Pattern for an envelope for a newborn with a hood: features, description and recommendations

Now you rarely see a baby wrapped in a blanket. More and more often mothers purchase or sew a special envelope for discharge from the hospital. This is the right solution, since modern warmed, natural, lightweight fabrics are better than heavy, bulky grandmother's blankets. The shape of an envelope for a newborn with a hood can be different, depending on the purpose, models, material.

Types of envelopes

• Bag. Very simple model in the form of a bag with a hood. Inside - a natural material, outside - waterproof fabric. Fixation of the baby occurs due to Velcro, lightning.
• A blanket. The envelope for a newborn with a hood is a blanket with Velcro, fasteners, zippers. The model transforms into a child, becoming a cone.
• Overalls. The most popular envelope. Up it is made, like a jacket with sleeves, and a bottom - a bag. Suitable for active toddlers.
• Automotive. The model can go either as a bag or as a coverall. The main difference of the car envelope is the account of special slots for seat belts.
• Envelope with a bottom. It looks like the first model, only it has a rigid, dense removable bottom, which allows you to fix the back of the baby. Suitable for young dads who are afraid to take newborns in their arms.

All types of envelopes can be winter, summer, demi-season, with decorations and without them.

Summer envelope with hood for newborns: pattern

Measure out the rectangle 90x80 cm. Mark the middle (45 cm) in dotted lines. Leave from the edges of 20 centimeters. Draw a rectangle (40x90 cm) with rounded corners. This is the basis of the envelope. Immediately note the hood, the lower part.

For the hood measure out 30 cm in the center of the rectangle. On the resulting quadrangle (30x20 cm), draw a trapezoid where the base is 10 cm above the ground and the bottom is 30 cm. The front part is five centimeters shorter. To do this, on the pattern of a quadrilateral (30x20 cm) from the base of the envelope, measure 5 cm, drawing a solid line. By this pattern, you cut out the hood.

It turned out to be a rectangular envelope with a hood for newborns. The bottom pattern can be in the form of a bag or panties. In our case, consider the second option. To do this, from the base of the envelope on both sides, retreat by 20 centimeters. Draw the panties, where the bottom of the legs is placed on the central 10 cm, and upwards - by 25 cm.

To determine the front of the panties, draw a trapezoid 25 centimeters high from the base of the envelope with oval top corners. That is, the upper part of the trapezoid corresponds to 30 cm, is parallel to the bottom of the hood, and the base is 45 cm. This will be the third pattern of the article.

Sewing and sewing a summer envelope

The model is made of soft fleece (1x1.5 m). Stabbing on the fabric of the first sheet of the envelope with a hood and panties. Cut out the detail without taking into account the allowances along the edges.

On the paper pattern, cut out the front part of the hood (including allowance for the lapel) and panties. Puncture with pins, cut off. Now stitch all the pieces. Please note: if the envelope is made from one fabric, the seams go out (decorate with a zigzag or braid).

If you make a template from cotton, fleece, then sew, as usual. First, sew patterns from two tissues among themselves (the back of each other), and then - the hood, panties. At the edges sew up straps, Velcro, buttons.

Who sews badly, just make a bottom, like a sleeping bag (for newborns). The pattern will represent an inverted trapezoid with an oval bottom (30 cm) and an upper (50 cm from the base of the envelope) base.

Such models are good at home: wrap the baby after bathing or before going to bed. Especially suitable for kids who are frightened in a dream and wake up from shuddering hands, feet. Such an envelope does not constrain a child, but at the same time prevents sharp strokes.

How to sew an envelope for a newborn with your own hands in 2 hours

The model is suitable for walking. The pattern is somewhat like the first envelope, but it is an oval of irregular shape. A wide hood, panties give complete freedom to the child, and belts on the belt fix its position.

This is the simplest and most convenient form of the envelope for a newborn with a hood, since it does not require strict patterns. Even the beginning seamstress will cope with the marking of the oval envelope. But a wide hood does not save the baby from the wind, so hit the hat.

Screws and sews on the principle of the first envelope. The base is sewn with a hood, sewn in the middle straps, then panties. The edges are treated with an oblique bake. If you want an unusual envelope in the image of an animal, then choose the appropriate color, material, cut out your ears, sew with a hood.

