How to make wigwam for children with their own hands?

Perhaps, all parents sooner or later have to do wigwams for children with their own hands. This structure is in the form of a cone, consisting of a simple skeleton and a cover stretched from above. In this case, there is no need to completely cover the entire structure. In the upper part of the real Indians left the hole always so that the air circulated better and sunlight penetrated into the room.

Such designs do not take up too much space, and if you set the wigwas neater, make it folded, you can easily move it to some other place or just remove it. It is from the parental fantasy and considerations of expediency that the degree of proximity of the home wigwam to the original design will depend.

Selection of materials

In the process of selecting the right details, one should not forget about the decorative elements, pillows and bedspread that will make the home wigwam more practical. Garlands, pompons, feathers, beads, pebbles and even appliqués will serve as wonderful decorations if parents build wigwams for children with their own hands.

Interesting features of the wigwam

In children such constructions cause real delight. If there is a need, any tepee can easily assemble, disassemble and move the hut to any convenient place. The wigwam can be installed on the street and in the children's room. Care of such huts is very simple. Vigamam is not afraid of dirt or stains, because if necessary, you can simply remove the coating from the frame and wash it. Do not have to think long about how to make a wigwam for children, as the technology of creation is elementary. All the manufacturing steps will take several hours.

How to sew wigwam for children?

Stock up with thin bamboo or ordinary chopsticks, if the installation of the wigwam is planned in a dwelling. Their optimum number for the most spacious hut - nine pieces. In the place of the supposed intersection, these rods need to be fixed with a rope. The rods are set not pressed against each other, but inclined by 25 degrees so that a shape resembling a cone is obtained. Then you need to fix the base with additional sticks, tying them to each rack. To make the wigwam as high as possible, you need to use the rods more authentic. For a better bundle, you can drill holes in them and hold a rope there.

The next step will need to determine the coverage of the structure. For this, simple pieces of fabric or a specially sewn case are used. For the production of the latter will need a pattern of wigwam for children. The sewing process is very simple and does not require special skills. Segments of this cover have the form of triangles. To calculate the necessary dimensions, make a measurement of the openings between the rods.

Decoration

In accordance with the style of the wigwam, decor elements are prepared. Tulle or cotton fabric is often used in such cases.

We design the entrance

To correctly make the entrance to the wigwam for children with your own hands, on the outer edges of the cover you need to cut two semicircles at the same distance from the small central recess for the smoke. These holes are connected when assembling the wigwam and form a convenient entrance. To make a door to your wigwam, you have to cut out a piece of fabric, the diameter of which is slightly larger than the opening for the entrance, hem its edges, while inserting some rounded rod to hold the desired shape. To attach the product you need to attach a loop. This makes it possible to hold the door on any stakes after installing the wigwam.

Additional fastenings

To make a good wigwam for children with their own hands, you need to provide a way to connect the fabric with the frame. Additional hinges are attached to the lower edges of the cover if the wigwam is to be installed on the street. They will promote good tension. Also, additional fasteners need to be built in the central semicircle and at the points of contact with the rods, so that the cover fits as best as possible on the frame.

Top and bottom of the wigwam

To cover the hole in the center of the wigwam, you can use two triangular pieces of fabric. The short side is sewn to the semicircle on opposite sides. Such a device can be used as a chimney and protect the wigwam from rain.

A five-centimeter piece of rope can be attached to the center of the straight edge in a semicircular groove to connect the wooden rods to the tarpaulin. Tent pegs need to be stuck in the ground and connect them to the bottom edges of the boot. Inside the wigwam, you can place the two remaining laps. They will contribute to the removal of smoke from the hut, when the fire will flare up. Now everyone can understand how to sew wigwams for children with their own hands.

What kind of rods can I use on the street?

To learn how to make wigwams for children with their own hands on the street, it is enough to get acquainted with the material outlined below. First we will understand with the elements of the frame, without which it will not be possible to manage. You will need a rope, long enough branches or PVC pipes. You can also use ordinary curly vegetation.

To build a frame in the yard you can use the stems of a sunflower. It is necessary to first plant them in the spring along a circle specially drawn on the ground. There is nothing difficult in making wigwams for children with their own hands. Photos of such buildings are presented in the article.

It should be noted that these huts are not used immediately, but after some time. You can start their construction at the beginning of the spring period. Pipes or branches should be installed in the form of a triangle, and then connect the top with a rope. After the carcass assembly, seeds can be sown. On a circle of a planned design it is necessary to plant abundantly climbing plants. When the bushes begin to ascend, it is necessary to adjust their further development in accordance with the shape of the hut frame.

PVC pipe hood

From PVC pipes it is also possible to construct wigwams for children with their own hands. Patterns for a cover are created on the same principle, as in the above examples. In fact, such a wigwam differs only in the material from which the elements of the carcass are created.

Using a ladder

The function of the frame for the wigwam will be performed by an ordinary stepladder. It's enough just to put the ladder in the place reserved for children's entertainments, and cover it with some kind of cloth so that the access to it is only on one side. The stepladder can be installed both in the house and in the yard. This version of the design of the wigwam is distinguished by its mobility.

Conclusion

All children need space for entertainment and games. A wonderful solution for this is a hut, created by own hands. The technology of erecting a frame is not anything complicated and can be realized by everyone. The wigwam pattern for children is also very simple, so a suitable cover is easily created.

If there is no such possibility, it is possible to hang ordinary pieces of fabric, curtains, curtains and the like materials that are on hand on the frame. A lot of money and time for this will not have to be spent. You can install such a hut in the house, at the dacha and in any other convenient place. For greater practicality, you can design a special shelter from the rain, the door and appliances for removing smoke. Thanks to the materials outlined in the article, every parent can learn how to make wigwams for children with their own hands correctly.