Replacement brake pads Ford Focus 2. Trust your car only professionals

The appointment of brake pads has long been a secret. As a mechanical component of the braking system, they play almost the main role in the braking process. Worn brake pads "Ford Focus 2" often cause accidents on the road. In addition, extremely heavy wear can cause serious damage to the adjacent parts of the brake system. Pads are the part of the car that should always be maintained in good condition. Timely replacement of brake pads "Ford Focus 2" will help prevent emergencies.

First Signals

The main signal, which signals that it is time to buy new brake pads, is a sound unusual for the normal state of the shoes when braking. On some models of modern cars the system of the notification on a condition brake колодок is established. Depending on the year of manufacture and brand of the car, the systems are divided into mechanical and electronic. The signal of such a system means only one thing - it's time to go to the maintenance station. Also, the first signs of failure of the brake discs are brake fluid leaks and obvious screeching during braking. The softness of the pedal also signals the wear of the brake pads. In this case, problems occur in the hydraulics, and this is extremely dangerous, since violations in this part of the brake system can lead to a complete failure of the brake. Replacing brake pads "Ford Focus" requires a special approach. Most often with her address in the car service.

When to change

Of course, the manufacturing plants stated deadlines much higher than the real ones. In fact, with quiet driving, the pads need to be changed every 20,000 kilometers. When using high-quality consumables, the replacement of brake pads "Ford Focus 2" is necessary every 30 thousand kilometers. However, with a little more intensive use of the procedure is much more often. Do not neglect this, as the braking system ensures your safety. First of all, it's worth it to be safe.

Why savings?

Manufacturers offer many options for brake pads in different price ranges. Trying to save considerably, many drivers get on really poor-quality goods. The purchase of cheap pads often leads to breakage of the brake system or damage to the discs. Before buying it is worth to thoroughly study the market, you can always find a worthy option.

Replacing shoes with your own hands

Replacing brake pads "Ford Focus 2" always begins with the removal of the wheel and turning it out. Then, using a flat screwdriver, the lining is opened, and the piston enters inside.

The replacement of the lining can be done in a newer way - by twisting the caliper by half, thus removing the upper lining, or in the old way - completely unscrew it. Most of all for this manipulation is suitable treshchetka.

The replacement of the pads with new ones must begin with the installation of the inner lining. It must be done so that all three eyelets enter the retainer directly into the piston. After the pad comes in with a click, you can proceed to install the external part.

Now you need to make sure the connection is tight. At the end, the caliper returns to its place. The most important thing at work is to make sure that the brake hose is not too tight or folded. Newer models, disk, are easier to replace, but special rules for dismantling and installation must also be followed.

Replacing brake pads "Ford Focus 2" - a fast and necessary procedure, which is better not to delay. Your safety is in your hands.