Laying tiles in the bathroom with your own hands: the sequence of work

Laying tiles in the bathroom with your own hands is a technologically simple procedure, which, however, has some nuances. So, before proceeding to the installation process, you should choose the right material for quality, color and shape. For a bathroom it is necessary to choose such a tile, which will be resistant to moisture and temperature drop. Glossy elements can be purchased for the wall. But for the floor is better to pick matte material, which will not be so slippery to stand. And still need to take into account the height and dimensions of the room. For a high and narrow room, choose a horizontal tile. Then you need to calculate the amount of finishing material, as well as various decor elements.

Laying the tiles in the bathroom with your own hands should be carried out only after the preliminary preparation of the base surface. The walls must be flat, clean and primed. Otherwise it will be necessary to level the base with a putty or plasterboard, which must have a resistance to moisture. To treat with a primer you need both walls and floor.

Before working, it is also desirable to select the appropriate tools. You will need: a container for mixing glue, a drill with a special nozzle or a construction mixer, a spatula with teeth, and a rubber or a small sponge. To ensure that the seams between the elements are smooth, special crosses made of plastic should be used.

Further laying the tiles in the bathroom with their own hands is done very quickly. Lay out the elements should be so that the wall or floor was a harmonious pattern. Glue the first row should be strictly according to the level. Begin the work from the bottom of the wall. To do this, glue the surface and the back of the tile with glue. Next, you need to lean the element tightly to the base and tap it with a rubber mallet so that it will sit well and let the air out from under it. Excess glue around the tiles must be removed. Also, you must immediately clean the seams.

Practically in any apartment, laying the tiles in the bathroom with their own hands is done with the pruning of the material. To glue such elements should be in the place where they will be least noticeable, for example, behind a sink or under a washing machine. Before cutting, tiles should be soaked for several hours in water. In this case, the possibility of splitting the element during processing will be significantly reduced. In the last turn, the square at the door is made out.

Options for laying tiles in the bathroom are different. You can paste material from the middle of the wall, in staggered order, diagonally. It all depends on your imagination, as well as the variety of the tile itself.

After the glue dries, you can begin to finish the seams. Naturally, the mixture should be resistant to water, the appearance of fungus and mold. As you can see, the technology of laying tiles in the bathroom is quite simple, so you can solve this task independently and without any problems. Good luck!