums and notebooks. At the same time, various materials and techniques are used to achieve maximum decorative effect.

Widespread among the handicraftsmen received the ink pad for scrapbooking. They differ from office ones not only by the richness of colors, but also by some design features.

First of all, these pads are used to tint the surfaces. Therefore, the spongy substance protrudes slightly above the edge of the box. Also, manufacturers took care of the ergonomics of the packaging, since the box itself is often held in hand. Those who master this art are unlikely to ever abandon it.

Where to buy?

A good stamp pad should only be sold in a specialized store. In markets, this device can cost less, but not the fact that the resource of its service will be at least half of what is claimed in the branded stores.

For scrapbooking, pillows are sold mainly in handmade departments. Although in recent years, even some stationery is not against offering craftswomen the opportunity to replenish their collection with new colors of stamps.