Make origami from a napkin on a table

And do you know that the origami method can be applied to table layout? For example, fold a piece of cloth or piece of paper into a beautiful figure and put it on a plate. We suggest you familiarize yourself with how to make origami from napkins on the table (photo attached).

Simple flower

1. Fully open the paper napkin (Figure 1).
2. Place all four corners to the center (illustration 2).
3. Repeat the previous step again (Figure 3).
4. And once again bend the corners to the middle (Figure 4).
5. Turn the square backwards (illustration 5).
6. Now add four vertices to the middle on this side (Figure 6).
7. Hold the corner, pull the tucked part (illustration 7).
8. Now lift this part to make a petal (Figure 8).
9. Repeat steps 7 and 8 with the remaining corners to make four petals (Figure 9).
10. Lift the wrapped triangles upwards (Figure 10).
11. You will receive four more petals (Figure 11).
12. You can leave it that way, and you can still pull out the triangles so that the leaves form (Figure 12).

A simple origami of napkins on the table is ready!

Beautiful butterfly

We present to your attention one more easy way to make origami from a napkin on a table:

1. Fold the napkin in half to make a triangle (picture 1).
2. Turn the top of the triangle (picture 2).
3. Now wrap the right side in half (picture 3).
4. Do the same with the left side (picture 4).
5. Turn the other half of the figure back to get a triangle (picture 5).
6. Fold the shape to make the boat, as in the picture 6.
7. Pull out the bottom part of the figure (picture 7).
8. Flip the part (picture 8).

You got a nice butterfly, which will be appropriate to decorate a plate both on a children's holiday, and on an adult.

Peacock from napkins

Such wonderful crafts origami from napkins to the table - simple (photo above), but at the same time they look pretty beautiful. Operating procedure:

1. Take one napkin and wrap the right and left corners to the middle (Figure 1).
2. Then, once again, fold the left and right side of the napkin to the center (Figure 2).
3. The third time, bend the parts to the middle (Figure 3).
4. Fold the figure in half, which turned out (Figure 4).
5. Unscrew the edge of the top triangle and lift one half, as in figure 5.
6. Now make the tail. To do this, take a long rectangle and fold it with an accordion (Figures 6 and 7).
7. Lay out the accordion and fold the part in half, as in Figures 8 and 9.
8. Fold the edges and straighten the tail (Figure 10).

It remains to connect the tail with the bird and the hack is ready!

Cutlery case

Since we are talking about serving the table, we need to take care not only of the decor of the plate. Cutlery can also be beautifully decorated. To do this, you can make for them a case-origami from the napkin on the table.

Master class on the folding of decorative crafts:

1. Take a tissue napkin and fold it in half (Figure 1).
2. Now fold it in half again (illustration 2).
3. Unbend one edge so that it folds in half (Figure 3).
4. Now tilt the second corner under the first one, just to make it look a little (illustration 4).
5. Turn another corner (illustration 5).
6. Now fold the part in half folds up, as shown in Figure 6.
7. You have a case for cutlery (Figure 7). Put the knife in the furthest pocket, the fork in the second, and the dessert or tablespoon in the third (illustration 8).

This hand-crafted article can be laid out next to the plate, and on top of it.

Unusual Flower

At first glance, it might seem that such origami from napkins to the table is quite difficult. But actually it is not. The work does not take much time and effort. The main thing is to carry it out neatly and then from the first time in a few minutes you will be able to get an odd thing that can surprise your guests.

Operating procedure:

1. Take a beautiful paper napkin and, without unfolding it, fold it in half to make a triangle (Figure 1).
2. Turn the right and left corners to the center line (figure 2).
3. Flip the part back.
4. Turn the peeping edges (Figure 3).
5. Reverse the part and spread it apart (figure 4).
6. Your first detail is ready. To collect a large hand-made article, you will need many similar modules. Make a workpiece. You will also need a paper clip (Figure 5).
7. Fold each figure in a few piles (Figure 6).
8. Take two modules and connect one end to the third. Substitute one more detail and put the fifth on top. Thus, gather a circle in which the last module connects to the last one. You have two rows ready. Continue in the same way to collect the flower (Figure 7). If the craftsman somewhere will crumble, carefully use paper clips.
9. At the end, straighten the tips and collect the figure a little so that it has a conical shape (Figure 8).

Such a magical artwork origami from a napkin on a table can be put in the central part as an ornament.