How to start a car without a key yourself

Every car enthusiast should be ready for all sorts of breakdowns and other unexpected nuances, regardless of the brand, condition and year of release of his car. Take, for example, the situation when you, having gone to nature or found yourself far from home, accidentally lost or broke the ignition key. Such cases, as practice shows, is not uncommon.

So, how to start a car without a key? It would be ideal if at hand was a multi-tester, but otherwise the usual bulb from a flashlight would do. The key inserted in the ignition can have three states: this is the power on and off, and also feeding it to the starter.

Based on this, it is necessary to find three groups of wires. The first ones are those that are powered by the battery, the second ones are given to the car if they are picked up by the first ones, and the third ones by the starter when connected to the first. Usually the second and third groups exist in the form of a single wire, so it will not be so difficult to understand how to start a car without a key.

So, the power is mainly the thickest and brightest wire, in some cases there are several. Grounds are usually black or green. If the power is a bundle, then we check each incoming multicast in it, and in the absence of that, we short-circuit it with a minus and check if there are sparks.

Checked? We continue to understand how to start a car without a key. Now all those wires that give a spark, and the minus should be separated. To find the one that feeds the starter, you need to put the car on a neutral gear and a handbrake. Next, we check the rest of the wiring by connecting to the power supply until the starter starts working.

Next, to start the machine without a key, we connect the power and ground by attaching them with electrical tape. Those wires that feed the starter, we close with the remaining wiring before starting the engine, after which the power must be removed.

In case you need to open a car, you can try to make it with a wire hook. It is necessary to find a regular wire and bend it into the desired shape at an angle of approximately 45 ⁰ , the bent part should not be longer than 10 cm. Then push it between the glass and the window seal near the handle, trying to hook the rod with the button and lift it up. This car door opening is ideal for domestic models.

For the second option, a rope or fishing line loop is necessary. But it is only suitable if the button in the door has a protrusion upward.

There is also a variant with a wire hook for imported cars. Hook must be pushed inside the door, hooked and pulling the handle. You can push the wire if you bend the corner of the door with tools or improvised tools.

If the battery is discharged and the central locking on the alarm can not open the door, you can use the lock cable in the hood, catching it with something and jerking it sharply. If possible, you can connect the power using another battery, by coupling the wires to the car's mass and the starter.

And, of course, the simplest way is to break the glass, if weather permits it.

Now, knowing how to start a car without a key and how to open a door is not so terrible to get into such unpleasant situations.