Safety precautions in the repair of BTWT

Safety at work is compliance with rules and regulations that are mandatory when located at production sites (and when working with special equipment). The enterprises for the production and repair of BTWT (armored weapons and equipment) from the point of view of security are, first of all, the loading of the territory by transport, armored vehicles and special equipment. Therefore, the main requirement for finding a similar profile at the enterprise is careful and cautious movement between the plant subdivisions.

For incoming to work, an HSE engineer conducts an introductory briefing on safety at work. It highlights the main provisions on working conditions and the specifics of the BTWT repair company, the typical causes of accidents, fires, accidents , etc., as well as measures to prevent them. Next, the new employee will have a primary briefing at the workplace, conducted by the head of the plant's department (shop). To ensure the safety of the production in full, the employee is explained the technological process, provides information on the dangerous areas of machines, the main harmful factors and safe methods and methods of work.

In any production, work is being done with tools and machines, which requires special attention and caution. Therefore, the employee must comply with all precautions on the basis of knowledge gained in the introductory and primary briefings.

Safety at work in any enterprise is based on observance of the following important rules:

1. Before you start working, first of all you check the serviceability of the equipment and the working tool.
2. When working, be sure to use protective equipment and safety devices. Shoes and overalls should be in proper condition.
3. It is necessary to carry out only the commissioned works with observance of all requirements which provides the instruction on safety precautions on manufacture and industrial sanitation.

At the armored vehicle repair plant, the use of a gantry crane for unloading and unloading is implied, so the basic rule that all arriving at an enterprise should know is: one can not pass under a moving crane. It may contain items of working equipment that will fall down when the crane moves. This threatens serious injury to people under him.

Safety in the workplace will remain just a declaration without the use of special protective equipment appropriate to the profession and the work to be done. Control over the procurement and issuance of PPE and related equipment is provided by the health and safety engineer of the enterprise.

Explosion and fire safety in the territory of the BTWT repair plant is achieved due to compliance with the standards for the transportation and storage of propane cylinders and the proper conduct of welding operations.