Polishing plastic headlights - the car's light will get brighter!

A trip in the night always requires increased attention. Therefore it is important that the transport was well prepared for this. First of all, take care of the bright light of car headlights, which in time can dull.

The reason for the decrease in the luminous intensity of headlamps is the impact of particles of gravel, sand, other materials during movement or washing. After a 50 thousand km run, it's more difficult to drive in the dark, so you'll need to polish the car's plastic headlights. It will help restore their light transmission capacity. It should be noted that this procedure is rather complicated for glass headlights, in case of thorough damage, it is better to replace them with new ones.

Headlight Polishing: can be done by yourself

But the polishing of plastic headlights or polycarbonate is much easier. It is for this type of headlight that there are special abrasive pastes, which contain small solid particles of the corresponding material and a binding base. Such pastes are subdivided into coarse, intended for the initial stage of polishing, when they act on large, deep damages, and soft, by which the scratches on autofarches are removed.

By mechanical action, the upper spoiled layer is removed, the surface is smoothed and the previous light transmission properties are restored. There are abrasive pastes of universal action, polishing of glasses of headlights with their use does not cause necessity of separation of procedures. During processing, the polishing material is gradually destroyed, becoming ever smaller and smaller. Both the primary and final stages are combined in this case.

Polishing plastic headlights with a polishing machine

With thorough and deep cleavages and scratches, it is better not to undertake independently for work, but to turn to professionals. They will, if necessary, use the polishing machine and carry out their work without damaging the car's parts. For this purpose, the headlights are usually dismantled. So you can get access to the processing of their edges, in addition, eliminates the risk of damage to the paintwork of the body around the headlights.

Polishing of plastic headlights with a polishing machine is carried out in a low speed mode. In order for the part not to overheat and not to deform, the treated surface must be wetted with water at regular intervals. After completion of the procedure, the headlamp is gently rinsed and dried.

Proper polishing of the headlights is an excellent result

For a qualitative performance of the operation to restore the original characteristics of the headlamps, the abrasive paste must be chosen with particular care, it is better to consult the professionals first. All the work must be done carefully, strictly following the instructions. Then they will bring good results, and the car will be suitable for trips at night. Polishing plastic headlights will make the car's head light brighter, so that the road lighting will be significantly improved, and the driver's vision load will be reduced.