Silicone grease for treadmill

The period of operation of the treadmill depends on the care of the treadmill. The device should not only be cleaned of dust, but also lubricated. After buying it there is a lubricant, but eventually it evaporates. The lubricant for the treadmill can be of different types. It is necessary to use a high-quality tool, as well as to properly perform the procedure. Then the equipment will serve more than one year.

How often should I lubricate the machine?

It depends on the frequency of classes on the treadmill, as well as on the duration of the activities. If the device is not used, it is not required to process it. But with regular use, the simulator needs lubrication every month. Then the device will run smoothly.

What is used?

Silicone grease for treadmills is considered the best. It is sold in spray cans and in thick form in conventional containers. But it should be taken into account that the spray is ineffective for the treatment of the canvas and the deck, since the silicone in the cylinder has a lower viscosity and evaporates rapidly. Most manufacturers of treadmills produce silicone in the bubble with the simulator.

Homemade remedies should not be used. They adversely affect the operation of the equipment. In addition, their use can lead to the unfitness of the treadmill. Lubrication is an important part of care. It is desirable to use special tools that are suitable for a particular brand of the simulator.

Types of funds

In sports stores, treadmill grease is usually sold. "Sportmaster" offers to purchase a simulator along with this tool. Daytona should be used once a quarter or at a run of 200 km. Improve the quality of training will be helped by lubrication for treadmills. "Sportmaster" offers to purchase it and separately from the equipment. The processing procedure will reduce the load on the electric motor and make the movement of the canvas smooth. Due to this, the service life is extended. Before use, the aerosol must be shaken. Then it is necessary to raise the cloth, apply lubricant. The product should not fall on the outside.

Lubrication for the EFELE treadmill can reduce noise, prolong operation. The volume of the balloon is 405 ml. It contains information about the product and the manufacturer. The advantages include harmlessness to humans, lack of color and a neutral smell. You can use the tool for different simulators. Convenient nozzle nozzle allows you to handle hard-to-reach places.

Molykote Separator Spray is designed as an aerosol. The tool protects the simulator from deformation. The bottle contains 400 ml. Of the advantages can be allocated security, lack of color and smell. Can be used for different devices.

Silicone grease for the SIL-X treadmill is universal. Used to improve the appearance of parts, slow the aging of parts of equipment. Also protects from moisture, eliminates creaks, reduces friction. The canvas is perfectly lubricated without loosening and subsequent adjustment of the fabric.

You can use silicone oil, which is sold in different volumes, but the minimum is 100 ml. The facility is in demand due to the low price and good impact on the sports equipment. It is used as a standard lubricant.

Rules of performance of work

The simulator must be disconnected from the mains. Then, loosen the tension of the running belt. For this, the adjusting bolts should be turned on both sides. The cloth should be raised in the middle of its length. Then the lubricant is applied to the treadmill.

Then it is necessary to tighten the adjusting bolts to the number of revolutions, which was done with weakening. The simulator should be turned on at a low speed for a few minutes to distribute the product evenly. Then you need to check the alignment of the blade. Excess grease must be wiped with a rag. You should walk on the canvas for a few minutes, and then the simulator can be used in the usual mode. Lubrication must be carried out regularly, so that no repair of equipment is required.

The running track must be periodically lubricated: the product dries out over time, and the friction index increases. Therefore, the load on the engine and the belt will be greater, and this leads to a breakdown. If the simulator has not been processed, they can refuse warranty service. This procedure improves the sliding and cleaning of the fabric.