Scarf-pipe with knitting needles: diagram with detailed description

The most popular thing for fashionistas and mods is snud, yoke, transformer, or scarf-trumpet. Spokes or a crochet it can be connected literally for a couple of days. For this product, any thread: wool, wool, acrylic, cotton, grass, angora. All this is possible due to varieties of snod, which can be both delicate, and dense, and delicate.

What is a scarf-tube?

The knitting needles are 15, 30, 40, 60 cm in width and 30, 40, 75, 85 cm in length. Such decorative scarves are long and wide. They can be worn with a noose, thrown over your shoulders like a poncho, covering your head like a hood. More often openwork snods do not warm, but perform a decorative function.

For the cold season, short pipes are tied to protect the neck. For these purposes, choose a large pattern (rhombuses, braids, rubber bands, bumps), since in this case, the underside of the product will not be visible. If the snitch will wrap around the neck several times, then pick up such a drawing so that you can not see where the front, and where the wrong side. For example, pay attention to the handkerchief, rice binding or gum.

Scarf-yoke can be worn with any clothes and in different variations. Most often the snore is worn with a long loop, like a hood, or wrapped around the neck in two or three turns. With the help of it you can give a unique look to an open dress, throwing it on your shoulders in the manner of a sweatshirt with your sleeves down or collar. Some young women are used as a skirt.

How to tie a scarf-pipe with knitting needles: patterns of rubber bands

Choose the size of the product. Most often take a standard size of 40 x 60 cm. Take a picture and knit a sample, according to which calculate the number of loops and rows. Snood can be created on circular knitting needles as a single finished product or from two canvases, which you will need to sew.

What pattern to choose for a snitch? The product looks great with a volumetric pattern, but unusual gum will also transform the scarf. Let's consider some simple schemes for beginners.

Pattern 1

Eraser made of ornaments. The number of loops must be a multiple of 5 (in the asterisks a part of the rapport is shown, which must be repeated to the end of the row).

• All the odd rows are knit: * 2 purl loops (IP), then go 1 facial (LP), remove the next loop unbroken as the facial (NPL) *.
• All the even numbers begin with * 3 PIs, then 2 LP *.

Pattern 2

Indian twisted column. The number of loops is a multiple of 4 with an additional loop.

• Odd rows start with 1 LP, * then you bind 3 IPs together, then you do not remove the loop, but you sew it with the front one and then again with the wrong one, 1 LP *.
• Even rows are tied with the wrong ones.

Scheme of snitch with braids

Spit any product attached to wealth, splendor. So, how does a scarf-pipe match with knitting needles? The description is simple:

• For the scarf, dial 126 loops and circle them into a circle.
• Snood will contain two patterns: a handkerchief of 9 loops and braids of 33 loops. It is from this calculation that you sew all the scarf loops, beginning with the handkerchief pattern. It will be 3 times to repeat the picture.
• In the 14th row, you need to knit 2 PIs together in the middle of the handkerchief, then you will get 123 loops on the knitting needles. Such reduction should be done in the 108th, 112th, 116th and 118th circles in order to give the product the desired shape.
• After 63 centimeters (120th row) there should be 108 loops left on the spokes, which you close.

The handkerchief pattern on the circular knitting needles is interwoven with the alternation of the front and back rows. To create a braid, work with only 6 loops, the first three of which are transferred to the auxiliary spoke before or after work, tie them face down on the working spoke and do the same with the loops on the auxiliary spoke.

Description of knitting a scarf with a cord

For the product, take 300 g of yarn of 50% wool and the same amount of polyacrylic, in a meter in 100 g is about 60 m. For such a thread you need thick circular knitting needles N 12-15. If you have not worked with these knitting needles yet, practice. Knitting should not be tight or loose. In a 10-centimeter sample there will be only 7 loops and 10 rows.

This is the easiest knitting knitting. Scarf-tube (transformer) completely fits with the facial smoothness and only in certain places holes are made with the help of napids.

• Type 47 loops and knit only 30 rows on the circular knitting needles.
• Each 10th row is tied: * 2 loops together face, make 2 nakida (H), remove the loop as front, tie 1 LP and stretch it through the first shot (SLP), 2 LP *.

Please note that the nakids are tied in the next row by the usual facial. After 30 cm, close all the hinges. The cord is knitted from 4 loops of 1.3 m long and stretches it through the napkin. Sew the hands to the ends of the cord.

Elegant snood

For this model it is better to take bright juicy colors: 200 grams of acrylic with the addition of methanite (in 100 g about 400 m) and as much fancy yarn (100% polyester). In the shaped coils of the footage, the thread will be less - 80 m in 200 g. For knitting the scarf, circular 4-mm needles will fit.

First, make a product pattern. Draw a rectangle with a length of 75 cm and a width of 37 cm. Knitting starts with the length of the scarf with the usual stocking pattern (or facial, or purl loops). Due to the brightness of the color and the combination of yarn of different densities, an elegant scarf-tube (knitting needles) is obtained.

Scheme of alternation of series:

• 23 rows of acrylic;
• One row of shaped threads.

After 70 cm alternate one row from the shaped and acrylic yarn. After 5 cm (this is 6 rows), close the loop. Such a snud can be worn over a classic coat like a poncho or worn like a hood.

Openwork snack

For a delicate pattern, fine yarn is better suited, where mohair is 56%, polyamide 30% and wool 14% and 3.5-milliliter circular knitting needles. It will take only 100 g (in 50 g 280 m). The scarf will be 40 cm high and a circle of 90 cm. Now let's see how a light fishnet scarf-pipe fits with knitting needles. With the description of the scheme, work carefully, as in the even number the rapport of the pattern changes.

Type 180 loops and knit 4 rows of garter stitch. In the fifth circle all the loops will be facial. Here, evenly reduce 4 loops. Then go to the main pattern:

• 1 row: 2 N (in the next row the first cap is removed), 2 N, SLP, 5 LP;
• 2nd row: 3 LP, crossed front (2 LPs tied behind the back wall together), 4 LP;
• 3 row: 2 H, 2 H, 2 LP, SLP, 3 LP;
• 4 series: 5 LP, crossed facial, 2 LP;
• 5 row: 2 H, 4 LP, SLP, 2 N;
• 6 row: 6 LP, crossed facial, 1 LP;
• 7 series: 5 LP, 2 together face (2 VLP), 2 N, 2 N;
• 8 row: 4 LP, 2 LPG, 3 LP;
• 9 series: 3 LP, 2 LPP, 2 LP, 2 N, 2 N;
• 10 series: 2 LP, 2 LPG, 5 LP;
• 11 series: 2 H, 2 VLP, 4 LP, 2H;
• 12 series: 1 LP, 2 LPG, 6 LP.

The main pattern is knitted 39 cm. Next comes a series of facial loops, in which you evenly reduce 22 loops (approximately 7 and 8 loops). On the spokes should remain 154 loops, which in the next 4 rows need to be tied with a placard pattern and close.