Nanoceramics for cars: coating composition and pluses. Service centers

Just a few years ago, the most popular among the protective coatings for car bodies were considered to be wax-based products. Now in the first place came nanoceramics for cars. Let's try to understand the composition of this innovative super-protective novelty.

Every car enthusiast is very fond of his car and wants the state of the paintwork to be always perfect. And very often the quality of LCP is much more important than the technical condition of the car. This is understandable, because it is much easier to eliminate the leakage of oil from the engine than to remove even a small scratch from the body. Today, marketers constantly come up with different protections. Nanoceramics for cars are one of these tools.

Ceramic car body cover

This coating gives the body an aesthetic mirror shine. It also protects against the effects of water and dirt, is resistant to ultraviolet radiation. Ceramic coatings, according to the manufacturers, reliably protect against any scratches and chips, as well as chemical reagents.

But for everything in this life you need to pay. These protective coatings are quite expensive, and they are very difficult to apply.

And many of the funds that are on sale, and can be applied only in a professional box by the hands of specialists. Some products are not sold at all - they are supplied only for workshops.

Why is that? Because nanoceramics for cars are not just polish. This is the result of many years of work of chemists and scientists. In addition, this is not an ordinary composition - it contains nanoparticles. Of course, "nano" is now added to the name of any products. However, in some ceramic protective mixtures, a nano-powder based on titanium dioxide increases the adhesion of the preparation, therefore "nano" is far from being an empty value.

Theory

Now on sale it is possible to find a lot of protective preparations on the basis of ceramics. However, sand is used as the main active substance in them. Of course, not only it, but also silicates are salts of silicic acids. With such a sign everyone. These are alkaline solutions of potassium silicate, sodium silicate . In other words, liquid glass.

This product was first obtained by the German chemist and mineral specialist Jan von Fuchs in 1818. And Mr. Fuchs did not exactly think that the product will not only go down in history, but will also be used as a protective coating for car bodies. Moreover, in those years there were no cars in their present view.

For more than 200 years, chemists have made millions of discoveries and developments, among which are preparations for quartz-ceramic coating. This is a complex mixture of various substances, which previously did not know. In other words - a group of silicon silicones and a lot of other components.

Composition of nanoceramics

Consider a typical product that can be found on the shelves of auto shops. The first element is titanium oxide in an amount of 3%. This compound in chemistry is used for bleaching processes. This oxide is in the meat of squid, in chewing gum and any other white products. Also it is available in expensive paper. And also titanium oxide is found in plastic and in glass. It protects against thermal loads. This property plays a key role, and since the particle size is very small, you can add "nano".

Silicon dioxide is slightly more - 30%. If we consider a substance in a mineral form, then this is nothing else than quartz. The latter is the basis of the coating. Silicon dioxide is a colorless crystal. They are solid enough and strong.

Decamethylcyclopentasiloxane is contained in the preparation in quantities of up to 50%. This is a silicone based fluid. It is resistant to oxidation. In the chemical industry, it is used to clean various tissues.

Also in the composition of nanoceramics can be found and aluminum oxide in an amount of not more than 2%. It is a colorless crystal that does not dissolve in water. It is used for the manufacture of various abrasive or refractory materials. Aloxylisane is present in an amount of up to 12%. It is widely used in the synthesis of organosilicon substances for the manufacture of polymer films.

And finally, the composition of a typical drug includes surfactants up to 1%. They are in any detergents that raise the contamination to the surface of the film. These compounds or similar analogs are used in most drugs. One of the components can be added, unnecessary clean up. But in most cases the composition is just this.

Why do I need a nanoceramic coating

Factory paint and varnish covering of the car is constantly exposed to various negative influences. It does not have the necessary hardness or strength. Chemical reagents from roads, stones from under the wheels, dust and sand, the sun - all this in one way or another harms the LCP.

The original condition of the body can be restored by polishing with the use of abrasive substances, but the original coating will not withstand frequent polishing. After the fourth treatment, the thickness of the LCP will be minimal. And further restoration work can lead to disastrous consequences.

Covering with nanoceramics auto will provide a long and reliable protection against any impacts. Today, this formula based on silicon carbide has no analogues. The coating turns out to be unusually hard and reaches 9H by Mohs. Similar to the characteristics of coatings can reach 7H, but not higher.

After application of the preparation on the body, a powerful protective film with a thickness of up to 2 μm is formed. This indicator is higher than that of any other modern protection. This film can not be removed even with a high pressure washer.

Advantages and disadvantages

The processing of auto nano ceramics gives the body luster, and the color becomes more expressive. The glitter is really well noticeable and lasts for a long time. And about the color of those who used the service, opinions diverge. As a result of processing, a film is formed, and it, one way or another, will change the hue of the LCP. Nanoceramics virtually does not change color, but it affects the color depth. To the merits can be attributed to the fact that the film repels dirt and water.

But this is the characteristics of any other coating. Also there is the anti-graffiti effect - this property is possessed only by nanoceramics for cars. Feedback from those who have processed, only positive. Paint from the can is washed off with plain water. Also among the advantages is the lifetime of the film. Manufacturers and specialists declare that the coating will last 3 years.

Application process

And here the difficulties begin. Unfortunately, nanoceramics for cars are not applied by their own hands. It is better to entrust your car to professionals, the benefit of them today is very much. First, the car is thoroughly washed and the body is cleaned in detail.

Then the whole surface is completely degreased with special preparations. Further polished lights and glass, as well as the body. To do this, use a special clay. After the specialists eliminate the chips, and then polish again.

What next?

At the next stage nanoceramics for auto are applied in several layers (from 3 to 10). And after that, the car is left to dry for 6 to 8 hours. As you can see, getting a quality result on your own will be quite problematic. It's easier and more reliable to entrust the car to professionals, especially since there is now a good choice of service stations that offer similar services.

Service in the regions

Nanoceramics for cars (Voronezh and region) is the company "KVS-Auto". This is a comprehensive technical center that provides a lot of different services. Specialists of this center have long been engaged in applying nano-coatings. The company is located in Voronezh along Antonova-Ovseenko street, 36-D.

Platinum polishing center is a large complex of auto services (including nanoceramics for cars (Ufa)).

Experienced professionals know and are able to apply nanocoatings. Masters use a special preparation with a unique composition. The company is located along Lesotekhnikuma street, 47.

Moscow

In Moscow there are a lot of companies that can apply and treat bodies with nanocaramic compounds. You can apply to the center for the restoration of the car "Defects-NO." Here everything is done as high as possible. This is affordable and at the same time high-quality nanoceramics for cars. Moscow and the region use the services of this company. Reviews are only positive.

The work uses the composition Ceramic PRO 9H, which has proved itself well among other analogues. On average, the price of this service is from 15 to 30 thousand rubles, depending on the brand and overall dimensions of the car.