Pay attention to the following fact. Any appliques, sequins, beads, other ornaments are sewn, and not fastened with glue. Small parts are not located close to the face or hands. The model with decorations begins with their decoration, and then sewing all the pads.

Warm envelope blanket

For a blanket, you need cotton, a sintepon measuring 1.8x1.5 meters, about one meter of oblique bake, 50 centimeters of rubber, 25 and 55 cm long. The shape of a winter envelope for a newborn with a hood is a rectangle (90x85 cm) with a pocket (15x45 cm ).

First, cut out the curves of two parts from all materials, taking into account allowances for seams. Then you pull off your pocket, at the top you put out the kuliska for the gum, turn it out, smooth it over the seam. Insert the rubber band, process the edges with an oblique tack, tie it to the front of the envelope.

The details of the blanket are sewn off, you sew the zippers from the edges, turn them out, the unshielded area is stitched with a hidden seam. Stitch all the seams. Now put the envelope with the pocket down. A long zipper half-button, close the pocket, turning it. Place in a child's envelope, zip up a certain level. A short zip fastens if you need a hood.

What material to choose for a winter envelope

Regardless of whether you sew the envelope yourself or buy it, pay attention to the lining:

• Synthepon is inexpensive at a price, it does not deform when washing, it is easily cut. But it does not heat well, so use it for spring and autumn models.
• Bamboo has the same properties as sintepon. That is, light, resistant to deformations, is not suitable for winter because of low thermoregulation properties.
• Sheepskin is used for removable pads. The material retains heat even in winter. Any unpleasant odors can be eliminated by airing. The material is hypoallergenic, lightweight.
• Goose down on thermoregulation is not inferior to sheepskin, but loses to care for it. Down during washing is rolled into lumps, can get out of seams.

The lining can be removable or integral. For the inside of the envelope, use cotton, chintz, flannel, coarse calico. For the front, use any fabric (fleece, satin, plashevka), just note that the envelope with a smooth surface can slide in the hands.

Knitted models

For a knitting, any pattern of an envelope for a newborn with a hood is suitable. If you select a hook, then the patterns are created exactly from the template, since the product is dense. If you choose knitting needles, then first tie the sample, work on the calculation of loops. You can knit everything with your knitting needles, and adjust the shape with a crochet.

Attach children's panties, blouse on paper and draw a star in the form of a star. Now tie up the pentagon with a single cape. For a basis it is possible to take the scheme of a five-pointed napkin, adding in each row on two columns. Then finish knitting each limb separately. Then you untie the same elements, creating a hood, sleeves, panties. Sew on the button.

You can associate a regular rectangle. As a pattern, take an elastic band or an alternation of facial rows with braids. From one end, sew the corners, getting a hood. Top with a brush. Crochet the edges. On each side, sew on the buttons, the envelope is ready.

The classic model of envelopes

Many mothers do not want to overpay for an envelope for discharge from the hospital, but they want a smart model with ruffles, ruffles. For solemn occasions, you can sew a simple cut and elegant envelope. Choose thick fleece, satin, braid, appliqués, accessories.

Consider the steps for sewing a winter envelope for a newborn:

• Make a pattern of the rectangle 130x69 cm;
• Divide it vertically into three parts after 17, 35, 17 cm;
• Horizontally from below measure on a rectangle of a line through 55, 51, 24 sm;
• Circle the envelope template, where the center rectangle (35x130 cm) is the base of the model with side walls (17x51 cm), the top of the hood is rounded;
• Cut out the pattern on the fabric;
• Grasp the details of fleece, satin from below;
• On the sides sewing tapes;
• Hood with sidewalls treat with ruffles.

It was a festive envelope. Put the child, wrap the bottom, and then tie the side bands.

Popular envelope-overalls

Most often, moms prefer a cover-coverall with a removable lining. The model is a bag with sleeves and a hood. It is convenient for winter. Beginning seamstresses will seem to be a complex pattern for a hooded overall for a newborn , so you need to find precise patterns in special magazines or look for models with a full lining.