IPhone 4: what to do and how to fix it

If you think that the mobile device iPhone will always work without errors, then we want to upset you: any device on iOS can face software failures. There are situations when the screen on the iPhone 4 hangs, or it reacts, but it happens in an incorrect form. As a rule, few have encountered similar problems, and from this it can be concluded that they do not know what to do in such a situation. In fact, there are several ways with which you can solve a similar problem, and it is about them that we will talk today. After you select one of the options, you can, following the instructions, without any problems to restart the mobile device and bring it to normal mode.

Swap

Let's first deal with the question of how to overload the "iPhone 4" when it is working in normal mode, or rather, no hang-ups, the sensor responds well, all the buttons respond. You need to press the power button of the mobile device, it is also an "awakening". Hold the button until two sentences appear on the screen: "Turn off the phone" or "Cancel this operation". Now you need to touch your finger to the left side of the specified key that appeared on your screen and, without taking your hands off, move to the right. This gesture is usually called "Svayp". If you did everything correctly, then the mobile device should start the shutdown.

Running

Now you need to wait until the phone's screen turns off, after that you should press the power button again, but do not hold it. If all of you followed the instructions, then the logo of the manufacturer should appear on the screen, and the phone will be fully loaded after a while.

But what to do if the "iPhone 4" hangs, but this method does not help you in any way, because the keys do not react? In this case, we need to use the instruction, which we will give below.

The "iPhone 4" hangs, what to do in this situation

Let's now analyze the second option for rebooting the mobile device iPhone. This option can be called mandatory, and it is suitable in the event that the device completely or partially refuses to function in the standard mode.

Remember that you can reboot your communicator from any state, for this you only need to know why the "iPhone 4" hangs, what to do with it and how to bring it back to life.

So, you should press and hold at once two main buttons - Power and Home. Do this for a certain period of time (not less than ten seconds). Even if you keep these two buttons pressed longer, the screen of the device should completely go out. The next step is to release the keys simultaneously. In some cases, the company logo appears at once, the device starts loading, after which the device starts to function in the standard mode.

Unfortunately, this may not happen, but then you need to press the Power button and do not hold it.

If you hang iPhone 4, what do you now know, first of all, try to use a forced reboot option. With the above method, you can perform the described operation not only for the iPhone, but also for the iPad. It is not recommended to use this procedure regularly, only contact it if absolutely necessary, as this can damage the operating system of the mobile device.

Touch Control

Now we'll look at what to do if the reboot attempt does not help. As you already know for certain, you can manage a mobile device without the help of keys. Manufacturers have taken into account that the touch screen can still survive the buttons, but few know how to enable or disable the device in this way, and most importantly, how to reboot it when the device does not respond.

So, the "iPhone 4" hangs, what you do - you do not know, because the traditional controls refuse to work. To switch the device, controlling it only using the screen, you must enable the special Assistive Touch function. That's all we wanted to share in this material. We hope that the above tips will help you in solving the difficulties encountered with the mobile device.