How to weave brakes according to the scheme correctly?

If you are just starting to master the art of weaving bracelets, then you have to learn about how to weave the baubles according to the scheme. It is thanks to the schemes that you can create real masterpieces: bracelets with names and many other interesting things. But how to work with them? How to read? And how not to get confused in the notation?

What do you need to consider when learning?

The main thing that you should pay attention to is the choice of the material with which you plan to work afterwards. For example, it can be beads, floss, string, satin ribbons, colored rubber, etc. Accordingly, each kind of material provides its own subtleties and features of weaving, as well as schemes. Therefore, before you start learning one or another kind of weaving, select the material.

What you need to know when weaving braid from threads?

Suppose, as an initial material, you preferred a string of floss. What's next? And how correctly to weave handbags from color threads? Further it is necessary to study what knots are in the weave, since the creation of bracelets from threads is based on them.

The main nodes in the moulin: node number 1

Node number 1 looks on the diagram as a cross with an arrow and a pointer down. It is deciphered as follows: you have two working threads of different colors (for example, yellow and orange); You take that thread that is located to your left and bend it towards the other, holding the formed triangle with your finger; Push the end of the bent thread under the straight line and tie the knot. Then repeat the same procedure a second time.

If you know the interpretation of the symbols and the actions associated with them, you can easily figure out how to weave the baubles according to the scheme.

Plait of Threads Main Unit No. 2

Node number 2 can be schematically depicted as a cross in which there is a circle with an arrow indicating the direction - to the left downwards. This designation is as follows: before you again two colored working threads; This time you take the one of them that is on the right side, put it on the other; You put the end in an improvised ring and tie a knot. The second node is executed in a similar system.

We understand in the schemes: the main node number 3

Node number 3 in the diagrams is represented as a cross with a circle inside which there is an arrow (it shows the direction to the right and down). Before correctly weaving the baubles with such a knot, pay attention to the position of the arrow in the center of the circle. Look where she points.

There is such a node working according to the following principle: you take that thread that lies on the right and conduct it under the other; Tying the knot; Repeat all the same actions again.

How to weave bracelets according to the scheme: knot number 4

The fourth node is schematically depicted usually in the form of a cross and a circle with an arrow pointing to the left and down. This picture is deciphered as follows: the working thread to the left of you is placed on top of the other left; The end of the thread extends into a ringlet, and the knot is tied. The second time you already put the same working thread under the other one and in the same way you tie it in a knot.

What is the cycle of weaving the baubles?

Before weaving baubles in stages and according to the scheme, we need to find out one interesting nuance. As it turned out, bracelets can be made both in complete and incomplete cycle. So, if the scheme assumes the image of a full cycle, then all the colors of such a broom are located sequentially on both sides of the product.

If the scheme provides an incomplete cycle of weaving, then in the photo you will see a complete mismatch in the color of the threads on the left and right.

Weaving with paired and unpaired number of threads

Do you want to learn how to weave beautiful bracelets? Do not know how to weave the baubles according to the scheme? Read our helpful tips - and you will immediately become all clear. So, on schemes it is often possible to see, that at weaving pair and unpaired quantity of threads or tapes is used. For example, you can have 5 gray and 5 black threads or ribbons, 4 white and 4 red. This weave will be paired. In the unpaired - the number of working threads may not coincide. For example, you can have 5 red and 7 white threads.

How to weave bracelets with inscriptions?

Many craftsmen and masters of one of their first works try to make a decoration with a name or an inscription. Is it difficult to do this? In general, no. However, the creation of such bracelets involves working with a large number of threads in which beginners easily get confused.

Before weaving banners with inscriptions, it is necessary to find a suitable scheme and calculate the exact number of threads needed to create the product. To do this, calculate the number of cells in the first vertical column in the diagram. For example, they turned out 8. This means that for the weaving you need exactly 8 threads.

In addition, it is worth considering the fact that the figure or inscription on the bracelet assumes the use of two kinds of threads or tapes: one of them is used to create a background-background, and the second - for an inscription or a picture. At the same time, the length of the secondary filament or tape should not be large (50 cm is sufficient), and the length of the background thread 2-3 times the expected length of the article. Note that creating a background will require a large number of threads. Therefore, it is better to take a whole skein. As a result, one thread should lead and 6-8 background threads. What else do you need to know before you weave the baubles with the inscriptions?

What else you need to do before weaving a bauble with an inscription?

Before you start the work itself, you need to make some simple mathematical calculations. It is necessary to do this not only to eventually get the bracelet on your hand, but also to correctly place the inscription on the product.

To make it easier for yourself, it's worth writing an assumed name or an inscription on a piece of paper in a cage. Next, pay attention to how many cells it takes. For example, you have 30 cells, which equates to 30 rows. Approximate density of weaving your product is 1 cm of bracelet - 5 rows. Consequently, 30 rows have a density of 6 cm (30/5).

Then measure the volume of the wrist. Suppose that it corresponds to 15 cm. This means that at a length of 15 cm for a bouquet with a text length of 6 cm (15 - 6 = 9) it is necessary to make 9 cm of the main background. If we divide this number by two, we get 4.5 cm on each side. Next, multiply the result by 5 and get the number of rows for the background (4.5 x 5 = 22.5 cm). And only if these conditions are met will the inscription appear in the middle of the decoration. About how to weave braid simple, we speak further.

How to do simple baubles?

It is always better to start with simple products, which in the future will make it possible to master more quickly the more complex weaving technique. So, if you want to make a simple bracelet, then the oblique weave is best for you . To do this, take an even number of threads or ribbons and divide them in pairs in colors. For example, in the middle there will be two blue threads or ribbons, followed by two orange ones (one with one, the other on the other side), the next two green ones, then two violet, two orange and two red.

How to weave a slanting bauble next? Then you need to fix all the threads in the knot and fix them in any convenient way (with the help of an adhesive tape, a pin, an invisible or a money holder). Shoulders should start with the leftmost tape or thread.

Take the first and second thread and, using the knot method, tie both strands together. Repeat this movement with the same threads, and then with the last two (this time the movement with the nodes will be in the mirror image). Then repeat the same procedure with the rest of the strands or ribbons. When working correctly with the schema, you should get the "herringbone" pattern.

How can I make round baubles?

If you do not already know how to weave round banners, we will tell you. The most difficult is considered a straight and round weave, requiring a certain experience. For example, to make a product using a weaving tourniquet (round), you must select the circuit and prepare the yarns (their length should be three times as much as the one reserved for the broom itself).

The simplest version of this weaving is based on working with four threads; For example, it can be two red and two white or multi-colored. Such a weaving is performed strictly according to the scheme: unfold the threads to the sides and tie the two extreme; Then put the first on the second and tie it; The second on the third, the next on the fourth and then in a circle we repeat.

In a word, understanding the schemes is not so difficult. The main thing is to know the general concepts and notation!