Primer-enamel on rust 3 in 1: technical characteristics and reviews

Primer enamel for rust 3 in 1 is an anticorrosive mixture that performs conversion processes and protects, as well as decorates the surface. Such compositions are intended for finishing coloring of metal surfaces that have a clean base or are covered with rust. The application can be made under weather-resistant finishing enamels, becoming part of complex coating systems.

Specifications

Primer enamel in rust 3 in 1 is a suspension of anticorrosive fillers and pigments that dissolve in an alkynically modified lacquer. In the production process, target substances and organic components are added. The mixture can be applied to the elements of industrial equipment, building structures, parts of garages, warehouses, gates, hangars, doors, cover canopies, wrought iron furniture, grilles and decorative fences.

After application, the mixture dries quickly, forming an even and durable coating that is highly resistant to corrosive processes and atmospheric phenomena. On a coating without harm for quality characteristics, oil, technical oils, ethyl alcohol and diesel fuel can be affected . Primer-enamel on rust 3 in 1 is able to cope with the impact of sea and fresh water, as well as gasoline and weak acids.

With this product, you can simplify the preparation of the substrate before staining. The mixture reduces the cost of the technology for the formation of an anti-corrosion coating, without assuming the need to fight firmly associated with rust. Priming before use is not required. Primer-enamel for rust 3 in 1 creates a coating system that, under moderate and cold climates, can maintain its protective qualities for 8 years. This is true when applying two layers of composition.

Reviews about priming enamel "Novbytchim"

If you decide to choose priming enamel for rust 3 in 1 Novbytkhim, then you should review the reviews. Consumers emphasize that the application of the composition can be done on metal surfaces with rust, which is well enough to hold. Its thickness can reach a value of 100 μm.

Simplify the coloring can be a method of using a pneumatic spray, because it combines the functions of decorative enamel, rust converter and anti-corrosion agent. Buyers choose this material also for the reason that with its help it is possible to paint surfaces, cleaning of rust which is difficult for a variety of reasons. Among them, one can distinguish an impressive product area, lack of time and complexity of the profile.

Positive characteristics

Primer-enamel on rust 3 in 1 "Novbytkhim" is characterized by its elasticity and resistance to frequent and sharp temperature changes. The surface can be operated at a range that ranges from -45 to +100 degrees. After application, the surface is protected from corrosion. The work is simplified by the fact that the mixture perfectly adheres to the surface and does not involve additional use of the primer.

Primer-enamel on rust 3 in 1, the reviews on which are presented in the article, can be applied by spraying, which allows to speed up the work, and also make them less laborious. Before carrying out these manipulations, it is necessary to dilute the mixture to the desired consistency. It should be noted and a small expense, which maintains an excellent hiding power. Painting work can be carried out at minus temperatures of the external environment, but the thermometer should not fall below -10 degrees.

Description and characteristics of priming enamel "Prestige"

Primer-enamel for rust 3 in 1 "Prestige" can be used for painting products that will be used in difficult atmospheric conditions. It is allowed to apply this mixture for painting internal surfaces of car parts that have been exposed to rust formation. However, some restrictions should be followed when using primer enamel. Among them, there is a lack of the ability to paint surfaces that will heat up during operation. This recommendation extends to the interior of the premises, which is due to the possibility of an unpleasant smell. Do not use this compound for surface treatments that have been painted with nitro-based materials. This may cause swelling of the coating.

Primer-enamel for rust 3 in 1, technical characteristics of which are presented in the article, should not be applied to both exfoliating as well as expanded coatings. Such formations must be removed before starting the process. If there is a need to get rid of the paint, then you should use a wash.

Mode of application

Before you start using primer enamel, it must be well mixed. The surface is freed of dirt, dust, flaking coatings, as well as rust, which has acquired a state of friability. The surface must first be degreased. If the base or products have been painted with oil or alkyd paints, then it is necessary to clean up to a matt state. Do not apply when the ambient temperature has risen above +30 degrees. Between layers it is necessary to withstand one hour or more. As for the time of complete drying, this period lasts 2 hours.

Conclusion

Above the priming enamel, which has passed the drying step, it is possible to apply a water-dispersion formulation. Dilution can be carried out with solvent # 1 or xylene, until the composition has obtained the required viscosity. It is worth noting that the use of the spray gun during painting will speed up the work, but it is necessary to think about whether to purchase the appropriate equipment or rent it.