How to remove cherries from a cherry? Helpful Tips

It is known that in cherry bones contains hydrocyanic acid - a toxic substance that, when ingested in large quantities, causes poisoning. Therefore, no matter how uninteresting it may be to extract pits, it is necessary to remove them, especially if compote or jam is planned to be stored in banks for more than a year. In this difficult matter, all means will only help.

How to remove bones from cherries manually without special devices

To get rid of pits as quickly as possible, the whole family, including children, is involved in the process of their removal. The easiest and most common way is to extract them manually. How to quickly remove bones from cherries without the help of special tools? Everything is elementary: the index finger is pushed into the hole where the twig is attached, and with its help the bone is extracted.

This method, although it is considered simple, does not require the acquisition or preparation of special devices, is completely uneconomical. Fingers, in addition to the stone, squeezed out a large amount of cherry pulp and juice. In addition, hands after this procedure for a long time remain red from cherry juice. Therefore, in order to qualitatively remove the bones from the cherry at home, it is better to use other, more rational ways.

Using a hairpin

Every woman in the house should have a simple hairpin. With it, you can quickly and with the least loss, in the form of cherry juice and pulp, remove the bones from the cherry.

A hairpin with an arc-shaped base is inserted into that part of the berry where the twig was. Bone, in a circular motion, clings to the base and is pulled out with a hairpin. In this way, a large number of cherries can be easily and quickly processed. But still, to clear one kilogram of berries, it will take at least 10 minutes of time.

A pin or a clip?

An alternative to a hairpin is an ordinary safety pin and a paper clip. The principle of action is the same for them. The arc-shaped base of the pin or hairpin is inserted into the opening of the cherry where the stalk is attached, and the stone is pulled outward. It should be noted that you need to use the wrong part of the pin where the clasp is located, and the opposite one.

These are the most accessible methods, how to clear the cherry from the bones. The use of such unpretentious devices can save a lot of time, while the juice does not splash in different directions.

Garlic press for disposal of pits

To remove seeds from cherries, you can also use a press for garlic. For this purpose, the simplest inexpensive model with a special through hole is suitable. Her photo is shown below.

How quickly to remove bones from a cherry with the help of a garlic clasp? In the hole, located on the handle on one side, a cherry is embedded, the attachment point of the peduncle upwards. When you press the handle, the pin, which is on the opposite side, is inserted into the hole and squeezes out the bone. This principle is based on the work of all similar mechanical devices for processing cherries from bones.

A simple way to remove bones from cherries

For this method you need a bottle with a narrow neck and a stick (you can take a sushi stick or a cocktail tube). How to remove the bones from the cherry with their help?

On top of the narrow neck is laid cherry, a hole from the attachment of the peduncle up. In this place it is necessary to press a stick and pierce the berry. Thus, the bone will be in the bottle, and the peeled cherry remains on the neck. A wooden stick, a cocktail tube or a match - any object that can push a stone out of a cherry will do.

Mechanical seed separator from cherry

Since it is difficult to remove the bones manually from the cherry, it was invented special mechanical devices to facilitate the work of the housewives. Outwardly they look different, but the principle of action is the same for all.

The machine for removing seeds from cherries is arranged as follows. In a special place with a through hole, each berry is placed separately, after which the stone is pushed out by simple pressing. Such a method has undoubted advantages. Firstly, in order to pull a stone, you do not need to catch it with a pin, pin or fingers. In any case, it will be squeezed out of the berry. Secondly, even in such a case, how to remove bones from a cherry, skill is needed, and with the help of this device it will take quite a bit of time to carry out this action.

This mechanical method of getting rid of bones, like all the previous ones, has several obvious drawbacks. Every berries must be inserted evenly into the separator by the peduncle upwards. In addition, hands are dirty anyway. In addition, with such removal of stones there are losses in the form of pulp and juice.

To date, the only true alternative to the previously proposed methods is the removal of pits with the help of a special device designed for a large volume of berries.

Special machine for removal of cherry pits

To handle a large volume of berries at home, a special mechanical device for removal of the "Cherry" pits is suitable. It is made of food plastic. It has a tray where the berries intended for processing are filled, and a container for the removed bones. Ready-made peeled berries fall into a container, set to the device. The main advantage of this device is that it minimizes the contact of hands with juice.

The machine for removal of stones from the cherry has a rubberized underneath on the bottom, which allows it to be firmly fixed on the table. It is very convenient compared to other devices that you need to keep in your hands.

How to clean the cherry from the bones? In the tray located at the top of the device, pure dried berries are laid. Now, with one push on the ejector, the processed finished cherry is poured out through the groove into the substituted container, and the bones are in the container at the bottom of the device.

Using a special machine for processing cherries from pits allows the most rational use of spare time, since this method is the most effective and effective.

Large plants use automatic machines for processing berries. They are designed to remove pits of a large amount of cherries (up to 90 kg per hour). Such heavy machines are not used at home.

How to make a device to remove pits?

Many craftsmen prefer not to buy an expensive device, but make it themselves, especially since the principle of their operation is the same. With it, you can quickly remove the bones from the cherry.

The device is made of a tube with a diameter of 22 mm and a wall width of not more than 1 mm. It can be metal, for example, aluminum, stainless steel or plastic. It is important that the metal that is used in making the pipe is not oxidized, as this can affect the taste of berries.

The spring can be taken from a mechanical toy. It should ensure the soft work of the device: it is good to push and quickly go up in the opposite position.

The homemade machine consists of a small tube about 7 cm in length and 22 mm in diameter, a special hole 10 mm in diameter, where the berry will be placed, and a pusher with a spring, which can be used as a normal nail. The principle of operation of such a device resembles a ballpoint pen operating on a spring. With a push of the pusher, the stone is squeezed out of the cherry, after which it returns to its original position.

All the above ways of how to remove bones from cherries are effective in their own way. In this case, each hostess will choose for herself the most suitable optimal option.