How to open ports via torrent: the simplest solution to a problem

For the operation of very many online applications and games, the system of access to resources is based on the recognition of ports. And not all users know how to open ports via torrent on Windows 7 or in any other system. Torrent in this case acts as an additional, rather than a fixed asset. Further it will be clear why.

What are ports and why are they needed?

What is a port? In fact, a port is, roughly speaking, a tunnel through which a link is made between the online resource and the end user. And it's also a secure channel with its own data encryption system.

In this case, it is about encryption of AES, which is common in the world of computer technology, with the only difference that it can mean a cryptosystem based on 128 or 256 bits of coding.

It is not always possible to open the desired port on the computer. For the most part, this is due to the built-in Windows firewall. In principle, opening the required port in the firewall settings is done elementary (this will be considered later). If it is impossible or unwilling to deal with system settings, you can solve this problem in another way using torrent applications. How to open ports through a torrent? Yes, it's very simple! Initially, you need to know at least the corresponding port number.

How to open ports via torrent: what should I do initially?

The first and most important thing to do is use the firewall settings. While the issue of how to open ports via torrent on Windows 7, let's leave alone, and consider the capabilities of the system itself without the use of torrent clients.

First of all, you should check the ports themselves, present in the system and subject to activation. You can do this by means of the command tetstat -a, which is entered on the command line, called by the cmd line in the "Run" menu (Win + R).

Next, go into the "Control Panel" and select the firewall settings in it. There you need to create a new task with the TCP protocol in the advanced security settings mode.

How to open ports via torrent for Meincraft and other network games?

Now the most important thing! First, we create a new rule. After that, follow the instructions of the "Master" (in principle, nothing much to change it is not necessary), but only the port number is set manually. For the game "Maincraft" is the number 25565, for KMS - 1688, etc.

In principle, after such procedures, especially when modifying the corresponding access rights settings on the router (router or ADSL modem), the problem of access to online resources will disappear by itself.

Practical use of torrent programs and their settings

Now let's take a look at the programs called torrent clients. The most popular utilities are uTorrent and BitTorrent. The settings of the programs are identical, so the solution to the question of how to open ports via torrent on Windows 8, 7, XP or 10 is applicable to the programs both ways.

So, run the program and look in the settings section at the incoming connection point. If there is a "bird" in front of the line or the line is marked in red, apparently the connection is blocked, regardless of the selected or available port. Use the right click and select the test line. If the test fails, go to the firewall settings.

In the client parameters themselves, solving the problem of how to open ports through the torrent, you need to specify the port of interest, and then, what is very important, perform the following settings:

• In the field of accessibility UPnP mapping - do not put a "tick";
• In the field of NAT-PMP setting - "tick" is required;
• In the section Randomize "checkboxes" to remove;
• Windows Firewall exceptions is required.

Security Systems

But this solution of the issue, for example, how to open ports through the torrent for "SAMP", does not end. In addition to the built-in firewall system, anti-virus software can also block the required port or resource.

To avoid this situation, unlike the firewall, which involves adding only programs and applications to the list of exceptions, you will have to specify here the official site of the same game, that is, to show the scanner that this source on the Internet is trustworthy.

What you need to know more

Naturally, if the question of how to open ports through the torrent, after all the above solution was not found, you should enter the settings of the router (router) and already there to engage or disable some functions like UPnP. However, this may be due solely to ZyXel routers. As practice shows, interference with other devices of this type is not required.

But sometimes it may be necessary to run the configuration settings by connecting the router directly to the computer or laptop, then use any available Internet browser, where 192.168.0.1 or 1.1 is entered in the address bar as the last two digits. Apparently (which is applicable even to modems), you will have to set up communication methods and the number of open ports that can not be blocked manually. In addition, special attention should be paid to the means of connection. In this case, the torrent client, which is available in the user's system, does not affect the connection. It is clear because if the port is blocked on the router, no program can bypass its settings.

From here you can make an unambiguous conclusion: before you deal with the settings of the torrent client, you need to make sure that the selected port is accessible from the system itself and is not blocked. In all other respects, the firewall configuration is used first, and only then the client program.