Scrapers for glass-ceramic plates: method of use and tool features

Plates with a working surface made of glass ceramics have become very popular among modern housewives. This material requires very careful use and, accordingly, the most delicate cleaning. But to avoid contamination of the plate and the appearance of drops of fat on it is simply impossible. In order to clean the surface without harm, scrapers for glass-ceramic plates are used.

Component parts of the instrument

Quick and safe cleaning of the surface is ensured by the presence of the scraper of certain constituent parts:

1. The blade - with the help of glass ceramics, pollution of any degree is removed. It can be fixed in one position or have the property of changing the slope and length of the working blade.
2. The handle is simply necessary for comfortable use of the tool. It can be made of metal or plastic.
3. Screw - provides adjustment of the blade position and its easy replacement if necessary.

Most manufacturers complete the scraper for the glass-ceramic plate with spare blades.

A tool with a plastic handle and a fixed blade has a shorter service life than that made of steel and allows you to change the position of the blade.

Why the scraper

Preference is given to this instrument for a reason. Any impact on the glass-ceramic surface of metal sponges and cleaning agents with abrasive particles can cause small scratches. As a result, the plate loses not only its aesthetics and its original appearance, but it also affects its future work.

Scrapers for glass-ceramic plates allow to clean them, without causing any damage. And since the working surface is regularly used and contaminated very quickly, the use of a special tool will greatly simplify the maintenance and extend the life of the electric cooker.

Method of using the scraper

In order to easily clean the slab, you must follow a certain algorithm of actions:

1. On a sponge with a soft surface, a substance intended for cleaning glass-ceramic surfaces is applied and evenly distributed throughout the plate.
2. For some time, the agent should dry.
3. After that you can start using the tool. The scraper for cleaning glass-ceramic plates should be located in relation to the surface at an angle of thirty degrees. Cleansing movement - back and forth.
4. If there are difficulties, it is necessary to check whether the blade is blunted, whether you are correctly operating the scraper.
5. After removing contaminants, wipe the surface with a damp sponge with a soft surface.

When the tool is properly positioned, cleaning the surface does not cause any inconvenience.

Important points

There are several tricks that help with severe pollution:

• If the stain is too hard and strongly adherent, you can treat it with paste (mix the soda with water to the state of sour cream), applying it to the stain, and put a damp sponge on top, after 10 minutes you can eliminate the contamination;
• Instead of the paste, you can use olive oil, to accelerate the process it is recommended to warm the plate a little, so the dirt starts to lag behind the surface and it will be easier to remove;
• Cleaning should be carried out only with the use of special means, with their help a protective film will be formed on the surface .

Scrapers for glass-ceramic plates will allow for a long time to maintain the surface in excellent condition.

Analogs used for cleaning glass ceramics

If it is not possible to use a specialized tool, it is replaced by the following analogs:

• Baking soda - allows you to eliminate even stubborn stains, while absolutely not harming the delicate surface;
• With the help of a weak solution of vinegar, it is easy to eliminate limestone deposits;
• The glass care agent can also be used to clean glass ceramics.

Scrapers for glass-ceramic plates, when interacting with cleaning agents, allow the surface to be cleaned faster and retained in aesthetic appearance.

It is important to note that the use of cleaning aerosols, which are used for cleaning ovens, is contraindicated.

Scraper for glass-ceramic plates: photo

Different models of the instrument have different effects on pollution. They can differ significantly in design and cost.

A plastic scraper has a lower cost, but is less practical. It can break down in a short time, and therefore such an acquisition is not always rational, especially in relation to the family budget.

Electrolux glass scraper scraper is better to choose with a metal handle. This will allow you to use it for a long time, the blade can be easily changed to blunt with a special screw.

The installation of new household appliances with a delicate working surface implies the acquisition of special tools that allow easy removal of a variety of contaminants. Scraper for glass-ceramic plate in this case will be an excellent assistant, even for the most accurate mistress.