Mini-sink - cleanliness without problems

Mini-washer is a device that operates under high pressure, designed for car care, belonging to the category of non-professional equipment. Consider what this equipment requires.

Mini-washer is a universal device that helps to clean various surfaces with a jet of water. It allows the use of replaceable nozzles and special cleaning agents. Mini-car wash "Kercher" has found the widest use in cleaning cars, but this destination is not the only one. It is also capable of helping to clean the terrace, garden paths, building facades, swimming pools, roofs, sewage and flow pipes and other. Thanks to its use, the work will be easier, and the amount of water used will decrease by 80%.

Mini-sink has the following main characteristics:

- Pressure. Equipment for domestic use is capable of delivering pressures up to 160 bar. Effective washing of the machine is quite possible at a pressure of about 130 bar.

- Productivity. This characteristic shows how much water is consumed per minute or hour. On average, it takes 7-12 liters per minute.

- Stress. Mini-washer Karcher of household purpose works from a network with a voltage of 220 volts.

- Power consumption. In mini-sinks, an engine with a power of 1.5-2.5 kW is installed.

The company Kercher produces a wide range of household mini-washes, from the initial class to semi-professional. All household appliances are classified in series from the second to the seventh. Usually, mini-washers of entry level are affordable enough, they have small dimensions, light weight, and also are compact. They are designed for short-term and infrequent use. Their main purpose is occasional cleaning of small contaminated sites. The operating life of such devices is limited, the working pressure is quite low - 100-110 bar. Usually their pumps are made of durable industrial plastic, which greatly reduces the life of the device. Water must be fed into the device under pressure, otherwise performance will be significantly reduced.

The most popular is the mini-washing of the middle class, which is most often used for washing cars. Such machines have a much higher resource and performance than the previous class, and their pumps are made of silumin, not plastic. At the outlet, the working pressure is at the level of 120-140 bar. The water in the device can be fed by gravity or under pressure, which does not affect the performance of the equipment.

Mini-washer of the highest class is a semi-professional version, designed to clean up large areas from contamination. In such washers pumps are installed from brass, which significantly increases their service life. At the outlet, a pressure of up to 160 bar can be obtained.

Typically, the mini-wash "Kercher", belonging to the same series, have similar characteristics, only their design and appearance can differ, which does not affect productivity in any way.