Manual and automatic configuration of the Internet from "Kyivstar"

Absolutely any smartphone, which at least with a stretch can be called modern, supports connection to 3G-network. Some even support the 4G-standard, but so far this network is not very developed. In Ukraine, today it does not exist at all, therefore the most actual standard of Internet connection is 3G. In order to use it, you need to be able to configure the service. Today we will talk about this.

Setting up the Internet from "Kyivstar" does not take much time and does not require much effort. More often than not, nothing is required from the user, but everything in order.

Automatic configuration of the Internet from "Kyivstar"

After the purchase of the start package and its activation (usually it requires replenishing it for a certain amount, although it does not even need replenishment) Internet is available to the user in automatic mode. That is, the settings come to the smartphone automatically, they are installed and activated.

Call the operator

If the Network is unavailable after activation of the launch package, then the Internet configuration from "Kyivstar" on "Android" should be made with the help of the operator. To do this, you need to call the operator and in tone mode, go to a direct conversation with him. However, sometimes the Internet settings from "Kyivstar" can be ordered even in tone mode. At least earlier it was possible to do so.

In the phone mode, it is worth explaining to the operator that the Internet does not work, and ask him to send automatic settings. He will ask the model of the smartphone and send the settings. After you will need to accept them. At this, the Internet setting from "Kyivstar" will be completed, and you will be able to enter the Network freely. If it is not available now, then proceed to the next step.

Manual settings of the Internet from "Kyivstar"

First of all, we find the settings for the cellular communication of the smartphone. The "Data transmission" function is responsible for access to the Internet. It must be started (that is, the toggle switch must be active). Now you need to create a profile with manual settings. Depending on the model, the procedure described below may differ. But most often it looks like this:

• Go to the "Menu" - "Options" - "Communication" - "Internet settings" - "Profiles" - "Create a new profile."
• Now it is very important to fill in the fields in the new profile, as described below. In the field "Name" should be entered Kyivstar WAP A & B (without the quotes).
• In the "Access Point" profile, enter wap.ab.kyivstar.net.
• If there remain any other fields, then we leave them at all unchanged.
• Save the profile. Now there is a new account with Internet settings.

Next, select the profile you created as the default profile for the settings. It will be used to transfer data to the Internet. If there is still no access, then you can try to restart the smartphone. This helps, because often after the reboot the new settings take effect. This is true not only for phones, but even for computers. At this, setting up the Internet from "Kyivstar" is completed, and now you will be able to make full use of all the benefits of the Network.

If it still does not work out

Usually the two ways of setting up the Internet from "Kyivstar" are enough. But sometimes users can not connect to the network, even after the done operations. In this case, you can recommend to delete the available data transfer profiles and again ask the operator for automatic settings. It is quite possible that there is a conflict between automatic and manual settings (if manual settings have been entered and automatic orders have been ordered).

Also try to configure the Internet manually again, but very carefully check the correctness of the entered characters. One wrong sign, and there will be no access at all. If again nothing comes out, then again call the operator and ask him to explain the procedure for setting up the Internet from "Kyivstar" on the phone for your particular model. Well, better - go to the salon of this operator. Sellers often do things that help users configure access to the Web.

Even if they do not cope, it means that the problem is in the hardware or software part of the smartphone. If the phone is new, then return it under warranty to the seller. And the old phone, which you can not return to anyone, you can try to reflash. Many smartphones will connect to the Internet only after flashing, but this is difficult to do. Competently refl e phone can not all, so it's worth looking for a good service for reviews.