How to properly plaster the foam blocks - simply, beautifully and without flaws!

Everyone who wants to change his home faces the need for internal and external repairs. One type of finishing is plaster. This process is an integral part of any repair. But the question is how to properly plaster the foam blocks.

Before starting work it is necessary to check the surface for the presence of holes and irregularities. The next step is to coat the wall with a primer. After the entire wall is covered with a primer, allow it to dry a little, in the meantime, dilute the dry plaster mixture as indicated on the package, and you can start working. But those who are unfamiliar with this mechanism, it is better to seek help from a specialist who knows how to properly plaster the walls of the foam block. When working with this material, it is necessary to take into account certain features, ignorance
Which will not bring you the desired result. When working with a brick wall, it should be noted that it absorbs twice as much moisture. As a result, the moisture is evenly distributed between the plaster mixture and the brick wall, providing a reliable coupling. With the walls of the foam block everything is much more complicated. How to properly plaster the foam blocks in this case? The wall absorbs all the moisture, and the plaster has a risk of remaining dry and crumbling. To avoid such problems, it is necessary to use a primer. But you can do without it, enough to sprinkle the wall with a liquid solution of plaster. This method is the most reliable and more economical compared to others. Now, knowing how to properly plaster, you can proceed to the next step. Do not wait for the complete drying of the liquid to be applied to the wall of the plaster. Thanks to this method, the adhesion of plaster to the wall increases, since moisture only contacts the foam block by 20%. All the remaining moisture is distributed evenly over the surface of the wall, as well as in the case of a brick wall.

Now a little about the primer. How correctly to plaster the foam blocks after using the primer, if you chose a liquid mixture of plaster and a primer after all the second option? Then you should know that it is better to avoid acrylic plaster. Its minus is that it completely deprives the wall of moisture, as a result of which all it accumulates on the plaster. And over time, the moisture left on the plaster layer evaporates, and the wall becomes dry. It does not get that wet balance that is necessary for a good grip. As a result, the plaster crack and crumble.

As the plaster dries long enough, it is necessary that the room has good air exchange and an acceptable temperature. This is the temperature range from +3 to +30 ° C.

From all of the above, we can conclude that the only true and less costly solution will be the preliminary spraying on the wall of a liquid solution of plaster.

That's basically all the features of applying the plaster to the walls of the foam blocks. Using this knowledge, you can easily answer all questions regarding how to properly plaster the foam blocks. This will make the surface of the walls more even, beautiful and flawless. The whole process is not as complicated as it seemed at first glance, but still requires the expenditure of time and effort. The technology of plastering is quite standard and does not differ much from the usual, which is developed for most building materials.